Construction Of Office For Veterinary Assistant Surgeon At Durbuk Construction Of Office For Veterinary Assistant Surgeon At Durbuk
Tender Value
42.89 Lakhs
Estimated cost
Bid Submission
05 Mar 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh Ladakh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office For Veterinary Assistant Surgeon At Durbuk Construction Of Office For Veterinary Assistant Surgeon At Durbuk
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 1 Osqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr.All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3 fine sand : 6 gradedstone aggregate 40mm nominal size)Crushed |
| 3 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) |
| 5 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. |
| 6 | Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete. |
| 7 | Centring and shuttermg including strutting, propping etc. and removal of form for· Columns, Pillars, Piers, Abutments, Postsand Struts |
| 8 | Centring and shuttermg including strutting, propping etc.and removal of form for· Lintels, beams, plinth beams, girders,bressumers and centilevers. |
| 9 | Centring and shuttermg including strutting, propping etc. and removal of form for·Suspended floors, roofs, landings, balconies and access platform. |
| 10 | Centring and shuttermg including strutting, propping etc. and removal of form for·tairs, (excluding landings) except spiralstaircases. |
| 11 | Random Rubble masonry with hard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) |
| 12 | Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size. |
| 13 | Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. and length (hold fast lugs or with dash fasteners shall be paid for separately): 1st class Kail wood |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.First class kail wood |
| 16 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)12 mm thick |
| 17 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) floatincluding lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary screws.second class Kail wood |
| 18 | Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 19 | Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etccomplete.150x10mm |
| 20 | Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.75 mm |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 22 | 20mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 23 | Rough cast plaster upto 1Om height above ground levelwith a mixture of sand and gravel or crushed stone from 6mm to 1 Omm nominal size dashed over and including the freash plaster in two layer 10mm cement plaster 1:3 marked with 10% fernly grounded hydrated lime by volumn of cement. |
| 24 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position and other frame work:Budloo / Fir wood |
| 25 | Providing & fixing 12mm thick plywood with 4\" wide panelling T&G with nessary cornic and polished with two or more coat a new work including cost of wood filter. |
| 26 | Wooden planking, tongued and grooved in Hooring including fixing with iron screws complete: Second class deodar wood |
| 27 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5mm nominal size stone aggregate. Crushed. |
| 28 | Dumping stone excluding cost of stones in Horizontal on level |
| 29 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and in-eluding priming coat with cement primer |
| 30 | Dry random rubble masonry with hard stone in foundation and plinth:Using nallah stone without bond stone |
| 31 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. |
| 32 | Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(A) White Vitreous ChinaWhite Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps |
| 33 | Providing and fixing kitchen sink with C. I. brackets, C.F\". brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm |
| 34 | Providing and fixing waste pipe for sink or wash basin PVC waste fittings complete :32 mm dia. |
| 35 | Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. |
| 36 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia. |
| 37 | Providing and fixing PVC waste pipes :100 mm dia. |
| 38 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. a) 15 mm nominal bore |
| 39 | Providing and fixing geyser of 25 ltr |
| 40 | Providing and fixing water tank 500 ltr |
| 41 | Providing and laying 6\" thick mud phuska roofing mixed with Bhusa and sand including mud plastering the top layer complete job |
| 42 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 43 | Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 44 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet100 mm diameter |
| 45 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil |
| 46 | Random rubble stone masonry in foundation and plinth using nallah stone laid in mud mortar. |
| 47 | Providing and fixing of round ballies for roofing complete job |
| 48 | Providing and laying of local talboo for roof with 100mm thick mud phuska complete jo |
| 49 | Sundried brick masonry laid in mud mortar but including cost of brick and carriage of bricks. |
| 50 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood. |
| 51 | Providing and fixing panelled or paneled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately, all complete as per direction of engineer- in charge. 35 mm thick. |
| 52 | Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 |
| 53 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1: 4 (1 cement: 4 coarse sand) |
| 54 | Carriage of cement and steel from an average lead of 110 KM by MT |
| 55 | Carriage of sand and aggregate from an average lead of 20 KM by MT |
| 56 | Carriage of stone from an average lead of15 KM by MT |
| 57 | Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 15 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, withoutbox as required. |
| 58 | Wiring for 16 amp socket outlet with 2.5 mm FR/PVC insulated copper conductor cable in existingrecessed PVC conduit including sheet as required. |
| 59 | Supplying and fixing 0f 1 inch, ¾ inch pvc conduit capping/casing along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required. |
| 60 | Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection. |
| 61 | Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp 240 volt single pole mounted in recessed including m.s box complete as required. |
| 62 | Supply and fixing of combined 3 pin 240 volt 10 amp. Socket outlet with safety shutter and 10 amp. 240 volt single pole mounted in recessed including complete MS box complete as required. |
| 63 | 3 modular plate |
| 64 | 6 modular plate |
| 65 | 8 modular plate |
| 66 | 12 modular plate |
| 67 | Supply and fixing of MCB of following poles in the existing MCBDB complete with connections testing and commission etc, as required. A) Single p[ole 6/10/20 Amp |
| 68 | Supply and fixing of MCB of following poles in the existing MCBDB complete with connections testing and commission etc, as required. B) Double pole 63 amp |
| 69 | Wiring for change over 63 amp. And installation with complete accessories and hole on the wall as required . |
| 70 | Junction box 3 inches 250 grams G.I with holes for connection submersed in concrete with connections as required. |
| 71 | Supply and fixing the followinglight fixtures including all accessories like electronic ballasts coms etc, complete as required concealed / tube lightning 20 watt 3000k, round led luminaries as per Philips |
| 72 | Supply of 1100volt grade aluminium conductor KPLE insulated pvc sheath arranged complete as per specification as required 25 sqmm |
| 73 | Supply and fixing of following single pole and netural sheet steel MCB distribution box 240 volts on surface recess complete with tinned busbarnetural link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN |
AI Tender Summary
Tender Timeline
Feb 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender