Maintenance Of Road From H/O Abed Ali To H/O Parimal Debnath Under Chandranagar Gp, Bishalgarh, Sepahijala, Tripura During The Year 2022-23 Sh- Wbm-3, Re-Carpeting, Seal Coat Etc. (L-0.90 Km) (2Nd Call)
Tender Value
24.14 Lakhs
Estimated cost
Bid Submission
16 Mar 2022
0 days left
EMD
24144
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bishalgarh → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Road From H/O Abed Ali To H/O Parimal Debnath Under Chandranagar Gp, Bishalgarh, Sepahijala, Tripura During The Year 2022-23 Sh- Wbm-3, Re-Carpeting, Seal Coat Etc. (L-0.90 Km) (2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | Construction of road side pucca drain with M10 (1:3:6 with jhama brick aggregate)to specified lines, grades, levels and dimensions as per approved design and MoRD Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site. (including centering, shuttering, etc. but excluding reinforcement) Trapezoidal drain (top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mm)In Ordinary Soil |
| 2 | Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 3 | Brick edging laid length wiseProviding and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 4 | WBM Grading - 3Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading - 3 as per MoRD Technical Specification Clause 405(i) By Manual Means |
| 5 | Providing and laying tack coat using hot straight run bitumen of grade VG- 30, including heating the bitumen, spraying the bitumen, cleaning and spreading the existing road surface as per specifications: On W.B.M @ 0.75 kg/ Sqm. |
| 6 | Providing and laying tack coat using hot straight run bitumen of grade VG- 30, including heating the bitumen, spraying the bitumen, cleaning and spreading the existing road surface as per specifications: On bitumen surface @ 0.50 kg/ Sqm. |
| 7 | 20 mm thick Open - Graded Premix Carpet using Bituminous (Viscosity grade / modified bitumen) BinderProviding , laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508.Case - I : By Manual Meansi) Bitumen of VG-30 |
| 8 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510A) By Manual meansCase - IV : Type D (premix with fine sand)(I) Bitumen of VG 30 |
| 9 | Patch repairing/Maintenance of bituminous surface road using jhama brick aggregate & Viscosity Graded bitumen (VG-30)Repairing pot holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling with jhama chips using bitumen of VG-30 @ 54 kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/ sqm of prepared road surface as per direction of the Engg-in-charge and all as per MoRD technical specification Clause 1900, 502, 503 and 504. |
| 10 | Laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding cost of pipes (available at site), excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per MoRD Technical specification Clause 1106. 900 mm Dia |
AI Tender Summary
Tender Timeline
Feb 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender