|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 2 | With cement mortar 1:4 (1cement: 4 coarse sand) |
| 3 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 4 | Float glass panes of thickness 4 mm |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
| 8 | 300x16 mm |
| 9 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 10 | 200x10 mm |
| 11 | 150x10 mm |
| 12 | 100x10 mm |
| 13 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 14 | 125 mm |
| 15 | 100 mm |
| 16 | 75 mm |
| 17 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. |
| 18 | 250 mm weighing not less than 150 gms |
| 19 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 20 | Marine plywood conforming to IS: 710 |
| 21 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 22 | 40 mm thick with 20 mm nominal size stone aggregate |
| 23 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. |
| 24 | 18 mm thick |
| 25 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). |
| 26 | 6 mm thick Cement fiber board as per IS: 14862 |
| 27 | 12 mm cement plaster of mix : |
| 28 | 1:4 (1 cement: 4 coarse sand) |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 30 | New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : |
| 32 | New work (two or more coats) over and including waterthinnable priming coat with cement primer |
| 33 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : |
| 34 | Two or more coats on new work |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 36 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 37 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. |
| 38 | One or more coats on old work |
| 39 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 40 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)on existing cement paint surface |
| 41 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 42 | 10 litre capacity - White |
| 43 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 44 | Semi rigid pipe 40 mm dia |
| 45 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 46 | 15 mm dia nominal bore |
| 47 | 20 mm dia nominal bore |
| 48 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 49 | 25 mm dia nominal bore |
| 50 | Providing and fixing brass bib cock of approved quality : |
| 51 | 15 mm nominal bore |
| 52 | Providing and fixing brass stop cock of approved quality : |
| 53 | 15 mm nominal bore |
| 54 | 20 mm nominal bore |
| 55 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 56 | 25 mm nominal bore |
| 57 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 58 | 25 mm nominal bore |
| 59 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 60 | 45 cm length 15 mm nominal bore |
| 61 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 62 | 15 mm nominal bore |
| 63 | 20 mm nominal bore |
| 64 | 25 mm nominal bore |
| 65 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by Stone agrregate 40mm nominal size well rammed and consolidated and grouted with fine sand includingfinishing the top smooth. |
| 66 | Providing cement concrete surface drain including earthwork excavation 10 cm thick base concrete and 15 cm thick side wall with 1:4:8 ( 1 cement : 4 Coarse sand: 8 graded stone aggregate of 40 mm nominal size) cement concrete finished with 1:4 (1 cement : 4 sand) a floating coat of neat cement inside the drain and its top and exposed surface including earthwork in excavation and disposed of surplus earth etc. |
| 67 | 23 X 23 cm surface drain |
| 68 | Providing wood works in frames of doors, windows, celestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length( hold fast lugs or dash fastener shall be paid for separately). |
| 69 | superior hard wood cat-II |
| 70 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 71 | 35 mm thick shutter of superior hardwood cat-II |
| 72 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 73 | 35 mm thickof superior hard wood cat-II |
