Accessible India Work At Epfo Main Office Building, Patna EARTH WORK 1.1 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 1.00 cum 2161.20 2161.00 2 CEMENT CONCRETE (CAST IN SITU) 2.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 2.1.1 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 1.00 cum 7365.15 7365.00 3 MASONRY WORK 3.1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : 3.1.1 Cement mortar 1:3 (1 cement : 3 coarse sand) 24.00 sqm 862.90 20710.00 4 CLADDING WORK 4.1 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 180.00 sqm 1063.45 191421.00 5 WOOD AND P. V. C. WORK 5.1 Providing and fixing aluminium tow 5.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5.1.1 150x10 mm 12.00 each 75.55 907.00 5.2 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5.2.1 125 mm 24.00 each 60.05 1441.00 Schedule of quantity 45 5.3 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturers specification and direction of Engineer-in-charge. 62.00 metre 481.85 29875.00 5.4 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be s 5.4.1 Decorative finish (both side wood grained finish) 23.00 sqm 3194.40 73471.00 6 STEEL WORK 6.1 Providing and fixing stainless steel ( G 8 FINISHING 8.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 8.1.1 New work (two or more coats) over and including water thinnable priming coat with cement primer 95.00 sqm 162.55 15442.00 8.2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 95.00 sqm 123.85 11766.00 9 REPAIRS TO BUILDING 9.1 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge. (a) Internal Work- Exposed on wall 36.00 metre 2.85 103.00 10 Dismantling and Demolishing 10.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 10.1.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 1.00 cum 2007.10 2007.00 10.2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 10.2.1 In cement mortar 1.00 cum 1698.45 1698.00 10.3 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 10.3.1 For thickness of tiles 10 mm to 25 mm 485.00 sqm 60.50 29343.00 10.4 Dismantling old plaster or skirting raking out joints and cleaning the surface for p 10.5 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 10.00 cum 219.35 2194.00 11 ROAD WORK 11.1 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineerin- charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 11.1.1 Overhead informatory road signage 15.00 sqm 5609.55 84143.00 11.2 Providing and applying 2.5 mm thick oviding and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 11.00 sqm 1250.75 13758.00 11.4 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 80.00 sqm 1719.00 137520.00 12 SANITARY INSTALLATIONS 12.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 12.1.1 White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap 12.00 each 2965.60 35587.00 12.2 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W. .3 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 8.00 each 886.25 7090.00 12.4 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 8.00 each 1411.15 11289.00 12.5 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 8.00 each 204.70 1638.00 49 12.6 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cove 13 WATER SUPPLY 13.1 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 13.1.1 15 mm dia nominal bore 24.00 metre 485.20 11645.00 13.1.2 20 mm dia nominal bore 12.00 metre 541.10 6493.00 13.2 Providing and fixing uplasticised PVC connection pipe with brass unions : 13.2.1 30 cm length 13.2.1.1 15 mm nominal bore 20.00 each 74.80 1496.00 13.3 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 13.3.1 15 mm nominal bore 8.00 each 262.30 2098.00 13.3.2 20 mm nominal bore 8.00 each 289.05 2312.00 13.4 Providing and fixing PTMT grating of approved quality and colour. 13.4.1 Circular type 13.4.1.1 100 mm nominal dia 8.00 each 33.20 266.00 SH-14 NON SCHEDULE 14.1 Providing and laying Rustic vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 14.2 Providing and laying rustic Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm 50.00 sqm 1135.20 56760.00 14.3 Providing and fixing C.P. angular stop cock of jaquar brand , product code- CQT-23053 & Fixing As per Engineer - in - charge . 20.00 each 836.30 16726.00 14.4 Providing and fixing C.P. brass jaquar two way bib cock of brand code - CQT -23041 AND AS Per Engineer - in- charge . 8.00 each 1194.15 9553.00 14.5 Providing and fixing health faucet of Jaquar branf code ALD-CHR-573 , SHOWER with 1m long flex tube in chromium finish & wall hook and as per Engineer - in - charge . 8.00 each 268.32 2147.00 14.5 Providing and fixing C.P. brass jaquar Bib cock of brand code - ARI-CHR-39037 as Per Engineer - in- charge . 8.00 each 2068.75 16550.00 14.6 Providing and fixing swing up S.S Toilet Grab bars in PH Toilets of size 30 x 8 (weight 2.25 kg) make : - kosmocare or equvilant 4.00 each 5034.00 20136.00 14.7 P/F SS Grab bars in PH toilet 18 make - pedder johanson or equivalent
