Heavy Industries and Public Enterprises Government Departments Closing in 0 days TDR #31171142

Construction Veterinary Dispensary At Kholanaal Distt. Mandi ( Hp ) .

Issued by Government Departments · mandi, Himachal Pradesh
Tender Value
16.07 Lakhs
Estimated cost
Bid Submission
28 Feb 2022
0 days left
EMD
31600
Bank guarantee accepted
Document Fee
1800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Veterinary Dispensary At Kholanaal Distt. Mandi ( Hp ) .

BOQ

Name of Work: C/o Veterinary Dispensary at Kholanaal Distt. Mandi(H.P).
Sl. No. Item Description
1Cutting in earth work and disposal of excavated earth upto all leads and lifts.
2Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto all leads and lifts.
3Providing & laying cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.
4Random rubble/ploygonal rubble(uncoursed/ brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand). in retaining walls.
5Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agregate 25mm nominal size ) and curringcomplete excluding cost of form work in foundation and plinth.
6Boulder filling with hand packed properly with kharanja stones compact interstices complete in all respect
7Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shutteringstrutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- (a) Foundation footing bases of columns etc. and mass concrete.
8b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain.
9(c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.
10(d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.
11(e) vertical surface sch as wall any thickness partition plaster and string course and like
12(e) stair cases with slopping or stopped soffits exclding landing
13Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in a)foundation,footings
14b) Columns, pillars, posts and struts upto floor two level.
15c) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.
16d) stair cases ( except spiral) stair cases excluding landing but i/c preparing of the surface and finished of nosingup to floor two level
17Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level.
18Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all hight.
19Prooviding wood work in frames of doors, windows, clearestory windows and other framed and fixed in postion. 1st. Class hard wood/sal wood.
20Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and immeging in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size).
21Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 40mm thick Ist.Class Deodar Wood.
22Providing and fixingwire guage shuter using galvanised m.S> wire guage of I.S. guage designation 85G with wire of dia 0.56mm for door windows and clearstory windows with necessary screws 40 mm thick second class deodar wood
23Providing & fixing aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete(i) 250mm x 16mm.
24Providing and fixing aluminium tower bolts (barrel type )anodized transparent or dyed to required shade & colour.(a)200 x 10mm
25(b) 150x10mm
26Prooviding and fixing aluminium finshed brass handles with nuts and secrews etc complete. (a) 125mm.
27Providing and fixing oxidized MS hooks and eyes 250mm
28Providing and fixing 100mm bright finished brass floor door stopper complete in all respect.
29Providing and fixing 150mm bright finished brass door Closer complete in all respect.
30Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat with reguler modified polyster (RNP) organic coated of 20 microns over 5 micron primer coating to back coat of polyster of 5 microns over 5 micron primer coating i/c fixing with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer incharge.
31Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:-(a) In trussesand trussed purlins in building.
32(b) In gratings framed guard bars, ladders, railing, brackets and similar works.
33Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat with reguler modified polyster (RNP) organic coated of 20 microns over 5 micron primer coating to back coat of polyster of 5 microns over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, Bolts, and Nuts 6mm dia & prepainted G.I limpet and bitumen washers complete with all accessories as required as per the direction of Engineer incharge.
34Providing and fixing M.S.B.P sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling i/c cutting fixing & welding to steel roof members & appling a coat of red lead primer complete as per the instruction of Engineer incharge.( base mambers of steel work shall be measured & paid sepertely.
3515mm cement plaster in singale coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).
3615mm cement plaster in singale coat on the Fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).
37Providing and fixing in position collapsible shutter with vertical channel 200x10x2mm and braced with flat iron daigonal 20x5mm size with top and bottom rail of T iron 40x40x6mm with 38mm dia steel pulley complete with bolts and nuts and locking arrangement stopper handle including applying primer coat of red lead paint.
38Providing and fixing 10mm thick antiskid waterproof stain and impact resistant heavy dutyvitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.
39White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement: 3sand) & finished with flush pointing in white cement. White glazed tiles in treads of steps not exceeding 30cm in width.
40Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size) under layer of 75mm (unconsolidated bed of dry brick/stone aggregate 40mm nominal size with rammed and grouted with fine sand including preparation of ground.
41Appling birla white wall care putty over plaster surface after thoroughly brushing the surfacefree from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.
42Appling priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink.
43Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter. Enamal other than white.
44Providing and fixing M.S. grills of required pattern in wooden frames of windows flat square or round bars with round headed bolts and nuts or by screws, plain grills.
45Appling priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knottingReady mixed pain brushing red oxide/zink oxide chrome.
46Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.
47Conustructing course rubble hammer dressed U shape open surface drain with side wall 15X22cm in cement mortar 1:6 (1cement:6sand)and inside plastering with cement plaster 1:3 including earth and laying 10cm concrete in 1:5:10 of 40mm nominal size and 7.5cm cement concrete 1:2:4 of 20mm nominal size and finished with a floating coat of neat cement as per standard desig
48P/F on wall face PVC ( D-plast) rain water pipes for working pressure not less than 4.5 kg/ sqm i/c filling the joints with approved adhesive complete-100mm dia pipe
49P/F m.s. holder bat clamps of approved design to CI AND SCI pipes 100mm dia
50Cement Concrete flooring 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with of floating coat of neat cement 40mm thick
51Providing and fixing vitreous china wash, down water closet (European type, W.C. pan) with integral `P\" or S trap inlcuding jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) (Seat and cover to be measured and paid for separately).(Ordinary Closet).
52Providing and fixing PVC cistern 10.00 / 12.50 ltrs. capacity vitreous china low level flushing cistern with a pouir of C.I or mild steel brackets complete with fitiings.
53Providing and fixing PVC connection.
54Providing and fixing PVC P trap Complete in all respect 110mm
55Providing & fixing CP stop cocks 15mm dia (Jagour/excel Make).
56Providing & fixng PVC waste pipe for wash basin or sink 32mm dia.
57Providing & fixing CP brass bib tap with capastan head 15mm dia. (Jaguar/Excel Make).
58P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws.
59Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm.
60Providing and fixing to wall ceiling and floor G.I. pipe(Heavy Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor
61Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia.
62Providing and fixing plastic seat(solid cover) and cover for wash down water closet with C.P. Brass hinges and rubber buffer in white plastic seat cover
63Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality.
64P/F zet for W.C complete in all respect
65Providing and fixing PVC water storage tank. 1000 ltrs. Capacity with all necessary fittings.
66Providing and fixing G.I. or M.I. unions. 15mm dia.
67Providing & laying PVC pipe 100mm dia.
68Providing & fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make. (Cera/Pariware make).
69Providing & fixing C.P. pillar tap with capaston head. 15mm dia.
70Providing and fixing brass full way valve with wheel 15mm nominal szie.
71Providing and fixing glass shelves complete in all respect.
72Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.
73P/F PVC bend100mm complete
74P/F PVC collors ISI markes i/cfixing with approved adhesive etc. complete 110mm
75P/F PVC plain double equal branch ISI marked i/c fixing with approved adhesive etccomplete 110mm
76P/F stainless steel Kitchen sink of approved standred ISI make with drain board and C.P waste with C.I or M.S brackets painted white i/c cutting holes and making good the same but excluding fitting 470x420mm with bowl depth 178mm
77Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.
78Finishing wall withh weather proofinterior grade emulsion of approved design (Apexultima) on undecorated conc./stone/pilaster wall surfaces to give an even shade i/c thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth i/c appling of putty a required for metling the surface
79P/L heavy Duty precast cement concrete interlocking paver blocks vibro compacted upto M-30 grade i/c border or hrub block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement 1:4 (1cement:4Sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complte (sub base concrete floor to be paid forseprately) 80mm thick interlocking blocks
80Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts.

AI Tender Summary

OUR REF NO 31171142
AUTHORITY Government Departments
TENDER VALUE 16.07 Lakhs
LAST DATE 28-02-2022
Authority
Authority Name Himachal Pradesh State Industrial Development Corporation Limited
Work Description Construction Veterinary Dispensary At Kholanaal Distt. Mandi ( Hp ) .
Basic Detail
Tender No Job No. 16
Bidding Type Tender
Location
City mandi
State Himachal Pradesh
Key Dates
Publish Date 21 Feb 2022
Submission Date 28 Feb 2022
Open Date 02 Mar 2022
Finance
Tender Value 16.07 Lakhs
Tender Fee 1800
EMD 31600
Exemption Not Available
Document List
ff1131b3-da9a-44ce-b1d2-20ef80af6815.html
Agreement.pdf
approvedmakes.pdf
BOQ_86063.xls
specialconditions.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 21, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 28, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 02, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

ff1131b3-da9a-44ce-b1d2-20ef80af6815.html

pdf

Agreement.pdf

pdf

approvedmakes.pdf

xls

BOQ_86063.xls

pdf

specialconditions.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders