Under Jal Jeevan Mission Bhendala Tanda Water Supply Scheme Tq.Ghansawangi Dt.Jalna
Tender Value
14.25 Lakhs
Estimated cost
Bid Submission
02 Mar 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhendala → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Under Jal Jeevan Mission Bhendala Tanda Water Supply Scheme Tq.Ghansawangi Dt.Jalna
BOQ
| Sl. No. | Item Description |
| 1 | PUMPINGMACHINERY Item No.1 Providing erecting and giving test of submersible pump sets conforming to ISI 9283 Pump shall be suitable for various dove very head and discharge with stainless steel pump shaft and Brose motor suitable for working on 415 V+10% 3 Ph 50 Hz A.C.supply cable guard thrust carbon / fiber bearing to accept entire hydraulic thrust waterproof direct coupling pump shall have suitable outlet as per manufactures design Antirust stream Lined non return valve shall be provided with the pump suitable suction strainer shall be also e provided with the pump suitable suction strainer shall be also be provided 3 core single / double run copper conduct for submersible type flat cable 3 m and 2 pair of erection clips shall be provided along with the pump Rates per pump upto 8 stages are as below. submersible pump set 150 mm dia up to 8 stages 5.00 HP pumps.5.00 BHP with 8 stages (From well to ESR) |
| 2 | Item No. 2 providing and erecting CIDF sluice valve with ringing to pipe work incl. All hardware and packing water works quality having non rising spindle with hand wheel and without by pall arrangement spindle of stainless steel as per requirement excluding c.c. foundation structural steel support confirming to is ISI 65 mm dia |
| 3 | Item No.3 supplying and erecting G.I Pipe B class for suction delivers for suction delivers for centrifugal pump incl. Plumbing with socket and necessary material 65 m dia GI Pipe |
| 4 | Item No.4 supplying and erecting flat flexiblesubmersible typecable with copper coductor PVC insulated and PVC sheathed.3 core 2.50 sqmm |
| 5 | Item No.4a supplying and erecting a complete box typepanel board with hinged doors and looking arrangement for star delta starter to operator squirrel cage induction motor on 40 v, 3 HP, 50 Hz with no volt coil and over Load element etc.) G.I. sheet of thickness given below to be used for fabrication of boxes,etc.including cutting,bending,welding and painting with one coat of red lead paint and two coats of enamel paint.G.I.sheet 16 SWG. 1 x 1.00 m x 1.00 m= 1.00 Sqm |
| 6 | Item No.4b Supplying and errecting metal work in CRCA sheet withfabricationoxes of panel board or for other purpose etc complete. Includingcutting, bending,welding and painting with one coat of red lead paintandtwo coats of enamel paint to match the switch gear or as per direction |
| 7 | Item No. 4c Supplying and errecting H.C. pattern porcelain fuse bridge with link suitable for 240 volts of approved make errected on pilished T.W. block. Incomming 100 A Kitkat base |
| 8 | Item No.4d Supplying and errecting double pole iron clad switch with fuseand netrual link approved make erected on angle iron frame. |
| 9 | ItemNo.4eSuppling and errecting on angle frame triple pole iron clad switch and fuse 415/500 V of suitable rating as below of approved make in position with necessary nut bolts,washer withrubber packing.Metal clad T.P.63 AMP |
| 10 | ItemNo.4f Suppling and errecting on angle frame four pole iron clad switch and fuse 500 V of suitable rating as below of approved make. |
| 11 | ItemNo.4g Supplying and errecting TW varnished plank of 18/19 mm thick marine plywood fixed to wait or on provided panel board for kitkat fuses and meter etc.with necessary material. |
| 12 | ItemNo.4h Supplying and errecting set of three pilot lamps all backlite with colour glasses with miniature lamps 230/250 volts errected on provided M.S. box with panel type fuses and connected with PVC copper wire. |
| 13 | ItemNo.4iProviding and errecting voltmeter AC 50 Hz 0 to 550 volts of suitable range flush type complete errected in provided M.S. box and connected to supply by PVC copper wire.Voltmeter 96 x 96 mm |
| 14 | ItemNo.4jProviding and errecting Ammeter AC 50 Hz 440 volts of suitable range flush type complete errected in provided M.S. box and connected to supply by PVC copper wire. |
| 15 | ItemNo.4k Providing and errecting selector with RT-YB-BR for volt meter r-y-b- for ammeter suitable for A.C. sypply 500 volts 50 Hz errected in provided MS box and connected to voltmeter,ammeter with PVC copper wire.For Ammeter and Voltmeter |
| 16 | ItemNo.4lProviding and errecting bank of all polypropylene condensers with the standard capacities of 1,2,3,4,5,7,12,5,15,20 and 25 KVAr units of power factor correction for operation on 3 phase,50 Hz 400 V+/-10% with externally disharging resistants,earthing,terminals and built up angle iron or channel iron frame work and provided with terminal cover box complete errected and tested.3 KVAr |
| 17 | ItemNo.4mProviding and errecting fully automatic DOL Starter to operate squirrel cage induction motor working on 380-440 Volts,3 Phase,50 Gz with no volt coil over load element and ON-OFF push buttons with necessary material and connected to supply etc.complete.Starter with original sheet steel encloser |
| 18 | Item No.5 supplying and erecting flat flexiblesubmersible typecable with copper coductor PVC insulated and PVC sheathed. Labour Charges for internal wiring of Panel including all material . |
| 19 | ItemNo.6 Providing,erecting,commissioning and giving testing pressure gauge of 0 to 20 kg /cum with syphon tube isolating cock for 12mm dia G.I.pipe pressure gauge 100mm dia |
| 20 | Item No.7 supplying and erecting galvanized cast iron earth plate 60x 60 x 0.6 cm buried in specifically prepares earth pit 1.5 m below ground level with 30 kg char coal and salt in alternative necessary length of double GI earth wire 8 SWG connected to plate with cadmium plate GI nut volts 12 mm dia with bit minus compound and through 12 mm dia GI pipe. |
| 21 | Item No.8 Giving Test and Trial of Pumping Machinery |
| 22 | Item No.9:- Providing and supllying ISI Std.CI flanged/ S&S specialsicluding all taxes(central&local) Railway fright, insurance unloadingfrom railway vagon loading to the trucks transport to departmentalstore/ site unloading , stacking etc.coplete |
| 23 | PURE WATER RISING MAIN Item No.1 Excavation for foundation/pipe trenches in earth, soils of all types, sand gravel and soft murum,íncluding removing the excavated material upto distance of 50 meter and lift as below, stacking and spreading as directed, manual dewatering , preparing the bed for foundation and excluding backfilling etc. complete. |
| 24 | Item No.2 Excavation for foundation / pipe trenches in hard murumincluding removing the excavated material upto a distance of 50 pM beyond the area and lifts as below, stacking and spreading as directed by Engineer, in charges, normal dewatering preparing the bed for foundation and excluding back filling etc complete |
| 25 | Item No.3 Excavation for foundation / pipe trenchesin soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lift as below, stacking as directed by Engineer in charges normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 26 | Item No.4:- Excavation for foundation / pipe trenchesin hard rock by controlled blasting including trimming and levelling the bed by chisselling where necessary and removingthe excavated material upto a distance of 50 M beyond the area and lift as below, stacking as directed by Engineer in charges normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 27 | Item No.5:- Providing and supplying in standard lengths ISI marks rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification No 4985/1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores/ site and sacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e.slovent cement, etc complete (selfish type to be jointed with cement solvent) Working pressure 6 Kg./sq. Cm.Well to Prop. E S R 90mm dia PVC pipe 6 kg/cm2. |
| 28 | Item No.6:- Lowering laying and jointing with PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of work including cost of all labor, material, except cement solvent, rubber ring giving satisfactory hydraulic testing as per IS code etc complete (with cement solvent joint/ring fit joint)working pressure 6 and 10 kg /s sq cm.90mm dia PVC pipe 6 kg/cm2 |
| 29 | Item No.7:- Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.90 mm dia PVC pipe 6 kg/cm2. |
| 30 | Item No.8:-:- Providing and supplying air valves as per IS 10845 and MJPs standard specifications of approved make and quality of following diameter incl7ding all taxes (Central and local) railway freight inspection charges, unloading from railway wagons, lading into truck transpiration upto departmental stores / site, unloading and stacking etc complete Air Valve single Ball flanged screwed type PN 1.6Well to ESR-25 mm dia single ball flanged type PN.1.0 |
| 31 | Item No.9:- Providing and fixing in position air valve shaft including providing and fixing GI medium class or 6 mm thick MS pipe shaft 2.70 m long over branch flange of air value tee, providing PCC block of M 150 concrete 150 as shown in type design together with providing and making flanged joints wherever required and fixing of air value over the shaft excluding cost of air value over the shaft excluding cost of air value and branch flanged air value tee etc complete as per type design and as directed by Engineer in charge for following diameters of pie lines (type design attached) |
| 32 | Item No. 10:-Filling in plinth /the trenches withmurum for bedding with 15 cm to 20 cmincluding consolidation, surcharging, etc complete. |
| 33 | Item No. 11:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc complete. |
| 34 | DISTRIBUTION SYSTEMItem No.1:- Excavation for foundation/pipe trenches in earth. soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance ofmeters and lift as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling etc. complete. |
| 35 | Item No.2:- Excavation for foundation / pipe trenches in hard murumincluding removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stackingand spreading as directed by engineer, in charges, normal dewatering preparing the bed for foundation and excludi9ng backfilling etc complete. |
| 36 | Item No.3:-Excavation for foundation / pipe trenchesin soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lift as below, stacking as directed by Engineer in charges normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 37 | Item No.4 :-Excavation for foundation/pipe trenches in hard rock and concrete road by chiseling, wedging, line drilling, by mechanical means or by any other means other than blasting including trimming and leveling the bed, removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking as directed by Engineer in charge, normal dewatering, excluding backfilling etc complete. |
| 38 | Item No.5:-Providing and supplying in standard lengths ISI marks rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no 4985/1988 including all local and central taxes, transportation, freight charge, inspection charges, loading, unloading, conveyance to the departmental stores/site and sacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc complete (type to be jointed with cement solvent) working pressure4 kg/ cm2.75 mm dia pvc pipe 4 kg/ cm2- |
| 39 | 90 mm dia pvc pipe 4 kg/ cm2- |
| 40 | Item No.6:-Providing and supplying PVC special of required size including loading unloading to the departmental store/side etc. complete. |
| 41 | Item No.7:- Lowering laying and jointing with PVC pipes and specials of following class nd diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring giving satisfactory hydraulic testing as per IS code etc complete (with cement solvent joint/ring fit joint) working pressure 4 kg/ cm2.75mm dia pvc pipe 4 kg/ cm2- |
| 42 | 90 mm dia pvc pipe 4 kg/ cm2- |
| 43 | Item No.8:-Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.75 mm dia pvc pipe 4 kg/ cm2- |
| 44 | 90 mm dia pvc pipe 4 kg/ cm2- |
| 45 | Item No.9:- Providing erecting connecting double flanged short body pattern type manually operated Butterfly Value having body, disc and end cover in graded cast iron to IS 210CF 200 generally conforming in BS 5155, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft to stainless steel riding in Teflon bearings excluding C.C. foundation/structural steel support confirming to IS 13095 - 199180mm sluice valves without byepass arrangement PN.1 |
| 46 | Item No.10:- Lowering laying and jointing in position following C.I. D/F Reflux values, butterfly values and sluice values including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc complete. (Rate for all class of Values)80 mm sluice valves |
| 47 | Item No. 11:-Providing constructing BB masonry value chamber with 15 cm thick 1:3:6 proportion on pcc bedding excluding excavation BB masonry incm 1:5 proportion precast RCC frame cover etc. complete 23 wall thick. Size 0.60 x 0.45x0.90 m deep |
| 48 | Item No.12:- Providing and laying in situ 1:2:4 (M-150)grade of C.C. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering.Form work compacting and curing. Finishing etc.complete with initial lift of 1.5 M below/above ground level. |
| 49 | Item No.13:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 125 cm layers with all leads and lifts including consolidation, surcharging, etc complete. |
| 50 | Item No.1:- Provision for GST Charges |
AI Tender Summary
Tender Timeline
Feb 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 02, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender