Installation Work Installation Of Open Air Gym In Public Park Nokha. BSR ITEMEarth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pi, nokha-Rajasthan

Installation Work Installation Of Open Air Gym In Public Park Nokha. BSR ITEMEarth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) 3 PART (B) :- NON BSR ITEMProviding and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from GI, pipe minimum of 80NB Cclass welded with M.S. round base plate micas, 250 mm & IOmm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/berger/ Nerolne sith minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions ofEngineer-in-charge to fulfill the functional requirement. Thc indicative Design/Photo is as per enclosed Photo no.01 (The cement concrete and excavation work shall he paid separately) 4 Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Width) 1750mm (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 250 mm & 10mm thick. The Handle Frame shall be made up of atleast 25NB C Class G.I. Pipe. The footrests shall be made from Aluminum casting material of size not less than 130mm x 310mm x 5mm thickness and mounted on M S. Plate of Size 130mm x310rnm x 3mm thick. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/Berger/ Nerolac Paints with 60 to70 Micron thickness, complete in all respect includig fixing the M. S holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfill. 5 Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (width) x 1280mm ( Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from GI pipe minimum of 80NBC class welded with M S round base plate atleast 250mm & 10mm thick High tensile S.S. nut bolts shall be used for assembly The power coting shall be done with pure Polyester powders from Ackzonoble/berger/Nerolacpaints. with 60 to 70 micron thickness, complete in all respect including fixing the MS. holdfast in cement concrric to hold the whole structure, under thedirection of engineer-in-charge to fullfil the functional requirement. The indicative Design/photo is as per enclosed photo no. 3( The cement concrete and excavation work shall be paid separately) 6 P&F of seated puller of size not less than 1900mm (Length) x 740mm (Width) x1920mm. (Height). to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate atleast 250 min & 10mm thick. The handle frame shall be minimum of 32NB C class G.I. pipe. The seat frame minimum of 32NB C class G.I. pipe, Closing. Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts. shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. under the directions o Engineer-in-charge to fullfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The .cement concrete and excavation work shall be paid separately). 7 Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm, (Height), to buildup the muscles of thigh and enhance the strength of waist. The main structure frame shall he made from G.I. pipe minimum-of 80NB C class welded with M.S. round.base plate ateast 250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of MS.. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material high tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolne with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately) 8 Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from al. pipe minimum of 80NB C class welded with M.S, round base plate atleast 250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall he made from C class G.I. pipe. The powder coating shall be done with Pure Polyester. powder Ackzonoble/ Berger/ Nerolac Paints with-60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. under the directions of Engineer-in-charge to fulltil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately). 9 Providing and fixing of Chest Press of size not less than 2000mm (Length)710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function, The main structure frame shall be made from G.I. pipe minimuin of 80NB C class welded with M.S. round base plate. atleast 250 mm & 10mm thick. The handle frame shall be made up from atleast 32NB C class G.I. pipe. The -seats and back- rests to be fitted on the outer frames shall be made up of M,S. Sheet of size not less than 330mm X 300 mmX 2mm thickness. Closing Caps shall he made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester .powders from Ackzonoble/Berger/ Nerolac, Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions or engineer-in-charge tofullfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately) 10 Providing and fixing of Pommel Horse of size not less than 2150mm (Length) 800mm (Width) x 800mm. (height) to enhance the flexibility of lower limbs, waist and abdomen The main structure frame shall he made from G.I. pipe minimum of 80NB C class welded- with M.S. round base plate atleast 250 mm 10mm thick. The handle frame be minimum of 12NB shall be made from C Class G.I. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately). 11 Providing and fixing of Double Twister Standing of size not less than 1500rnm (Length) x 600mm (Width) x1300mm.(height), to enhance flexibility, of waist. The main structure frame shall he made from G.I. pipe minimum of80NB C class welded with M.S. round base plate Atleast 250mm & 10mm thick. The handle frame is minimum of 25NB shall be made from C class G.I. pipe. The Twister plate to he fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately). 12 Providing and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist,suitablefor people of diffrent ages except children. The main structure frame shall be made from G.I. pipe minimuin of 80NB C class welded with M.S. round base plate. atleast 250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 NB and 25 NB shall be made from C class G.I. pipe, The handle frame of Seating & standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from C` class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and 10mm thickness.Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 10. (The cement concrete and excavation work shall be paid separately). 13 Providing and fixing of Chest Press Cum Seated Puller of Size not less than 2000mm ( Length) x 710mm (Width) x 2200mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder,The main structure frame shall be made from G.I. pipe minimuin of 80NB C class welded with M.S. round base plate. atleast 250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S, Sheet of size 330 mm X 300 mm.X 2 mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately). 14 Providing and fixing of Push up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body The main structure frame shall be made from G.I. pipe minimuin of 80NB C class welded with M.S. round base plate. atleast 250 mm & 10mm thick The handle frame minimum of 25 NB shall be made from C Class G.I. pipe Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately). 15 Supply and fixing of Instruction board of size 4x 6 made of digital vinyl print with gloss lamination & pasted on 3mm ACP sheet fixed over 2.0 mm thick MS sheet, framed on 32 mm dia MS pipe, supported on 50mm dia MS pipe which goes 600mm below ground level with hot fast including welding and painting. Design and drawing as per photograph no. 13, all complete under direction, of Engineer-in-charge. (The cement concrete and excavation work shall be paid separately)

INR 500 /-

INR 17160.0 /-

INR 8.58 Lakhs /-

Name of Work : INSTALLATION OF OPEN AIR GYM IN PUBLIC PARK NOKHA

Sl. No.	Item Description
1	PART (A) :- BSR ITEM Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m
2	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
3	PART (B) :- NON BSR ITEM Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from GI, pipe minimum of 80NB "C"class welded with M.S. round base plate micas, 250 mm & IOmm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/berger/ Nerolne sith minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions ofEngineer-in-charge to fulfill the functional requirement. Thc indicative Design/Photo is as per enclosed Photo no.01 (The cement concrete and excavation work shall he paid separately)
4	Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Width) 1750mm (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 250 mm & 10mm thick. The Handle Frame shall be made up of atleast 25NB "C" Class G.I. Pipe. The footrests shall be made from Aluminum casting material of size not less than 130mm x 310mm x 5mm thickness and mounted on M S. Plate of Size 130mm x310rnm x 3mm thick. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/Berger/ Nerolac Paints with 60 to70 Micron thickness, complete in all respect includig fixing the M. S holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fullfill.
5	Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (width) x 1280mm ( Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from GI pipe minimum of 80NB"C" class welded with M S round base plate atleast 250mm & 10mm thick High tensile S.S. nut bolts shall be used for assembly The power coting shall be done with pure Polyester powders from Ackzonoble/berger/Nerolacpaints. with 60 to 70 micron thickness, complete in all respect including fixing the MS. holdfast in cement concrric to hold the whole structure, under thedirection of engineer-in-charge to fullfil the functional requirement. The indicative Design/photo is as per enclosed photo no. 3( The cement concrete and excavation work shall be paid separately)
6	P&F of seated puller of size not less than 1900mm (Length) x 740mm (Width) x1920mm. (Height). to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 250 min & 10mm thick. The handle frame shall be minimum of 32NB "C" class G.I. pipe. The seat frame minimum of 32NB "C" class G.I. pipe, Closing. Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts. shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. under the directions o Engineer-in-charge to fullfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The .cement concrete and excavation work shall be paid separately).
7	Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm, (Height), to buildup the muscles of thigh and enhance the strength of waist. The main structure frame shall he made from G.I. pipe minimum-of 80NB "C" class welded with M.S. round.base plate ateast 250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of MS.. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material high tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolne with 60 to 70 micron thickness complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately)
8	Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from al. pipe minimum of 80NB "C" class welded with M.S, round base plate atleast 250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall he made from "C" class G.I. pipe. The powder coating shall be done with Pure Polyester. powder Ackzonoble/ Berger/ Nerolac Paints with-60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure. under the directions of Engineer-in-charge to fulltil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately).
9	Providing and fixing of Chest Press of size not less than 2000mm (Length)710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function, The main structure frame shall be made from G.I. pipe minimuin of 80NB "C" class welded with M.S. round base plate. atleast 250 mm & 10mm thick. The handle frame shall be made up from atleast 32NB "C" class G.I. pipe. The -seats and back- rests to be fitted on the outer frames shall be made up of M,S. Sheet of size not less than 330mm X 300 mmX 2mm thickness. Closing Caps shall he made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester .powders from Ackzonoble/Berger/ Nerolac, Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions or engineer-in-charge tofullfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately)
10	Providing and fixing of Pommel Horse of size not less than 2150mm (Length) 800mm (Width) x 800mm. (height) to enhance the flexibility of lower limbs, waist and abdomen The main structure frame shall he made from G.I. pipe minimum of 80NB "C" class welded- with M.S. round base plate atleast 250 mm 10mm thick. The handle frame be minimum of 12NB shall be made from "C" Class G.I. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately).
11	Providing and fixing of Double Twister Standing of size not less than 1500rnm (Length) x 600mm (Width) x1300mm.(height), to enhance flexibility, of waist. The main structure frame shall he made from G.I. pipe minimum of80NB "C" class welded with M.S. round base plate Atleast 250mm & 10mm thick. The handle frame is minimum of 25NB shall be made from "C" class G.I. pipe. The Twister plate to he fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately).
12	Providing and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist,suitablefor people of diffrent ages except children. The main structure frame shall be made from G.I. pipe minimuin of 80NB "C" class welded with M.S. round base plate. atleast 250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 NB and 25 NB "shall be made from "C" class G.I. pipe, The handle frame of Seating & standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from "C` class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and 10mm thickness.Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 10. (The cement concrete and excavation work shall be paid separately).
13	Providing and fixing of Chest Press Cum Seated Puller of Size not less than 2000mm ( Length) x 710mm (Width) x 2200mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder,The main structure frame shall be made from G.I. pipe minimuin of 80NB "C" class welded with M.S. round base plate. atleast 250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S, Sheet of size 330 mm X 300 mm.X 2 mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately).
14	Providing and fixing of Push up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body The main structure frame shall be made from G.I. pipe minimuin of 80NB "C" class welded with M.S. round base plate. atleast 250 mm & 10mm thick The handle frame minimum of 25 NB shall be made from "C" Class G.I. pipe Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts Shall be used for assembly The powder coating shall be done with Pure Polyester powder Ackzonoble/Berger/ Nerolac Paints with 60 to70 micron thickness. complete in all respect including fixing the M:S. holdfast in cement concrete to hold the Whole structure,under the direction of engineer-in-charge to fullfill the functional requierment The indicative Dcsign/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately).
15	Supply and fixing of Instruction board of size 4"x 6" made of digital vinyl print with gloss lamination & pasted on 3mm ACP sheet fixed over 2.0 mm thick MS sheet, framed on 32 mm dia MS pipe, supported on 50mm dia MS pipe which goes 600mm below ground level with hot fast including welding and painting. Design and drawing as per photograph no. 13, all complete under direction, of Engineer-in-charge. (The cement concrete and excavation work shall be paid separately)