Augmentation Of Drainage Capacity Of Raichak Sluice On Left Embankment Over Kalimondop Khal At Mouza- Mohar, Block And P.S.- Sabang, Dist. Paschim Medinipur In Connection With Kkb Basin Drainage Scheme
Tender Value
24.56 Lakhs
Estimated cost
Bid Submission
10 Mar 2022
0 days left
EMD
49137
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sabang → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Augmentation Of Drainage Capacity Of Raichak Sluice On Left Embankment Over Kalimondop Khal At Mouza- Mohar, Block And P.S.- Sabang, Dist. Paschim Medinipur In Connection With Kkb Basin Drainage Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD. |
| 2 | By Manual Means |
| 3 | Cement Concrete |
| 4 | Dismantling Brick/Tile Work Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD. |
| 5 | Cement mortar |
| 6 | Taking out sluice gate draw shutter gearing arrangements & pedestal including refitting the same with new nuts & bolts where necessary |
| 7 | Up to 4 sqm. |
| 8 | Taking out only. |
| 9 | Taking out runner of any section including cutting bolts and nuts, dismantling existing concrete or brickwork where necessary. |
| 10 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 for Rural Roads of MORD. |
| 11 | Above 600 mm to 900 mm dia Hume pipe |
| 12 | Carriage of RCC pipes over pucca road upto 900 mm diameter |
| 13 | Distance up to 5 Km |
| 14 | Above 5 Km up to 10 Km |
| 15 | Above 10 Km up to 20 Km |
| 16 | Loading in to trucks at the lifting point, unloading at destination, stacking properly in go downs or yard etc. as directed including carriage by head load up to a lead of 50.00 m at each of the two points. |
| 17 | R.C.C. pipes , C.I. pipes and unreinforced Cement pipes |
| 18 | 900 mm dia |
| 19 | Earth work from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. with in an initial lead of 30 metre and lift of 1.50metre including breaking clods and depositing the same in layers not exceeding 25cm. and rough dressing etc. complete as perprofile. |
| 20 | Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. |
| 21 | Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dryor moist / slushy silt / sticky soil. |
| 22 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge |
| 23 | In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means |
| 24 | upto 3 m depth |
| 25 | Without pumping out water and shoring |
| 26 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 27 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. |
| 28 | Pakur Variety |
| 29 | Using concrete mixer |
| 30 | Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawingn and technical specifications. |
| 31 | RCC Grade M25 |
| 32 | Using concrete mixer |
| 33 | Plain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications. |
| 34 | RCC Grade M25 |
| 35 | Height upto 5m |
| 36 | Using concrete mixer |
| 37 | Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. |
| 38 | Tor Steel rods / HYSD bars / TMT bars (JSW/ JSPL / Shyam / SRMB/ /SSL/ BMASL / Electrosteel |
| 39 | Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. |
| 40 | Tor Steel rods / HYSD bars / TMT bars (JSW/ JSPL / Shyam / SRMB/ /SSL/ BMASL / Electrosteel |
| 41 | Supplying,fitting and fixing of Mild Steel Guide Channel with necessary Mild Steel lugs of required length and size by making hole in to wall and fixing with necessary masonry work with maintaining proper line and levelas directed by the Engineer-in-charge. This item includes two coats of anti-corrossive bituminous paint over two coats of red lead primer. Payment will be made on actual length of Guide Channel. |
| 42 | Supplying /Replacing at site new pedestal or other similar items for sluices made with Mild Steel plates, angles, channels , holding down nuts & bolts etc. including fitting, fixing in position in concrete or masonry complete as per direction of the Engineer - in -charge. |
| 43 | Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per draw in gandinstruction given by the Engineer-in-charge) excluding cost of Mild Steel guide channel, sillbeam, gearing arrangement etc. but including painting with two coats of anti corrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. |
| 44 | Supplying, fitting & fixing in position rubber seal arrangements with musical note harmonic \"J\" type for making water tight in both up and down stream of draw shutter as wellas flap shutter including guide paths, additional M.S. flats, bolts and nuts for fixing the rubber seal in position including fabrication cost and carriage of all materials to site and complete as per direction of the Engineer-in-charge. |
| 45 | Musical Note, Harmonic Type |
| 46 | 127 mm x 6 mm |
| 47 | Supplying /Replacing Gear rod by a new Mild Steel Gear rod, threaded length as required and fitting,fixing in position with screw gearing arrangement for operating the draw shutter including taking out old gear rod by cutting bolts etc. complete as per direction of the Engineer-in-charge. (The old materials to be returned to Departmental Godown.) |
| 48 | 65 mm Dia |
| 49 | Supplying/Replacing at site alloy steel bush for gearing arrangement of Mild Steel regulator shutter including fitting & fixing the same in Cast Iron wheel with bearing and necessary lubricant including cutting internal thread in the bushas necessary including cost of all materials, tools, labours and carriage to site complete of specified diameter as per direction of the Engineer - in - charge. |
| 50 | 65 mm. dia |
| 51 | Supplying, fitting & fixing Cast Iron wheel (after taking out existin gone if necessary), rimmade of 28mm. to 36mm. dia to fit any size of gear rod including carriage to site, painting with two coats of bituminous paint over two coats of red lead primer etc .complete as per direction of the Engineer-in-charge. |
| 52 | 45 cm Dia CI Wheel |
| 53 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) |
| 54 | Supplying, spreading and consolidating Moorum to a depth of 75 mm at desired density and C.B.R. as per specification with power roller to proper gradient and camber including watering as necessary, and lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants etc. complete as per specification. |
| 55 | Water Bound Macadam Sub Base by consolidating Jhama metal / Laterite chelly or stone metal / shingles of specific size in hard crust to requisite thickness (measured after compaction) in layers including screening of metals etc. as necessary, hand packing, sweeping, watering and rolling in stages with power roller to proper line, grade and camber, lighting, guarding & barricading and making necessary earthen bundh of one metre width on each side where necessary to protect edges and preparing the bed by necessary cutting or filling and rolling all complete including the cost of all materials and hire and labour charges of all men and machineries and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision) |
| 56 | For Construction of Sub Base by consolidating Jhama metal( 63 mm to 45 mm) with moorum screening |
| 57 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. |
| 58 | Where stagging is not required. |
AI Tender Summary
Tender Timeline
Feb 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender