Installation Of Children Play Equipments In Jogi Siddiaha Park In Ward No 27 Tender Title- 1 Relax Swing Is Made Up Of A-Class Structure Materials. The Top Beam Is Made Up Of 50Mm Nb M.S A- Class Pipes Housing 2 Bearing Sockets Each Containing 2 Ball Bearings. The Corner Brackets Are Made Up Of Cast Iron. The Structure I.E., The Legs Is Made Up Of 40Mm M.S A- Class Pipes. The Seat Is Made Out Of 50X25 Mm 18 Swg Cr Pipes. The Chains Are Of 25Mm X 12Mm X 5 Mm. Above Equipment Is Duly Redoxide And Painted In Multi-Color With Foundation Extension. ( Tsw 07 ) Safe Area Is 12€™ X 7€™. 2 Apple Whirl Is Made Up Of A-Class Structure Materials. The Center Shaft Is Made Up Of 100Mm Nb M.S Pipe Housing A Set Of Ball Bearing And Taper Bearing. The Platform Is Made Out Of Aluminum Antiskid Platform 1.5 Mm Thickness. The Height Of The Equipment Is 2.5€™ ( After Installation ) , Spinning Diameter Of The Equipment Is 4€™. The Seats Are Made Up Of Recycled Plastic. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. ( Trv 05 ) Safe Area Is 8€™ X 8€™ 3 Duck Swing Is Made Up Of A-Class Structure Materials. The Structure Is Made Up Of 32Mm M.S A- Class Pipes. The Chains Are Of 25Mm X 12Mm X 5 Mm. The Length Of The Equipment Is 8€™. The Ducks Seats Are Made Of Fiber Reinforced Plastic. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. Safe Area Is 12€™ X 7€™. 4 Std Frp Slide Is Made Up Of M.S A-Class Structure Materials. The Sliding Portion Is Made Up Of Fiber Reinforced Plastic. The Structure I.E., The Ladder Is Made Up Of ( Main Footings ) 25Mm Nb And Steps Of 20Mm Nb M.S A- Class Pipes. The Railings Of The Ladder Are Made Up Of 20Mm Nb M.S A- Class Pipes. The Height Of The Platform Is 5€™ And The Sliding Span Is 10€™. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. Safe Area Is 20€™ X 4€™. 5 Rope-Climber Is Made Up Of A-Class Structure Materials. The Structure Is Made Up Of 40Mm Nb M.S A- Class Pipes. The High Quality Nylon Rope Is Used. The Connecting Balls Are Ldpe. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. Safe Area Is12’ X 8€™ 6 Donald Duck Rider Is Made Up Of A-Class Structure Materials. The Riders Are Fiber Reinforced Plastic / Ldpe. It Is Supported By Heavy-Duty Coil Spring. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. Safe Area Is 5€™ X 4€™ 7 Arch Seat Wheel Is Made Up Of A-Class Structure Materials. The Center Shaft Is Made Up Of 100Mm Nb M.S Pipe Housing A Set Of Ball Bearing And Taper Bearing. The Seats Are Made Up Of Recycled Plastic. The Platform Is Made Out Of Aluminum Anti-Skid Platform 1.5 Mm Thickness. The Height Of The Equipment Is 2.5€™ ( After Installation ) . Spinning Diameter Of The Equipment Is 5€™. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. Safe Area Is 10€™ X 10€™. 8 Fish Rider Is Made Up Of A-Class Structure Materials. The Riders Are Fiber Reinforced Plastic / Ldpe. It Is Supported By Heavy-Duty Coil Spring. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. Safe Area Is 5€™ X 4€™ 9 4-Seater See-Saw Is Made Up Of A-Class Structure Materials. The Main Beams Are Made Up Of 65Mm Nb M.S A- Class Pipes. The Structure I.E., The Legs Are Made Up Of 32Mm Nb M.S A Class Pipes Housing A Heavy Duty Metal Bush Of Pivot Type Mechanism.. The Seats Are Made Out Of Cr Sheet Of 10€™Â€™ X 8€™Â€™ Of 18 Swg. Handles Are Made Up Of 15 Mm M.S A Class Pipe. The Above Equipment Is Duly Red-Oxide And Painted In Multi-Color With Foundation Extension. Safe Area Is 10€™ X 6€™. 10 The Moon Walker Made Up Of D100mm Nbms Pipes The Substructures Consists Of 40Mm Nbms Pipe And Heavy Duty Bushes Pivoted To 1 End And In Walking Motion. The Footstep Is Made Up Pressed Sheet Metal Of Heavy Gauge. It Provides To Side - By - Side Exercises Position Which Deliver Cardiovascular Vascular Benefits By Simulating The Running Motion, Although With Straighter Legs And No Impact. The Exercises Completely The Avoids The Impact Stress Runners Often Experiences On Feet, Knees, Hips And Lower Back. Many People Cannot Tolerate The Jarring Motion Of Jogging Walking Is A Good Alternative. But It Does Not Stretch Are Fully Activate The Important Muscle In The Upper Thigh The Air Walker Improves Both Cardiovascular Fitness And Flexibility, Exercise Levels Can Be Of 5 To 15 Minutes Duration . Experiment With Various Speed And Different Levels Of Stretch. The Above Equipment Is Duly Powder Coated. 11 Supplying & Fixing Open Gym Equipment €“ Waist Twister Triple Made Up Of Tubular Steel Of 2.5Mm Thickness, All Galvanized And Zinc Dipped, Joints Are Robotic Welded, All Welded Joints Are Scalloped As Necessary And Welded To A Approved Mig Process. All Welds Are Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Noble €“ Grade Wall Powder To The Thickness Of 80 To 120 Microns. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accordance To Iso 7227 To Handle Corrosion For 3000 Hours. High Quality Grip Rubber Is Used For The Handles, Maintainance Free Ball Bearings Scope Of Delivery : 1 Completely Free Assembled Equipment Model. Maintain According To En 16630 And As Per The Maintanance Guide. All Product Must Be Tested And Certified To Meet En 16630 Safety Standards With Gs Test Mark. The En 16630 Certificates Must Be Issued By A Reputed Notified International Ceritifying Agency Such As Ipema, Tuv, Cpsc Or Sgs Only. The Gs Mark En 16630 Cerificates Mut Be In The Name Of Tendering Party And Not Any 3Rd Party. All Products Must Clearly Display The Gs Mark As Issued In The En 16630 Safety Certificates. Size 1460*1310*1150 Mm ( Min ) , Weight 39.1Kgs ( Min ) , Safety Area 4360*4510 Mm ( Min ) , Capacity 3 Person. 12 Supplying And Fixing Of Elliptical Machine Of Safe Area : 3 Mtr X 1.5 Mtr, Main Frame : 100 Nb Gi B-Class Pipe, Bottom Frame : 40 Nb Gi B-Class Pipe, Handle Frame : 32 Nb & 15 Nb Gi B-Class Pipe, Handle Cover : Tpee Injection Moulded, Foot Rest : Lldp Plastic, Pipe Cap : Nylon 66 Injection Moulded, Bearing Cap : Nylon 66 Injection Moulded Bearing Housing And Pin :Seamless Pipe & Round Bar, Nut Bolts Cap : Nylon 66 Injection Moulded, Bearings : Permanent Sealed Of Reputed Make ( Fag / Skf ) , Nut Bolts : High Tensile Steel, Galvanised Nut Bolts, Powder Coat : Done By Pure Polyuretane Powder With 70 - 80 Micron Thickness As Per Engineer Incharge Of The Work. 13 The Fun Rider Made Up Of 100Mm Nbms Pipe. The Sub Structure Consists Of 40Mm Nb Ms Pipes And Heavy Duty Bushes Pivoted To One End And Movable In Lateral Motion. The Seat Is Made Up Of Pressed Sheet Metal Of Heavy Gauge. Fun Rider Station Involves Cardiovascular Benefits Using A Rowing Motion. This Apparatus Promotes Strengthening The Biceps, Latissimus Dorsi, And Rear Deltoids In The Pulling Motion, While Also Developing Cardiovascular Fitness; Exercise Levels Can Be Of 5 To 15Minutes Duration, Experiment With Various Speeds And Different Levels Of Intensity. The Above Equipment Is Duly Powder Coated. With All Lead And Lift Loading And Unloading As Per The Direction Of Engineer In Charge Of Work 14 Supplying And Fixing Of Ski Walker Of Safe Area : 2.5 Mtr.Dia, Main Frame : 3€ X 1€ Pipe, Handle Frame : 20 Nb Gi B-Class Pipe, Rollers : Lldp Plastic, Pipe Cap : Nylon 66 Injection Moulded: Nylon 66 Injection Moulded, Seamless Pipe & Round Bar, Nut Bolts Cap : Nylon 66 Injection Moulded, Bearings : Permanent Sealed Of Reputed Make ( Fag / Skf ) , Nut Bolts : High Tensile Steel, Galvanised Nut Bolts, Powder Coat : Done By Pure Polyuretane Powder With 70 - 80 Micron Thickness As Per Engineer Incharge Of The Work.
