|
| 1 | Dismantling cement asbestos, plywood or other hard board ceiling or partition walls including stacking of seviceablematerials and disposal of unserviceable materials withinthe lead as directed by the in-charge engineer. |
| 2 | Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places 12mm thick |
| 3 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.Two or more coats on new work over an under coat ofsuitable shade, ordinary paint of approved brand and manufacture including applying of putty and preparation of surface as directed by EIC |
| 4 | Providing of 75mm Cornice of budloo woodof Approved design and shape including cost of nails scafollding complete in finish form. |
| 5 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position imported wood |
| 6 | Engagement of Carpenters for repair of old wood work |
| 7 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within lead as directed by the in-charge engineer. |
| 8 | Providing and fixing polycarbonate sheeting upto any pitch including fixing with self drilling screws/ polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers as per directions of EIC complete butexcluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 1.5 mm thick corrugated |
| 9 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.24.1 Ridges plain (300-450mm) |
| 10 | Providing and laying in position cement concrete of specified grade including curing but including the cost of centring and shuttering. All work upto all levels 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 11 | Half brick masonry with bricks of class designation 75 in superstructure up to all floor levels. In cement mortar 1cement: 4 fine sand mortar |
| 12 | 12mm plaster on fair side of brick work in 1;6 mix incl. cost of scaffolding complete. |
| 13 | Providing and laying vitrified floor tiles in Size of Tile non polished mat finished 600x600 mm WITH 3mm SPACERS(thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting thejoints with white cement and matching pigments etc |
| 14 | Providing and fixing of structural steel of required pattern angles / tees /flats / round and square bars/Hollow sections duly welded in frames with approved design and drawing given by EIC, welded complete including applying a priming coat of red oxide and two coats of synthetic enamel paint complete. |
