Procurement Of Furniture For Newly Constructed Building At Bakhshi Stadium Srinagar. Procurement Of Furniture For Newly Constructed Building At Bakhshi Stadium Srinagar. , Supplying & Placing Executive Table In Completely Knock Down Conditions With An Ov, srinagar-Jammu And Kashmir

Procurement Of Furniture For Newly Constructed Building At Bakhshi Stadium Srinagar. Procurement Of Furniture For Newly Constructed Building At Bakhshi Stadium Srinagar. , Supplying & Placing Executive Table In Completely Knock Down Conditions With An Overall Size 1600Mm X 750Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Be Made Up Of 25Mm Thick Particle Board With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 280Mm. The Trey Shall Be Operated On Keyboard Channel. The Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Shall Be 18Mm Thick Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. A Movable Type Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm. The Cpu Unit Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Mounted On Nylon Castors. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Providing And Supplying High Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Plywood Padded With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ And The Back Shall Be Made Up Of Double Layered Mouldedhot Pressed Plywood ( 12+6 ) Mm Thick Padded With Hr Polyurethane Foam 40Mm Thick Having Density 32Kg / M³. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Of The Chair Shall Be Masde By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With Powder Coasted Hr Steel Spine And The Armrest Shall Be Used Fixed Pp Arm Completely Joint With Seat. Foe Seating Durability The Chair Shall Have Swivel Tilt 360 Degree Revolving Mechanism With Single Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating User Can Adjust Seat Height Upto 100Mm With Bifma Standard Class-3 Gaslift. The Pedestal Should Have Five Legged Injection Moulded In Black Nylon 30% Glass Filled Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors Which Shall Be Made Of Injection Moulded In Black Nylon 30% Glass Filled. The Seat Size Shall Be 485±10 Mm ( W ) X 485±10 Mm ( D ) And Back Size Shall Be 695±10 Mm ( H ) From Seat & Overall Height = 1120±10 Mm. , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick. The Understructure Shall Consist Of Pipe Frame Leg Of Ss Having Cross-Section Area 30Mm X 30Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm ( D ) X 1540±10 Mm ( W ) , Seat Height = 420±10 Mm, Overall Width = 1800±10 Mm, Overall Depth = 760±10 Mm & Overall Height = 800±10 Mm. , Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick. The Understructure Shall Consist Of Pipe Frame Leg Of Ss Having Cross-Section Area 30Mm X 30Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm ( D ) X 540±10 Mm ( W ) , Seat Height = 420±10 Mm, Overall Width = 800±10 Mm, Overall Depth = 760±10 Mm & Overall Height = 800±10 Mm. , Supplying & Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 30Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Lower Shelf Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board. The Under Structure Shall Consist Of Ss 202 Grade Shiny Chrome Finish Pipe Frame Having Cross-Section Area 30Mm X 15Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying & Placing Center Table With An Overall Size 650Mm X 650Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 30Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Top Profile Shall Be In Square Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Lower Top Of The Table Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board. The Under Structure Shall Have Ss 202 Grade With Shiny Chrome Finish Pipe Frame With Cross-Section Area 30Mm X 15Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supply Of Storage Cabinet / Almirah Made In Black Board / Mdf With Necessary Hardware Fitting For Hanging Clothes Duly Lacquer Polished . Size 2400 Mm X 1200 Mm , Supply Of Stone Made In Black Board / Mdf With Necessary Hardware Fittings For Hanging Cloth Lacquer Polished Size 2400 Mm X 1200 Mm , Basic Bed With Flat Plateform, Ms Head & Foot Panel, Powder Coated, Overall Dimension - 1800Mm X 900Mm X 510Mm , Supplying & Placing Visitor Chair Ergonomically Designed For User Comfort & Shall Have Asthetically Appealing Design. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg / M³ Upholstered With Leatherite In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layered Moulded Hot Pressed Malaysian Plywood ( 12+6 ) Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg / M³ Upholstered With Leatherite In Black Colour With 0.8Mm Thick And 535 Gsm. The Frame Shall Be Cantilever Support Made Up Of Ms Crca Chrome Plated Round Pipe Of Dia 25.4Mm With 2Mm Thick. The Armrest Shall Be Covered With Wooden Arm. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor . The Seat Size Shall Be 475±10Mm ( W ) X 490±10Mm ( D ) And Back Size Shall Be 470±10Mm ( H ) From Seat & Overall Height = 930±10Mm. , Providing And Supplying Of Revolving Stool, Ss Top, Height Adjustable ( 510Mm - 690Mm ) , Minimum Approx Height 510 Mm, Maximum Approx Height 690Mm Tubular Four Feetbase Of 25.4Mm Od X 16G Thick Tube. Adjustment In Height By 25.4Mm X 4 Tpi Accurately Machined Screw Is Covered With 38.1Mm X 16G Vertical Ms Round Tube Welded With Four Feet.The Revolving Stool Have Approximately 300Mm Dia Stainless Steel Top With Bent Burr Free Edges & Both Ss Top And Support Of Ms Top Should Be In Same Design.There Should Not Be Any Weldingand Any Pop Rivet Or Screw To Fixss Top And Ms Top .It Should Be Air Tight Without Any Welding And Pop Rivet.The Revolving Stool Should Have Pvc Shoe With Nylon Reinforcement.The Base Frame Should Be Epoxy Powder Coated.The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso:9001, Iso:50001, Iso:14001, Iso 45001:2018 , Bifma, Aiota For One Or More Product, Green Guard Certificate For Any One Product Atlest Issued By Ul Of Usa. , Providing And Supplying Visitor Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ And The Back Shall Be Made Of Metal Insert Ms Frame Padded With High Resilience Polyurethane Foam Having Density 32Kg / M³. The Same Shall Be Upholstered With Leatherite Tapestry 1Mm Thick And 571 Gsm. The Seat And Back Shall Be Arrested Together With Powder Coated Hr Steel Spine And The Armrest Shall Be Used Fixed Pp Arm Completely Joint With Seat. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms / Crca Chrome Plated Round Pipe Dia 25.4Mm With 2Mm Thick.There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 490±10 Mm ( D ) X 490±10 Mm ( W ) And Back Size Shall Be 440±10 Mm ( W ) X 500±10 Mm ( H ) From Seat. Overall Height Shall Be = 940±10 Mm, Overall Depth = 620±10 Mm & Overall Width = 620±10 Mm. , Providing And Supplying Fowler Bed Should Have Overall Approx Size 2060Mm L X 900 Mm Wx 600 Mm Height.Main Frame Should Be Made From5 Cmsx3 Cms X 16G Erw Rectangular Tube. Fowler Bed Foursection Top Should Be Made Of 25 X 25 Mm Squareor Round Crc Pipe In 16 G And18 G C.R.C Sheets Uniformly Perforated And Should Be Suitably Fitted To The Main Frame.Fowler Bed Should Have16g Erw Roundtube Withnon Rusting Wheel Of Minimum125 Mm Dia Two With Lock.Back Rest And Knee Rest Should Be Maneuvered By The Screw Mechanism ( Removable Handle-Fully Ss ) Welded With Approx. 31.7 Mm Dia. X 16 G Erw M. S. Tube For Linear Movement In Approx.38 Mm Dia. X 16 G Erw M. S. Cover Tube Which Can Be Smoothly Operated.The Screw Mechanism Should Be Made By Cnc Machine For Better Movement.Fowler Bed Have Detachable Handle Complete Ss With Pvc Grip.Fowler Bed Have Ss Laminated Head And Foot Panel.The Fowler Bed Should Have Four Location For Iv Rod.The Fowler Bed Should Have Four Corner Buffer To Prevent Any Damage.All The Mild Steel Components Should Be Pretreated For De Greasing, De-Rusting And Phosphating In 7 Tanks Process.After Proper Pre-Treatment The Mild Steel Components Are To Be Epoxy Powdercoated And Oven Baked At Temperature Of 180-200 Degree.The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso:9001, Iso:50001, Iso:14001, Iso 45001:2018 , Bifma, Aiota For One Or More Product, Green Guard Certificate For Any One Product Atlest Issued By Ul Of Usa. , Providing And Supplying Of Crash Cart Having Overall Dimension Of 1048 X 475 X 1555Mmframe Is Made Up Of Stainless Tube Of Dia 25Mm X 1.2Mm .Ss Cylinder Case Is Used Welded With Cylinder Holding Unit To Hook.Ss 304 Grade Pipe Of Section 12Mm Is Used To Provide Provision For Diagonal Locking., Complete Ss Frame, Polystyrene Lockable Storage.Ss304 Hand;E Pipe Should Be Used With A Section Of 25.4Mm X 365Mm Length.Load Testing To Be Done@40 Kgs.Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To The Thickness 40-50? Thick.The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso:9001, Iso:50001, Iso:14001, Iso 45001:2018 , Bifma, Aiota For One Or More Product, Green Guard Certificate For Any One Product Atlest Issued By Ul Of Usa. , Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1320Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions ( Pre-Treated ) And Duly Powder Coated With 40?-60? Thick. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways & 4 Ways ( L-Cover For Corner, T-Cover For Middle Section Wherever Required ) . The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm ( H ) X 60Mm ( D ) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board ( With Fabric ) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data ( Lan ) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots / Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Storage Cabinet Lockers Made In Engineered Wood With Necessary Hardware Fitting For Hanging Clothes Duly Lacquer Polished Size 1800 Mm H X 900 Mm W X 480 Mm D , Supplying & Placing Cafeteria Table With An Overall Size 1500Mm X 900Mm X 750Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Rectangle Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Size 40Mm X 20Mm With 1.6Mm Thick. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifma Membership & Aiota Certification. , Providing And Supplying A Cafe Chair With User Comfert. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resiliance Polyurethane Foam 30Mm Thick Having Density 60Kg / M³ And The Back Shall Be Made Of Metal Pipe Frame Padded With High Resiliance Polyurethane Foam 19Mm Thick Having Density 23Kg / M³. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick 535Gsm. The Chair Shall Be Supplied With Metal Frame And The Understructure Shall Be Supported On Four Legs Made Up Of Ss Tubular Pipe Having Size 30Mm X 15Mm With 1.6Mm Thick And The Base Of The Seat Shall Be Supported On 20Mm X 10Mm Pipe Frame. There Shall Be Ppcp Shoe Provided At Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 440±10 Mm ( D ) X 460±10 Mm ( W ) And Back Size Shall Be 400±10 Mm ( W ) X 440±10 Mm ( H ) From Seat. Overall Height Shall Be = 890±10 Mm, Overall Depth = 570±10 Mm. , Supplying & Placing Cafeteria Table With An Overall Size 1500Mm X 900Mm X 750Mm. The Top Of The Table Shall Be Made Up Of 12Mm Thick Black Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Ss 202 Grade Pipe Frame With Vacuum Caps. The Understructure Shall Have Ss 202 Grade Pipe Frame With Size 30Mm X 15Mm. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. , Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Auditorium Chair. The Seat Shall Be Made Of 12Mm Thick Hot Pressed Plywood With Hr Polyurethane Foam Upholstered With Fire Retardent Fabric Tapestry And The Back Shall Be Made Of 15Mm Plywood Withpu Foam. The Chair Shall Have A Seat Sliding Mechanism. The Armrest Shall Be Made Of Pp Having Cup Holder. All Metal Components Shall Be Powder Coated In Black Colour With Min 40-60 Micron. The Grouting Plate Shall Be Welded Having Size 170Mm X 85Mm X 3.5Mm Thick. Seat Size Shall Be 470±10Mm ( W ) X 440±10Mm ( D ) And Back Size Shall Be 820±10Mm ( H ) From Seat X 540±10Mm ( W ) , & Overall Height = 1040±10Mm. , Supplying And Placing Three Seater Sofa That Shall Be Constructed From 12Mm Thick Hot Pressed Commercial Plywood. The Sofa Shall Be Supported On Ms Chrome Plated And The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back For Comfort And Lumbar Support. The Arm Shall Be Provided Ms Chrome Plated Round Pipe Having Dia. 25.4Mm. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±.1Mm Thick And 535 Gsm. The Under Structure Shall Consist Of Ms Chrome Plated Round Pipe Frame Having Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. Overall Width = 1650±10 Mm, Overall Depth = 630±10 Mm & Overall Height = 860±10 Mm. , Supply , Installation , Testing And Commissioning Providing And Fixing Of Roller / Zebra Blind

INR 5500 /-

INR 644200.0 /-

INR 3.22 Crore /-

Name of Work: Procurement of furniture for newly Constructed Building at Bakhshi Stadium Srinagar.

Sl. No.	Item Description
1	Supplying & Placing executive table in completely knock down conditions with an overall size 1600mm X 750mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick particle board with approved laminate and finish as per approved shade. The profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. A movable type CPU unit shall be provided with an overall size 468mm X 284mm. The CPU unit shall be made up of 18mm thick Pre-laminated particle board and mounted on nylon castors. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.
2	Providing and supplying High back chair. The seat shall be made of 15mm thick hot pressed plywood padded with HR polyurethane foam 50mm thick having density 40kg/m³ and the back shall be made up of double layered mouldedhot pressed plywood (12+6)mm thick padded with HR polyurethane foam 40mm thick having density 32kg/m³. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest of the chair shall be masde by keeping the natural curvature of the spine. The seat and back shall be arrested together with powder coasted HR steel spine and the armrest shall be used fixed PP arm completely joint with seat. Foe seating durability the chair shall have swivel tilt 360 degree revolving mechanism with single position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating user can adjust seat height upto 100mm with BIFMA standard class-3 gaslift. The pedestal should have five legged injection moulded in black nylon 30% glass filled having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded in black nylon 30% glass filled. The seat size shall be 485±10 mm(W) X 485±10 mm(D) and back size shall be 695±10 mm(H) from seat & overall height = 1120±10 mm.
3	Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with leatherite tapestry 1±0.2 mm thick. The understructure shall consist of pipe frame leg of SS having cross-section area 30mm X 30mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 1540±10 mm(W), seat height = 420±10 mm, overall width = 1800±10 mm, overall depth = 760±10 mm & overall height = 800±10 mm.
4	Supplying and placing single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with leatherite tapestry 1±0.2 mm thick. The understructure shall consist of pipe frame leg of SS having cross-section area 30mm X 30mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 540±10 mm(W), seat height = 420±10 mm, overall width = 800±10 mm, overall depth = 760±10 mm & overall height = 800±10 mm.
5	Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top shall be made up of 30mm thick Pre-laminated particle board of grade II of IS 12823. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The lower shelf shall be made up of 18mm thick Pre-laminated particle board. The under structure shall consist of SS 202 grade shiny chrome finish pipe frame having cross-section area 30mm X 15mm. There shall be shoe provided at the bottom to avoid scratches on the floor.
6	Supplying & placing center table with an overall size 650mm X 650mm X 450mm. The top of the table shall be made up of 30mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in square shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The lower top of the table shall be made up of 18mm thick Pre-laminated particle board. The under structure shall have SS 202 grade with shiny chrome finish pipe frame with cross-section area 30mm X 15mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.
7	Supply of Storage cabinet /Almirah made in black board /MDF with necessary hardware fitting for hanging clothes duly lacquer polished . Size 2400 MM x 1200 MM
8	Supply of stone made in black board /MDF with necessary hardware fittings for hanging cloth lacquer polished Size 2400 MM x 1200 MM
9	Basic Bed With Flat Plateform, MS Head & Foot Panel, Powder Coated, Overall Dimension - 1800mm X 900mm X 510mm
10	Supplying & Placing Visitor Chair ergonomically designed for user comfort & shall have asthetically appealing design. The seat shall be made of 15mm thick hot pressed malaysian plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with leatherite in black colour with 0.8mm thick and 535 GSM and the back shall be made of double layered moulded hot pressed Malaysian plywood (12+6)mm thick with HR polyurethane foam 30mm thick having density 32kg/m³ upholstered with leatherite in black colour with 0.8mm thick and 535 GSM. The frame shall be cantilever support made up of MS CRCA chrome plated round pipe of Dia 25.4mm with 2mm thick. The armrest shall be covered with wooden arm. There shall be PPCP shoe provided at the base to avoid scratches on the floor . The Seat size shall be 475±10mm(W) X 490±10mm(D) and back size shall be 470±10mm(H) from seat & overall height = 930±10mm.
11	Providing and supplying of revolving stool, ss top, height adjustable (510mm - 690mm), minimum approx height 510 mm, maximum approx height 690mm tubular four feetbase of 25.4mm od x 16g thick tube. adjustment in height by 25.4mm x 4 tpi accurately machined screw is covered with 38.1mm x 16g vertical ms round tube welded with four feet.the revolving stool have approximately 300mm dia stainless steel top with bent burr free edges & both ss top and support of ms top should be in same design.there should not be any weldingand any pop rivet or screw to fixss top and ms top .it should be air tight without any welding and pop rivet.the revolving stool should have pvc shoe with nylon reinforcement.the base frame should be epoxy powder coated.The participating brand must have all the prevalent quality & safety related certifications like ISO:9001, ISO:50001, ISO:14001, ISO 45001:2018 , BIFMA, AIOTA for one or more product, Green Guard certificate for any one product atlest issued by UL of USA.
12	Providing and supplying Visitor Chair. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 40kg/m³ and the back shall be made of metal insert MS frame padded with high resilience polyurethane foam having density 32kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick and 571 GSM. The seat and back shall be arrested together with powder coated HR steel spine and the armrest shall be used fixed PP arm completely joint with seat. The frame structure shall be cantilever support type made up of MS/CRCA chrome plated round pipe Dia 25.4mm with 2mm thick.There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 490±10 mm(D) X 490±10 mm(W) and back size shall be 440±10 mm(W) X 500±10 mm(H) from seat. Overall height shall be = 940±10 mm, overall depth = 620±10 mm & overall width = 620±10 mm.
13	Providing and Supplying fowler bed should have overall approx size 2060mm L X 900 mm WX 600 mm height.Main frame should be made from5 cmsX3 cms X 16G ERW rectangular tube. Fowler bed foursection top should be made of 25 X 25 mm squareOr Round CRC pipe in 16 G and18 G C.R.C sheets uniformly perforated and should be suitably fitted to the main frame.Fowler bed should have16G ERW roundtube withNon Rusting wheel of minimum125 MM dia two with lock.Back rest and knee rest should be maneuvered by the screw mechanism(Removable Handle-fully SS) welded with approx. 31.7 mm dia. X 16 G ERW M. S. Tube for linear movement in approx.38 mm dia. X 16 G ERW M. S. cover tube which can be smoothly operated.The screw mechanism Should be made By CNC machine for better movement.Fowler bed have detachable handle complete SS with PVC grip.Fowler bed have SS laminated head and foot panel.The fowler bed should have four location for IV rod.The Fowler Bed Should have four corner buffer to prevent any damage.All the Mild Steel Components should be Pretreated for De greasing,De-rusting and phosphating In 7 tanks process.After Proper Pre-Treatment The Mild steel Components are to be epoxy powdercoated and oven baked at Temperature of 180-200 degree.The participating brand must have all the prevalent quality & safety related certifications like ISO:9001, ISO:50001, ISO:14001, ISO 45001:2018 , BIFMA, AIOTA for one or more product, Green Guard certificate for any one product atlest issued by UL of USA.
14	Providing and supplying of Crash Cart having overall dimension of 1048 X 475 X 1555mmFrame is made up of Stainless Tube of dia 25mm X 1.2mm .SS cylinder case is used welded with cylinder holding unit to hook.SS 304 grade pipe of section 12mm is used to provide provision for diagonal locking., Complete SS Frame, Polystyrene Lockable Storage.SS304 Hand;e Pipe should be used with a section of 25.4mm X 365mm length.Load testing to be done@40 kgs.Complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50µ thick.The participating brand must have all the prevalent quality & safety related certifications like ISO:9001, ISO:50001, ISO:14001, ISO 45001:2018 , BIFMA, AIOTA for one or more product, Green Guard certificate for any one product atlest issued by UL of USA.
15	Providing and placing workstation table in completely knock down conditions with an overall size 1320mm X 660mm X 1200mm that is to be assembled at site. The work top shall have the size 1200mm X 600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 525mm X 350mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in the front side of user as well as on the both sides of the user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40µ-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Fixed type pedestal shall be provided with an overall size 400mm X 450mm X 725mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A nylon castor based CPU unit shall be provided with an overall size 468mm X 284mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.
16	Storage cabinet lockers made in Engineered Wood with necessary hardware fitting for hanging clothes duly lacquer polished Size 1800 MM H X 900 MM W X 480 MM D
17	Supplying & placing cafeteria table with an overall size 1500mm X 900mm X 750mm. The top of the table shall be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminated. The top profile shall be in rectangle shape with round corner and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on MS powder coated pipe frame having size 40mm X 20mm with 1.6mm thick. The legs shall have the combination of MS powder coated and chrome plated. The Joints shall be made by using TIG welding. There shall be adjustable leveler provided with metal insert at bottom to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership & AIOTA certification.
18	Providing and supplying a cafe chair with user comfert. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resiliance polyurethane foam 30mm thick having density 60kg/m³ and the back shall be made of metal pipe frame padded with high resiliance polyurethane foam 19mm thick having density 23kg/m³. The same shall be upholstered with leatherite tapestry 0.8mm thick 535GSM. The chair shall be supplied with metal frame and the understructure shall be supported on four legs made up of SS tubular pipe having size 30mm X 15mm with 1.6mm thick and the base of the seat shall be supported on 20mm X 10mm pipe frame. There shall be PPCP shoe provided at bottom to avoid scratches on the floor. The Seat size shall be 440±10 mm(D) X 460±10 mm(W) and back size shall be 400±10 mm(W) X 440±10 mm(H) from seat. Overall height shall be = 890±10 mm, overall depth = 570±10 mm.
19	Supplying & placing cafeteria table with an overall size 1500mm X 900mm X 750mm. The top of the table shall be made up of 12mm thick black toughened glass. The top profile shall be in rectangle shape with bevelled edges. The top shall be supported on SS 202 grade pipe frame with vacuum caps. The understructure shall have SS 202 grade pipe frame with size 30mm X 15mm. There shall be PPCP shoe provided at the base to avoid scratches on the floor.
20	Supplying and placing ergonomically designed, comfortable & aesthetically appealing Auditorium chair. The seat shall be made of 12mm thick hot pressed plywood with HR polyurethane foam upholstered with fire retardent fabric tapestry and the back shall be made of 15mm Plywood withPU Foam. The Chair shall have a seat sliding mechanism. The armrest shall be made of PP having cup holder. All metal components shall be powder coated in black colour with min 40-60 micron. The grouting plate shall be welded having size 170mm X 85mm X 3.5mm thick. Seat size shall be 470±10mm(W) X 440±10mm(D) and back size shall be 820±10mm (H) from seat X 540±10mm (W), & overall height = 1040±10mm.
21	Supplying and placing three seater sofa that shall be constructed from 12mm thick hot pressed commercial plywood. The sofa shall be supported on MS chrome plated and the frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back for comfort and lumbar support. The arm shall be provided MS chrome plated round pipe having Dia. 25.4mm. The seat and back shall be upholstered with leatherite tapestry 0.8±.1mm thick and 535 GSM. The under structure shall consist of MS chrome plated round pipe frame having Dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor. Overall width = 1650±10 mm, overall depth = 630±10 mm & overall height = 860±10 mm.
22	Supply , Installation , Testing and commissioning Providing and Fixing of Roller /Zebra Blind