Rural Development and Panchayat Raj Department has published Supply Installation Testing Commissioning Of 1 Mva Distribution Transformer, Servo Stabilizer And Lt Panel Along With Allied Works For Providing Power Supply To Oxygen Concentrator Plant At Skims Soura. Submission Date for this Tender is 10-03-2022. Servo Stabilizer Tenders in soura Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying, installing, structural steel tubular pole conforming to IS-2713, 410SP-56with pole cap & base plate of 300 mm x 300 mm x 6 mm for erecting 11 KV two pole structure comprising of 11 Mtr. pole, includingwelding, cutting, revetting, bolting and painting the entire structures with red oxide primer and two coats of synthetic enamel paint and necessary foundations including excavation and earth work for the steel structure with RCC 1:2:4 with 6" above ground level with following accessories. Supplying, installing 11 KV 9 KA discharge current single pole lightning arrestor Station Type with insulated base and necessary hardware. - 3 Nos.The job includes providing and fixing of 25x5 mm GI earthing strips as per standard from Earth pit on the insulator upto LA as per REC specfications Supplying & installing 11 KV 3 phase, 200 Amp. Vertical type gang operated switch with hot dip galvanised channels post type, insulator, tinned copper contacts, arcing horns, GI pipe gang operating handle, limit switch etc.locking arrangements etc. complete in all respects. - 1 Set.Supplying & installing 11 KV, 3 phase 200 Amp dropout fuse unit with 60 Amp fuses. Hot dip galvanished channel, post type insulator, tinned copper contacts bakelite fuse, carriers etc. complete in all respects. - 1 Set. Continued Below.... |
| 2 | Supplying & installing of "ACSR 0.05"from 11KV Bus to DT.Fabrication supply erection of Cross arms of shape and size and made out of M.S. channels 75mmx40mm x 6mm with flats and fixed to poles with GI clamps, GI bolts, nuts and washers and all hardware, jumpers & thimbles etc. of required size. Providing and fixing of Anti Climbing devices on each pole made out of 2 mm barbed wire coiled alongwith pole. Danger Notice Boards with Skull & Bones in red colour made out of 14 SWG sheet in urdu & English with voltage indicated including idetification plate.Stay assemblyas per requirement |
| 3 | Contruction Of RCC bed for 2 no. 1000 KVA transformer 6" x 8" x 6" |
| 4 | a) Earth work excavation manually inculding disposal of earth as directed within SKIMS permises=8"x6"x1"-0" x 2 No. |
| 5 | b) P/L ofgraded stone soling 40mm -50mm including Cost & carraige of material complete, 8"x6"x0"-4"=15.84cft =0.448 cum x 2 No. |
| 6 | c) P/L of plain cement concrete 1:4:8 mixture incuding cost& carriage of material completeQty vide part (b) = 0.448 cm x 2 No. |
| 7 | d) P/L of R.C.C work1:2:4 mix including cost and carriage of material 8"x6"x6" = 240 cftx 2 No. |
| 8 | e) P/L of steel reinforcement (TMT) 12mm dia including cost of cutting, bending ,binding including cost binding wireQty vide item (d)= 6.79 cum @ 35 kg/cum x 2 No. |
| 9 | f) Shuttering by steel plates/ wooden planks including removal of same after use. |
| 10 | Supply ,Installation.Testing & Commisioning of 1000KVA,11/0.433KV50Hz,Outdoor type,Dyn-11 Distribution Transformer Energy Efficientcy Level 2nd with OLTC( OCTC+RTCC+AVR ) ,Tapping-+5% to -30% Taps on H.T. Side in steps of 2.5% each, oil immersed,CopperWound,ONAN Cooled, step down ,Distribution Transformer having C.R.G.O core ,Confirming to IS: 1180 Part-1:2018 with latest amendments dully tested,painted and Oil filled to IS: 335 of 1983 with Latest amendments.The transformer shall be complete with following fittings:- a) Manual/ Auto Control of OLTCb) Oil conservator with oil level indicator , minimum level marking and drain plugs. c) automatic on load circuit type tap changer with position indicator and locking arrangement. d) 100mm dial type /Stem type thermometer with metal gaurd.e) Lifting lugs and Bi-directional roller. f) Rating Diagram and terminal marking plate g) Explosion Vent and valves for filtration ,drainage and filling e.t.c with necessaryplugs ,including air release plug.h) Radiator assembly and silica gel breather. |
| 11 | Making of earthing point with 2 inch dia GI pipe , B class , caged in 6 inch GI pipe class B in CCM compound and 10 feet Deep, as earthing electrode . The pit is to be dug using borewell and covered with 10""X10"" inch manhole cover . |
| 12 | P/laying of earthingGI strip 25 x 5mm including nut and bolts and welding |
| 13 | Supply and fixing of 40mm diamedium class PVC conduit 2mm thick along with accessories likewith rowel plugs ,screws, sadlles, bends etc complete as required at site . (in surface manner) |
| 14 | Supply and Erection of ST poles of following size complete with Base Plate and top Cap Confirming to IS as mentioned below in cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. a) 11 Mtrs410 SP 56 |
| 15 | Providing and making steel pole collar with cement concrete (1cement : 3 coarse sand : 6 stone aggregate 20mm) of specifiedsize and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) |
| 16 | Supply erection of 75mm x 40mm x 6mmMS channel iron cross-Armsincluding drilling holes for insulator pins, clamps& nuts and bolts and painting as required at site. (To be fabricated as per drawing /requirement at site) |
| 17 | P/f of 0.1/0.1P.G clamp |
| 18 | Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts,washers etc. as required. |
| 19 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
| 20 | Supply and laying of 0.1 ACSR conductor |
| 21 | Supplying, installing, testing and commissioning of AMF Cum Load management panelmade of 2 mm thick CRCA sheet steel providing with suitable size angle iron and channels support with suitable size of base channel for floor mounting, dust& vermin proof duly phosphatized & powder coated, inclusive of suitable size 4 strip Aluminium busbar covered with heat shrinkable sleeves of suitable size and length. The panel shall be suitable for incoming Bus ducting and outgoing cables from top and bottom both sides, pdg. inter-earthing and inter-connection with PVC insulated copper conductor cable solid copper conductor of suitable sizes and lugs on both ends of each cable and making of electricalinter locking in incomings and bus coupler, and providing all meters with back up fuses & Selector switches, all necessaryrelays , contactor , , control MCB and wiringetc. i/c pdg. & fixing below noted accessories.INCOMING : DG-3 SECTION-3 1000 Amp 415 V FP ACB (EDO Draw- out Type) having breaking capacity - 50 KA, with short circuit, earth fault , & over-current relay with Rotary Handle operating Mechanism - 1 No. (Incoming from DG set )(0-1000 A) Digital Ammeter with selector switch & 1000/5 C.T."s - 1 Set(0 - 500) Volt Voltmeter Digital type with selector switch -1 SetsRYB Indication lamps with MCB - 1 Set of three Continued Below... |
| 22 | BUS COUPLERS - 31600 Amp 415 V FP ACB (EDO Draw- out Type) having breaking capacity - 50 KA, with short circuit,under Voltage , earth fault & over-current relay with Rotary Handle operating Mechanism - 1 No. ElectricalInterlocking - Electrical Interlocking through ContactorsSECTION- 4INCOMING :1600 Amp 415 V FP ACB (EDO Draw- out Type) having breaking capacity - 50 KA, with short circuit,under Voltage ,earth fault & over-current relay with Rotary Handle operating Mechanism - 1 No. (Incoming from Transformer-4)(0-1600 A) Digital Ammeter with selector switch & 1600/5 C.T."s - 1 Set (0 - 500) Volt Voltmeter Digital type with selector switch -1 Sets RYB Indication lamps with MCB - 1 Set of three 1000 Amp 415 V FP ACB (EDO Draw- out Type) having breaking capacity - 50 KA, with short circuit, earth fault & over-current relay with Rotary Handle operating Mechanism - 1 No. (Incoming from DG Set)(0-1000 A) Digital Ammeter with selector switch & 1000/5 C.T."s - 1 Set(0 - 500) Volt Voltmeter Digital type with selector switch -1 SetsRYB Indication lamps with MCB - 1 Set of three Continued Below... |
| 23 | BUS COUPLERS -4 1600 Amp 415 V FP ACB (EDO Draw- out Type) having breaking capacity - 65 KA, with short circuit,under Voltage ,earth fault & over-current relay with Rotary Handle operating Mechanism - 1 No.ElectricalInterlocking - Electrical Interlocking through Contactors .SECTION-5INCOMING :1600 Amp 415 V FP ACB (EDO Draw- out Type) having breaking capacity - 65 KA, with short circuit, earth fault & over-current relay with Rotary Handle operating Mechanism - 1 No. (Incoming from Transformer-5) (0-1600 A) Digital Ammeter with selector switch & 1600/5 C.T."s - 1 Set (0 - 500) Volt Voltmeter Digital type with selector switch -1 Sets RYB Indication lamps with MCB - 1 Set of three 1000 Amp 415 V FP ACB (EDO Draw- out Type) having breaking capacity - 65 KA, with short circuit,under Voltage ,earth fault & over-current relay with Rotary Handle operating Mechanism - 1 No. (Incoming from DG Set )(0-1000 A) Digital Ammeter with selector switch & 1000/5 C.T."s - 1 Set(0 - 500) Volt Voltmeter Digital type with selector switch -1 SetsRYB Indication lamps with MCB - 1 Set of three OUTGOING:SECTION-31000 Amp 415 V 4P ACB MDO TYPE having breaking capacity - 50 KA, with Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 1 Nos.630 Amp 415 V 4P MCCB having breaking capacity - 50 KA, with Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 2 Nos.400 Amp 415 V 4P MCCB having breaking capacity - 36 KA, with Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 2 Nos. . Continued Below... |
| 24 | OUTGOING:SECTION-4 630 Amp 415 V 4P MCCB having breaking capacity - 50 KA, with Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 2 Nos.400 Amp 415 V 4P MCCB having breaking capacity - 36 KA, with Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 2 Nos. OUTGOING:SECTION-5 630 Amp 415 V 4P MCCB having breaking capacity - 50 KA, with Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 2 Nos.400 Amp 415 V 4P MCCB having breaking capacity - 36 KA, with Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 2 Nos. Note1:- The said is to be Coupled/ Connected/Cascaded with the Existing panel having 3 Transformer & 2 DG Set Incommers along with 2 Bus Coupler and 2 Outgoing Section . The SLD along with General Arrangement is given in the SBD of Tender Document. Note2:- The AMF Cum Load Management is to be provided for the existing panel as wellas for the aforementioned Panel .i.e The AMFand Load Management shouldmanage /control allincommers/outgoings of aforementioned and Existing panel. |
| 25 | Providing and making of end termination of 100mm Sq. single core Al. Cable, including thimblng crimping color coded Heat Shrinkable Sleeve and connecting as per site requirement |
| 26 | Providing and fixing of brass compression Cable Glands of 1000 mm sq. single core Aluminium Cable . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
