Rc For Reju Of Old Shallow Tubewell, Pro Of Hose Pipe And Hiring Of Tractor Driven Burma With Supply And Installation Of Monoblock Pump Set For Alternative Arrangement Of Water Supply During Canal Closure Period 2022 Under Sub Div. Rural Loonkaran Rc For
Tender Value
42 Lakhs
Estimated cost
Bid Submission
24 Feb 2022
0 days left
EMD
84000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bikaner → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rc For Reju Of Old Shallow Tubewell, Pro Of Hose Pipe And Hiring Of Tractor Driven Burma With Supply And Installation Of Monoblock Pump Set For Alternative Arrangement Of Water Supply During Canal Closure Period 2022 Under Sub Div. Rural Loonkaran Rc For Reju Of Old Shallow Tubewell, Pro Of Hose Pipe And Hiring Of Tractor Driven Burma With Supply And Installation Of Monoblock Pump Set For Alternative Arrangement Of Water Supply During Canal Closure Period 2022 Under Sub Div. Rural Lksr
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980including making connection etc. 3 core 6.0 mm2 |
| 2 | ------do-------3 core 10.0 Sq.mm |
| 3 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 35sqmm 3.5 core |
| 4 | Supply & Installation of 3 phase ISI marked submersible motor pump set offive star rating by BEE and as per IS: 8034-2011 (pump) and IS 9283-2013 (motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.7.5 KW (10 HP) & head up to 120 mtr. |
| 5 | --------do------11 KW (15 HP) & head up to 120 mtr. |
| 6 | --------do------13 KW (17.5 HP) & head above 120 mtr. |
| 7 | Providing & Lowering in tubewell ISI marked GI Pipe “B\" (medium) class as per IS:1239 part I 2004 or amended up to date, threaded and double flanged (welded) on both ends and two number25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 65 mm dia |
| 8 | Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at syncronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected onC.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as perspecification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. |
| 9 | 3.7 KW (5.0 HP) |
| 10 | 5.5 KW (7.5 HP) |
| 11 | 7.5 KW (10 HP) |
| 12 | 9.3 KW (12.5 HP) |
| 13 | 11.0 KW (15 HP) |
| 14 | 15.0 KW (20.0 HP) |
| 15 | 18.5 KW (25.0 HP) |
| 16 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay,ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM).All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.Above 10 and upto 15 HP |
| 17 | -----do----- Above 15 HP |
| 18 | S & F of Star delta Starter with MCB,Main and Aux Contactor,O/L Relay, L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB with panel with all accessories with following rating - 15 KW |
| 19 | -----do---- 18.5 KW |
| 20 | Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesof approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitablesupport structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work. |
| 21 | 80 mm HW |
| 22 | 100 mm HW |
| 23 | 125 mm HW |
| 24 | 150 mm HW |
| 25 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding,lowering,laying,aligning,fixinginpositionatalllevel/ depths in trenches complete includingall taxes, material,labour, inside lining, outside coating, testingandcommissioning alongwithpipelineaspertechnicalspecifications anddirection of Engineer-in-charge. MS pipespecialsupto600mmdia (withminimum5mmthickness sheet) |
| 26 | Providing, installation, testing and commissioning of submersible dewatering pump set conforming to relevant IS codes and as per scope of work and Technical Specifications, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, impeller, pump and motor body. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard.The pump set shall be suitable for direct coupling, with suitable suction strainer etc. completein all respect as perspecification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions of one of the makes approved by Technical Committee. - 5 HP |
| 27 | Providing . 63 mm dia 15 M long reinforced rubber hose pipe conforming to IS : 636-1962, Part –A & ISI marked with Gun Metal male & female coupling wire wound with the pipe. |
| 28 | Supply of earth filled plastic cement bags stitched with sutll at the designated location/ places excluding the cost of EC bag but including the cost of sutll. |
| 29 | Labour charges for making coffer dam/Ring bundhs with earth filled EC bags including stitching alogh with transportation and placement at required locatins in water including all leads and lifts complete excluding the cost of EC bag but including the cost of sutll |
| 30 | Empty Cement (Polythene) Bags |
| 31 | LDPE Film 250 Micron |
| 32 | Dewatering with well point equipment with high pressure diesel operated suction pump including jetting depth 3 to 6m. as per site condition and making arrangement for proper outflow of pumped water etc. complete including labour and POL |
| 33 | De-Watering by tractor 35 to 45 HP fitted with local burma size 8\"-10 dia vertica/horizontal type complete with all accessories |
AI Tender Summary
Tender Timeline
Feb 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
Completed