Anganwadi Construction 83 In Ward 1 Anganwadi Costruction 83 In Ward 1
Tender Value
6.47 Lakhs
Estimated cost
Bid Submission
04 Mar 2022
0 days left
EMD
16200
Bank guarantee accepted
Document Fee
1534
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sooranad → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Anganwadi Construction 83 In Ward 1 Anganwadi Costruction 83 In Ward 1
BOQ
| Sl. No. | Item Description |
| 1 | MGNREGS ANGANWADI CONSTRUCTION |
| 2 | Stone Aggregate(single size): 40 mm nominal size |
| 3 | Stone Aggregate(single size):20 mm nominal size |
| 4 | Coarse sand (zone III) |
| 5 | Portland Cement |
| 6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 7 | Vibrator (Needle type 40 mm) |
| 8 | Sundries |
| 9 | Stone for masonry work |
| 10 | Stone Aggregate(single size): 10 mm nominal size |
| 11 | Wall form panel 1250x450xmm |
| 12 | Corner angle 45x45x5 mm 2.50 long |
| 13 | Column clamp 450x1070 mm |
| 14 | Prop 2 m (2-3.5m) |
| 15 | wall form panel 1250x500 mm |
| 16 | Corner angle 45x45x5 mm 1.50 m long |
| 17 | 100 mm channel shoulder 2.5 m long |
| 18 | Double clip (bridge clip) |
| 19 | Single clip |
| 20 | M.S. Tube 40 mm dia |
| 21 | Solid blocks of size 30x20x20cm |
| 22 | Solid blocks of size 30x20x15cm |
| 23 | Structural steel such as tees, angles, channels and R.S. joists |
| 24 | Red oxide Zinc chromate primer |
| 25 | Adjustable span ESO+SI (2.35-3.40) |
| 26 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 27 | Beam clamp 300-380 mm (450-1070 mm) |
| 28 | Twisted steel/deformed bars |
| 29 | Mild Steel round bar above 12 mm dia |
| 30 | Flats up to 10 mm in thickness |
| 31 | Anjili wood scantls |
| 32 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 33 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 34 | Bright finished or black enameled mild steel screws 40 mm |
| 35 | Bright finished or black enameled mild steel screws 20 mm |
| 36 | Anjili wood planks |
| 37 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 38 | Iron hooks & eyes 100 mm |
| 39 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 40 | Chromium plated Brass screws 25 mm |
| 41 | Solid blocks of size 40x20x10cm |
| 42 | Fine sand (zone IV) |
| 43 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 44 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 45 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 46 | Plastic emulsion paint |
| 47 | Pink primer (for wood) |
| 48 | Synthetic enamel paint in black or chocolate shade |
| 49 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 50 | Vitreous China orrisa type w.c. pan size 580 mm |
| 51 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 52 | 100 mm S.C.I. trap with vent heel |
| 53 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 54 | C.I. bracket for wash basin and sinks |
| 55 | PVC pipe 50 mm outer dia.6kgf/cm2 |
| 56 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
| 57 | PVC pipe 25 mm outer dia. 10kgf cm2 |
| 58 | PVC pipe 20 mm outer dia 10 kfg/cm2 |
| 59 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 60 | Black Japan |
| 61 | PVC vent cowl 63 mm dia |
| 62 | PVC door Tee 110x110x75 mm dia |
| 63 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 64 | C.I. bracket for wash basin and sinks pair |
| 65 | Stainless steel kitchen sink - without drain board |
| 66 | PVC pipe 20 mm outer dia 10 kfg/cm2 |
| 67 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
| 68 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
| 69 | PVC pipe 110 mm outer dia. 4kgf/cm2 metre |
| 70 | MR80 PVC bend 110 mm dia |
| 71 | PVC Socket/coupling 110 mm dia |
| 72 | PVC bend 63 mm dia |
| 73 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 74 | Vitreous china pedestal type wate closet each 981.00 1.0000 981.00 |
| 75 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, |
| 76 | polyethleen water storage tank with cover and suitable locking arrangements |
AI Tender Summary
Tender Timeline
Feb 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender