Housing Urban and Rular Development Local Bodies Closing in 0 days TDR #31179115

Kadavur - Mplads - Construction Of Community Hall At Tharagampatty Refer Tender Document

Issued by Local Bodies · kadavur, Tamil Nadu
Tender Value
46.49 Lakhs
Estimated cost
Bid Submission
07 Mar 2022
0 days left
EMD
49400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kadavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Kadavur - Mplads - Construction Of Community Hall At Tharagampatty Refer Tender Document

BOQ

Name of Work:Construction of Community Hall at Tharagampatty H/O Tharagampatty Under MPLADS Scheme
Sl. No. Item Description
1Name of the Work :Construction of Community Hall at Tharagampatty H/O Tharagampatty
2Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification
3Cement concrete 1:4:8 mix using 40mm iss HBG metal for foundation & flooring including labour charges etc., complete
4Brickwork in CM 1:5 mix using country bricks ground maded of size 23 x 11 x 7 cm including cost and conveyance of all materials etc., complete.
5Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X \"3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.
6Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors etc., complete
7RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excludingcentering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixingfan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete.
8Plastering surfaces of RCC itemssuch as slabs,beams,sunshades with Cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete complying with standard specifications.
9Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.
10Providing Granolythic floor finish in cement concrete 1:2:4 mix using 10-12 mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc.,
11Supplying and Paving the floor with Doble chargedVetrified tiles 0.60mx0.6mx0.008m for approved qualitycost and conveyance of all materials to site and all labour charges etc complete
12Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm includingcost and conveyance of all materials to site and all labour charges etc complete
13Dadooing of walls with colour glazed tiles of size 300x200x6 mmof best qualityincluding cost and conveyance of all materials to site and all labour charges etc complete.
14Weathering course with brick jelly lime concrete using 20mm brick jelly withpure lime of 32:12.5 including cost and conveyance of all materials to site and all labour charges etc.,
15Finishing the top of roof with one cource of machine pressed tiles laid in cm 1:3 mix including cost and conveyance of all materials to site and all labour charges etc.,
16Distembering two coatsusing shell lime including cost and conveyance of all materials to site and all labour charges etc comopleteCeiling.
17Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .
18Painting with ready mixed paint two coats including cost & conveyance to size and all labour charges etc., complete.
19Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer.
20D Teak Wodden Door size1.50m x 2.10 m
21D Door size1.50m x 2.10 m
22D1 Door size0.90m x 2.10 m
23D2 Door size 0.75m x 2.10 m
24window 1.20m x 1.20m
25window 1.50m x 1.20m
26Ventilator 0.90m x 0.45m
27PVC 110mm dia Rain Water Pipe
28PVC 110mm diaPipe
29Supplying & Fixing in positionof Indian type Water closet 580x440mm of approved quality with 100mm\" P\" or\"S\" trap with all internal fittings etc., complete complying with standared specification
30Supplying and fixing in position ordinary Colour glazed Eropean water closet of best quality and approved make with 100mm\" P\" or\"S\" trap with double flapped rigit P.V.C seat level flushing tank with 10 liters PVC low level Flushing tank with all internal fittings etc., complete complying with standared specification
31Supplying and Fixing inpositionof best quality make White glazed washbasin of size 550x 400mm
32Supplying and fixing following Electrical arrangement
33a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable color for open PVC light point and fan point (for electronic regulator)
34b)Supply and fixing CFL light fittng and all labor charges tc complete
35c)Supply and fixing of single Type street light Flu.fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Tube light
36d)Supply and fixing of single Type street light Flu.fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Street light
37e)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc unsheated Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with 150x100x113Tw switch box for 5A3 pin non iter locking with painting of suitable colour for PLUG POINT
38f)Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains
39g)Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main
40h)Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main
41i)Supplying and fixing of 1200mm(40\")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp
42Provision for Exhaust fan
43GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package}

AI Tender Summary

OUR REF NO 31179115
AUTHORITY Local Bodies
TENDER VALUE 46.49 Lakhs
LAST DATE 07-03-2022
Authority
Authority Name Rural Development And Panchayats Department
Work Description Kadavur - Mplads - Construction Of Community Hall At Tharagampatty Refer Tender Document
Basic Detail
Tender No Karur District - Kadavur - MPLADS Scheme
Bidding Type Tender
Location
City kadavur
State Tamil Nadu
Key Dates
Publish Date 22 Feb 2022
Submission Date 07 Mar 2022
Open Date 07 Mar 2022
Finance
Tender Value 46.49 Lakhs
Tender Fee Ref. Documents
EMD 49400
Exemption Not Available
Document List
BOQ_263633.xls
TenderDocument.pdf
Tendernotice_1.pdf
b83a1fc1-be9b-4852-88f9-5dd1539bb665.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 22, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 07, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 07, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_263633.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

html

b83a1fc1-be9b-4852-88f9-5dd1539bb665.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders