|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 3 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 (1 cement : 6 sand) |
| 4 | Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. |
| 5 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade reinforced cement concrete. All wiork up to plinth level. |
| 6 | Random rubble dry stone Kharanja under floor. |
| 7 | Flyash Flyash Brick work with flyash Flyash Bricks of class designation 75 in superstructure above plinth level upto floor Three Level in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 8 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : |
| 9 | 20mm thick. |
| 10 | Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect. |
| 11 | New Work |
| 12 | Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor Three level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. |
| 13 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints and admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of engineer-in-charge. M-20 grade reinforced cement concrete. All work from plinth level up to floor Three Level.Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. |
| 14 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level.Hot rolled deformed bars (IS : 1139). |
| 15 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work |
| 17 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 18 | Polished Blue Kota stone flooring skirting, laid over 20 mm thick base of C.M. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 2001 to 5000 Sq.Cm :25 mm thick slab. |
| 19 | Cement concrete pavement of required thickness with (b) 1:1.5:3 (1-Cement:1.5-course sand : 3-graded stone aggregate 20 mm nominal size) including finishing complete. |
| 20 | Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound completeandno glass strips are used andnot applying 2 coats of hot bitumen complete as per specifications. 50mm thick. |
| 21 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. |
| 22 | 110 mm dia |
| 23 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt.Not less than 600 gm, 25mm. |
| 24 | P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make: CP Brass Concealed Stop Cock 15mm. |
| 25 | P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) |
| 26 | Size 510 mm |
| 27 | P & F WVC Foot- rest (IS : 2556 Mark) including cutting and making good the floor size: 250x125x25mm. |
| 28 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. |
| 29 | Flat Back (small) size 456x355x265mm. |
| 30 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. |
| 31 | Makrana II quality marble having light spots |
| 32 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: |
| 33 | PVC withPVCbend and superior internal fittings |
| 34 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: |
| 35 | Size 510 mm x 400 mm |
| 36 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. |
| 37 | 15mm dia nominal bore |
| 38 | \"A\" Class |
| 39 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make: |
| 40 | C.P. Pillar cock, 15 mm dia nominal bore |
| 41 | Synthetic MATERIAL(PTMT) bib cock of approved quality/ make, nominal bore,15mm, 86 mm long. |
| 42 | P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make: |
| 43 | Brass 400 gm. 15mm nominal bore. |
| 44 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : |
| 45 | Brass wt.Not less than 400 gm, 20mm. |
| 46 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
| 47 | C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 48 | P & F 15 mm. Dia Connection Pipe of approved quality/make : |
| 49 | PVC pipe withC.P. Brass nuts upto length, 300mm |
| 50 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: |
| 51 | 1000 litres capacity. |
| 52 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : |
| 53 | 15mm dia nominal bore |
| 54 | 20mm dia nominal bore |
| 55 | 50mm dia nominal bore |
| 56 | Angular stop cock with long thread 15 mm nominal size |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) |
| 58 | 20mm nominal outer dia pipes |
| 59 | 50 mm nominal outer dia pipes |
| 60 | Wiring of twin control light /fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unshethed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size FR PVC insulated unslated unsheathed flexible copper earth conductor 1.1 kv grade (IS:694) of approved make in surface / recessed ISI marked MMS (IS:9537 P - III) PVC conduit & it\"s accessories, round tles, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. Short point (up to 3 mtr.) |
| 61 | (A) Short Point (up to 3mtr) |
| 62 | (B) Medium Point (up to 6mtr) |
| 63 | ( C ) Long Point (up to 10mtr) |
| 64 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. |
| 65 | 2 x 2.5 sq. mm + 1x1.5 sqmm |
| 66 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828(1996)/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. single pole mcb |
| 67 | 6A to 32A rating |
| 68 | P&F 18 swg M.S. Recessed fan box, hexagonal/round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side. |
| 69 | P & F fluorscent tube fitting fabricated from prephosphated and powder coated CRCA steel and finish with powder coating/ stove enamelled paint)/ (extruded non corrosive UV resist EP channel) complete with accessories ( Low loss copper choke,starter,startes seat)like Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required, (without tube) |
| 70 | 1 x 36 Watts EB |
| 71 | P & Ffluorscent tube rod in existing fixture as required. |
| 72 | 36/40 Watt |
