Health And Family Welfare Department has published Providing Orthopedic Implants / Instruments Etc. In P.D.U.Hospital, Rajkot (Part 5)- Disposable Suture Shuttle With 45 Deg Angle Curved Left Preloaded With Monofilament #1 Comes With Thumb Wheel For Suture Placement,Disposable Suture Shuttle With 45 Deg A. Submission Date for this Tender is 10-03-2022. Orthopedic equipment Tenders in Jamnagar Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Title | DIA |
| 1 | Disposable suture shuttle with 45 deg angle curved left preloaded with monofilament #1 comes with thumb wheel for suture placement | - |
| 2 | Disposable suture shuttle with 45 deg angle curved right preloaded with monofilament #1 comes with thumb wheel for suture placement | - |
| 3 | Leg Holder & Pads: The Leg Holder should include a Table Clamp. Lateral Leg Post, Disposable leg holder Pads | - |
| 4 | Shoulder Limb Positioner: Should be battery operated shoulder limb positioner. It Should offer instantaneous shoulder repositioning within the sterile zone itself. It shoulde deliver exceptional control of abduction, rotation & forward flexion in beach ch | - |
| 5 | Arthroscopy Pump (Fluid Management System) : It should be Inflow/Outflow Pump. Easy to use, no calibration required. It should have a flow rate of not less than 2.5ltr/min. Automatic joint pressure maintaenance upto 150mmhg. Touch screen display. | - |
| 6 | Disposable Tube sets for inflow and outflow (box of 3). | - |
| 7 | Disposable Inflow and outflow tube set, forked suction (box of3) | - |
| 8 | Arthroscopy Radiofrequency Ablation System : Bipolar & Monopolar Radio Frequency ablation Generator console should perform plasma excision, pure coagulation, haemostasis & simultaneous soft tissue resection and ablation properties. It should have a voltag | - |
| 9 | Footswitch | - |
| 10 | Bipolar probe with suction, 90 deg | - |
| 11 | Bipolar probe with suction, 60 deg | - |
| 12 | Bipolar probe with suction, 40 deg | - |
| 13 | Monopolar probe without suction 90 deg | - |
| 14 | Monopolar Probe with suction 90 deg | - |
| 15 | Monopolar probe without suction 60 deg | - |
| 16 | Monopolar Probe with suction 60 deg | - |
| 17 | Monopolar probe without suction 60 deg, 2.0mm | - |
| 18 | Monopolar Probe with suction 60 deg, 2.0mm | - |
| 19 | Monopolar probe without suction 30 deg | - |
| 20 | Monopolar probe for small joint 60 deg | - |
| 21 | Monopolar probe for small joint 60 deg with Suction | - |
| 22 | Cartilage probe for Chondromalacia | - |
| 23 | Arthroscope 1.9mm X 30deg: | - |
| 24 | Direct View Arthroscope with field of view 80 deg, angle of view 30 deg, diameter 1.9mm, working length 67mm, with distal sapphire lens for improved scratch resistance | - |
| 25 | 2.2mm short cannula, with flow port | - |
| 26 | 2.2mm short trocar, sharp tip | - |
| 27 | 2.2mm short obturator, conical tip | - |
| 28 | Wrist Probe | - |
| 29 | Micro vector drill guide | - |
| 30 | Offset drill guide | - |
| 31 | K-wire guide, .045â€(1.1mm) | - |
| 32 | K-wire guide, .062â€(1.6mm) | - |
| 33 | K-wire guide, .125â€(3.2mm) | - |
| 34 | Microfracture Pick 90 deg, small | - |
| 35 | Microfracture Pick 65 deg, small | - |
| 36 | Microfracture Pick 40 deg, small | - |
| 37 | Micro Grasper, Straight | - |
| 38 | Micro Grasper, Up 10 deg | - |
| 39 | Micro Punch, Straight | - |
| 40 | Teardrop punch, right | - |
| 41 | Teardrop punch, left | - |
| 42 | Probe for Wrist | - |
| 43 | Sterilization Tray | - |
| 44 | Raptor Jr. Punch | - |
| 45 | Blunt Nose Jr Punch | - |
| 46 | Closed Currette | - |
| 47 | Osteotome | - |
| 48 | Probe for Foot & Ankle | - |
| 49 | Small Joint Grasper | - |
| 50 | Small Joint Grasper with Ratchet | - |
| 51 | Open Currette | - |
| 52 | 15 deg open currette, 4mm | - |
| 53 | 30 deg open currette, 2.5mm | - |
| 54 | 15 deg open currette, 2.5mm | - |
| 55 | 15 deg Anterior Lesion Currette, 2.5mm | - |
| 56 | Sterilization Tray | - |
| 57 | Microfracture Pick 90 deg, small | - |
| 58 | Microfracture Pick 65 deg, small | - |
| 59 | Microfracture Pick 40 deg, small | - |
| 60 | ACL Implants for Femoral Fixation: | - |
| 61 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 10mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 62 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 15mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 63 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 20mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 64 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 25mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 65 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 30mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 66 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 35mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 67 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 40mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 68 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 45mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 69 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 50mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 70 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 55mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 71 | Titanium Button(4mm X 12mm) with 2 accessory sutures for femoral fixation with loop size 60mm(Polyster Polyethylene Terepthalate) for ACL reconstruction | - |
| 72 | Titanium Button for 5mm Graft diameter with open end architecture at one end for smaller tunnels for ACL reconstruction | - |
| 73 | Titanium Button for 6mm Graft Diameter with open end architecture at one end for smaller tunnels for ACL reconstruction | - |
| 74 | Titanium Button for 7mm Graft Diameter with open end architecture at one end for smaller tunnels for ACL reconstruction | - |
| 75 | Titanium Button for 8mm Graft Diameter with open end architecture at one end for smaller tunnels for ACL reconstruction | - |
| 76 | Titanium Button for 9mm Graft Diameter with open end architecture at one end for smaller tunnels for ACL reconstruction | - |
| 77 | Titanium Button for 10mm Graft Diameter with open end architecture at one end for smaller tunnels for ACL reconstruction | - |
| 78 | Peek Interference screws for Tibial/femoral fixation in ACL reconstruction | - |
| 79 | Peek interference screw size 6mm x 20mm for ACL Reconstruction | - |
| 80 | Peek interference screw size 6mm x 25mm for ACL Reconstruction | - |
| 81 | Peek interference screw size 6mm x 25mm, reverse thread, for ACL Reconstruction | - |
| 82 | Peek interference screw size 7mm x 20mm for ACL Reconstruction | - |
| 83 | Peek interference screw size 7mm x 25mm for ACL Reconstruction | - |
| 84 | Peek interference screw size 7mm x 25mm, reverse thread, for ACL Reconstruction | - |
| 85 | Peek interference screw size 7mm x 30mm for ACL Reconstruction | - |
| 86 | Peek interference screw size 8mm x 20mm for ACL Reconstruction | - |
| 87 | Peek interference screw size 8mm x 25mm for ACL Reconstruction | - |
| 88 | Peek interference screw size 8mm x 25mm, reverse thread, for ACL Reconstruction | - |
| 89 | Peek interference screw size 8mm x 30mm for ACL Reconstruction | - |
| 90 | Peek interference screw size 8mm x 35mm for ACL Reconstruction | - |
| 91 | Peek interference screw size 9mm x 20mm for ACL Reconstruction | - |
| 92 | Peek interference screw size 9mm x 25mm for ACL Reconstruction | - |
| 93 | Peek interference screw size 9mm x 30mm for ACL Reconstruction | - |
| 94 | Peek interference screw size 9mm x 35mm for ACL Reconstruction | - |
| 95 | Peek interference screw size 10mm x 20mm for ACL Reconstruction | - |
| 96 | Peek interference screw size 10mm x 25mm for ACL Reconstruction | - |
| 97 | Peek interference screw size 10mm x 30mm for ACL Reconstruction | - |
| 98 | Peek interference screw size 10mm x 35mm for ACL Reconstruction | - |
| 99 | Peek interference screw size 11mm x 25mm for ACL Reconstruction | - |
| 100 | Peek interference screw size 11mm x 30mm for ACL Reconstruction | - |
| 101 | Peek interference screw size 11mm x 35mm for ACL Reconstruction | - |
| 102 | Peek interference screw size 12mm x 35mm for ACL Reconstruction | - |
| 103 | PLLA HA Screws for Tibial/Femoral fixation in ACL | - |
| 104 | Interference Bio screw size 6mm x 20mm (75% PLLA & 25% HA) | - |
| 105 | Interference Bio screw size 6mm x 25mm (75% PLLA & 25% HA) | - |
| 106 | Interference Bio screw size 6mm x 25mm, reverse thread, (75% PLLA & 25% HA) | - |
| 107 | Interference Bio screw size 7mm x 20mm (75% PLLA & 25% HA) | - |
| 108 | Interference Bio screw size 7mm x 25mm (75% PLLA & 25% HA) | - |
| 109 | Interference Bio screw size 7mm x 25mm, reverse thread, (75% PLLA & 25% HA) | - |
| 110 | Interference Bio screw size 7mm x 30mm (75% PLLA & 25% HA) | - |
| 111 | Interference Bio screw size 8mm x 20mm (75% PLLA & 25% HA) | - |
| 112 | Interference Bio screw size 8mm x 25mm (75% PLLA & 25% HA) | - |
| 113 | Interference Bio screw size 8mm x 25mm, reverse thread, (75% PLLA & 25% HA) | - |
| 114 | Interference Bio screw size 8mm x 30mm (75% PLLA & 25% HA) | - |
| 115 | Interference Bio screw size 8mm x 35mm (75% PLLA & 25% HA) | - |
| 116 | Interference Bio screw size 9mm x 20mm (75% PLLA & 25% HA) | - |
| 117 | Interference Bio screw size 9mm x 25mm (75% PLLA & 25% HA) | - |
| 118 | Interference Bio screw size 9mm x 30mm (75% PLLA & 25% HA) | - |
| 119 | Interference Bio screw size 9mm x 35mm (75% PLLA & 25% HA) | - |
| 120 | Interference Bio screw size 10mm x 20mm (75% PLLA & 25% HA) | - |
| 121 | Interference Bio screw size 10mm x 25mm (75% PLLA & 25% HA) | - |
| 122 | Interference Bio screw size 10mm x 30mm (75% PLLA & 25% HA) | - |
| 123 | Interference Bio screw size 10mm x 35mm (75% PLLA & 25% HA) | - |
| 124 | Interference Bio screw size 11mm x 25mm (75% PLLA & 25% HA) | - |
| 125 | Interference Bio screw size 11mm x 30mm (75% PLLA & 25% HA) | - |
| 126 | Interference Bio screw size 11mm x 35mm (75% PLLA & 25% HA) | - |
| 127 | Interference Bio screw size 12mm x 35mm (75% PLLA & 25% HA) | - |
| 128 | Meniscal Repair Implant for ALL Inside Technique:All Inside Meniscal repair system with pre knotted 2 peek implants mounted on a straight rigid needle and can be deployed in the meniscus at any angle. It should have an inbuilt depth penetration limiter to | - |
| 129 | Meniscal Repair Implant for ALL Inside Technique:All Inside Meniscal repair system with pre knotted 2 peek implants mounted on a curved rigid needle and can be deployed in the meniscus at any angle. It should have an inbuilt depth penetration limiter to p | - |
| 130 | Meniscal Repair Implant for ALL Inside Technique:All Inside Meniscal repair system with pre knotted 2 peek implants mounted on a reverse curved rigid needle and can be deployed in the meniscus at any angle. It should have an inbuilt depth penetration limi | - |
| 131 | Meniscal Repair Implant for ALL Inside Technique:Knot pusher/cutter for the left behind suture in the all inside meniscal repair system | - |
| 132 | Suture Anchors for Bankart Repair : 2.8mm titanium screw in anchors with high & low threads design, preloaded with single ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair | - |
| 133 | Suture Anchors for Bankart Repair : 3.5mm titanium screw in anchors with high & low threads design, preloaded with double ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair | - |
| 134 | Suture Anchors for Bankart Repair : 2.3mm Peek Tap in anchors, preloaded with single ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair | - |
| 135 | Suture Anchors for Bankart Repair : 2.3mm Bioabsorbable(75% PLLA & 25% HA) Tap in anchors, preloaded with single ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair | - |
| 136 | Suture Anchors for Bankart Repair : 2.9mm Bioabsorbable(75% PLLA & 25% HA) Tap in anchors, preloaded with double ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair | - |
| 137 | Suture Anchors for Rotator cuff repair : 5.0mm titanium screw in anchors with high & low threads design, preloaded with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 138 | Suture Anchors for Rotator cuff repair : 6.5mm titanium screw in anchors with high & low threads design, preloaded with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 139 | Suture Anchors for Rotator cuff repair : 4.5mm Peek screw in anchors, preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 140 | Suture Anchors for Rotator cuff repair : 5.5mm Peek screw in anchors, preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 141 | Suture Anchors for Rotator cuff repair : 6.5mm Peek screw in anchors, preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 142 | Suture Anchors for Rotator cuff repair : 5.5mm Peek screw in anchors, preloaded at distal end of the anchor with triple ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 143 | 4.5mm Bioabsorbable(75% PLLA & 25% HA) screw in anchors, preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff Suture Anchors for Rotator cuff repair : repair | - |
| 144 | Suture Anchors for Rotator cuff repair : 5.5mm Bioabsorbable(75% PLLA & 25% HA), screw in preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 145 | Suture Anchors for Rotator cuff repair : 6.5mm Bioabsorbable(75% PLLA & 25% HA), screw in preloaded at distal end of the anchor with double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 146 | Suture Anchors for Rotator cuff repair : 5.5mm Bioabsorbable(75% PLLA & 25% HA), screw in preloaded at distal end of the anchor with triple ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair | - |
| 147 | - | - |
| 148 | - | - |
| 149 | - | - |
| 150 | 4.5mm Peek screw in anchors with open architecture for bone integration in between the anchor material, preloaded at distal end of the anchor with double ultrahigh molecular weight Suture Anchors for Rotator cuff repair : Polyethylene braided fiber for rotator cuff repair | - |
| 151 | 5.5mm Peek screw in anchors with open architecture for bone integration in between the anchor mateiral, preloaded at distal end of the anchor with double ultrahigh molecular weight Suture Anchors for Rotator cuff repair : Polyethylene braided fiber for rotator cuff repair | - |
| 152 | 4.5mmpeek tap in Knotless anchor for lateral row with offset barbed geometry threads for high pull out and easy insertion. It should come with a feature of readjusting the suture Suture Anchors for Rotator cuff repair : tensioning of the medial row anchor after anchor insertion | - |
| 153 | 5.5mmpeek tap in Knotless anchor for lateral row with offset barbed geometry threads for high pull out and easy insertion. It should come with a feature of readjusting the suture Suture Anchors for Rotator cuff repair : tensioning of the medial row anchor after anchor insertion | - |
| 154 | Arthroscope 4mm X 30deg:- Direct View Autoclavable Arthroscope, Field of view: 115 deg, Angle of view: 30 deg ,Diameter: 4mm , Working length: 278mm, Incorporated fibre optic light transmission, Sapphire lens for improve scratch resistance, Light post on opposite side of the direction of view with a j-lock fixation & stopcock | - |
| 155 | Arthroscope 4mm X 70deg:- Direct View Autoclavable Arthroscope, Field of view: 115 deg, Angle of view: 70 deg ,Diameter: 4mm , Working length: 280mm, Incorporated fibre optic light transmission, Sapphire lens for improve scratch resistance, Light post on opposite side of the direction of view with a j-lock fixation & stopcock | - |
| 156 | 6.0mm, high flow diagnostic cannula, double valve, fully rotatable cannula with fenestrated tip for Hip Arthroscopy | - |
| 157 | 4.5mm conical obturator to fit in 6.0mm cannula for Hip Arthroscopy | - |
| 158 | Hip Guide | - |
| 159 | Hip Guide Bullet | - |
| 160 | 4.5mm Hip Access Cannula | - |
| 161 | 5.0mm Hip Access Cannula | - |
| 162 | 4.5mm cannulated obturator with Derlin handle | - |
| 163 | 5.0mm cannulated obturator with Derlin handle | - |
| 164 | Sterilization Tray | - |
| 165 | Extra Long Disposable Arthroscopy needle (17gauge, 9" long) | - |
| 166 | 3.0mm Cannula Flow | - |
| 167 | Slotted Cannula with working length of 6.2" | - |
| 168 | 4.5mm Connical Obturator | - |
| 169 | 4.5mm Cannulated Obturator | - |
| 170 | 5.0mm Conical Obturator | - |
| 171 | 5.0mm Cannulated obturator | - |
| 172 | 5.5mm Conical obturator | - |
| 173 | 5.5mm Cannulated Obturator | - |
| 174 | Obturator for 3.0mm Cannula | - |
| 175 | 3.0mm Long hip probe | - |
| 176 | 4.3mm Switching Stick | - |
| 177 | Reusable Banana Blade Knife | - |
| 178 | Reusable Cannulated Banana Blade Knife | - |
| 179 | Reusable Handle and wrench | - |
| 180 | Rotary punch, 2.2mm left, loop handle with extended length | - |
| 181 | Rotary Punch 2.2mm right, loop handle with extended length | - |
| 182 | Scoop punch 1.5mm upbiter with extended length | - |
| 183 | Duckling Punch Upbiter with extended length | - |
| 184 | Duckling Punch Upsweft with extended length | - |
| 185 | Narrowling upbiter with extended length | - |
| 186 | Narrowline upbiter, Curved Right with extended length | - |
| 187 | Backbiter punch right with extended length | - |
| 188 | Backbiter punch left with extended length | - |
| 189 | Alligator Max Grasper with extended length | - |
| 190 | Cupped Grasper 3.4mm with extended length | - |
| 191 | Loosebody Grasper with extended length | - |
| 192 | Extra Long Chondral pick with 30 deg angle | - |
| 193 | Extra Long Chondral pick with 45 deg angle | - |
| 194 | Extra Long Chondral pick with 60 deg angle | - |
| 195 | Extra Long open currette, 4.75mm | - |
| 196 | Extra Long open currette, reverse cut, 6.0mm | - |
| 197 | Extra Long suture cutter | - |
| 198 | Reusable banana blade | - |
| 199 | Extra Long elevator | - |
| 200 | Extra Long Rasp | - |
| 201 | Extra Long Tissue Penetrator, straight | - |
| 202 | Extra Long Arthro Round | - |
| 203 | Crochet Hook | - |
| 204 | Sterilization Tray | - |
| 205 | Reusable Obturator 7.0mm X 110mm | - |
| 206 | Reusable Obturator 8.5mm X 110mm | - |
| 207 | Reusable Obturator 7.0mm X 90mm | - |
| 208 | Reusable Obturator 8.5mm X 90mm | - |
| 209 | Pelvic C-Clamp Set | - |
| 210 | Pelvic C-Clamp Set | - |
| 211 | Pelvic C-Clamp Set : Tray for Instruments | - |
| 212 | Pelvic C-Clamp Set : Guide Handle | - |
| 213 | Pelvic C-Clamp Set : Pelvic C-Clamp, | - |
| 214 | Pelvic C-Clamp Set : Pelvic C-Clamp Set : Ratchet Wrench for Nut, Hexagonal, 11.0mm ( 2 Units ) Made of Stainless steel | - |
| 215 | Pelvic C-Clamp Set : Wire Cutter, Large, With Multiplication, Length 220mm Made of Stainless steel | - |
| 216 | Pelvic C-Clamp Set : Socket Wrench Ø 11.0mm With Hammer Made of Stainless steel | - |
| 217 | Pelvic C-Clamp Set : Nail for Pelvic C-Clamp, Cannulated, Short, Length 190mm, Stainless Steel ( 2 Units) Made of Stainless steel | - |
| 218 | Pelvic C-Clamp Set : Nail for Pelvic C-Clamp, Cannulated, Long, Length 210mm, Stainless Steel (2 Units ) Made of Stainless steel | - |
| 219 | Pelvic C-Clamp Set : K - Wire Ø 2.5mm With Trocar Tip, Length 280mm, Stainless Steel, Pack of 10 Units Made of Stainless steel | - |
| 220 | Pelvic C-Clamp Set : Pliers, Flat Nosed Made of Stainless steel Grade | - |
| 221 | Pelvic C-Clamp Set : Cap for Carbon Fiber Rods Ø 8.0mm Made of Stainless steel Grade - | - |
| 222 | Collinear Reduction Clamp Set: Insert for Collinear Reduction Clamp Made of Stainless steel | - |
| 223 | Collinear Reduction Clamp Set: Collinear Reduction Clamp With Sliding Mechanism Made of Stainless steel - | - |
| 224 | Collinear Reduction Clamp Set: Combination Wrench Ø 8.0mm Made of Stainless steel - | - |
| 225 | Collinear Reduction Clamp Set: Hohmann-Shape Arm for Collinear Reduction Clamp Made of Stainless steel - | - |
| 226 | Collinear Reduction Clamp Set: Pelvic Arm for Collinear Reduction Clamp Made of Stainless steel - | - |
| 227 | Collinear Reduction Clamp Set: Percutaneous Arm for Collinear Reduction Clamp Made of Stainless steel - | - |
| 228 | Collinear Reduction Clamp Set: Bone Hook - Shape Arm for Collinesr Reduction Clamp Made of Stainless steel - | - |
| 229 | Collinear Reduction Clamp Set: Combination Wrench Ø 13.0mm Made of Stainless steel - | - |
| 230 | Collinear Reduction Clamp Set: K-Wire Ø 2.6mm with Spade Point Tip, Length 500mm ( 5 Units ) Made of Stainless steel - | - |
| 231 | Collinear Reduction Clamp Set: Spiked Disc for Pelvic Reduction Forceps Made of Stainless steel - | - |
| 232 | Reduction Instruments, Large : Tray for Reduction Handles Large, Toothed & Rounded Made of Stainless steel - | - |
| 233 | Reduction Instruments, Large : Lid for Modular Tray Made of Stainless steel - | - |
| 234 | Reduction Instruments, Large : Guide Wire Ø 1.6mm with Threaded Tip with Trocar, Length 410mm, Stainless Steel ( 4 Units ) Made of Stainless steel - | - |
| 235 | Reduction Instruments, Large : Guide Wire Ø 2.8mm with Threaded Tip with Trocar, Length 300mm, Stainless Steel ( 4 Units ) Made of Stainless steel - | - |
| 236 | Reduction Instruments, Large : Allen Key , Angled, Ø 3.5mm Made of Stainless steel - | - |
| 237 | Reduction Instruments, Large : Combination Wrench Ø 11.0mm Made of Stainless steel - | - |
| 238 | Reduction Instruments, Large : Reduction Handle, Toothed for Threaded Rod Ø 5.0mm ( 2 Units ) Made of Stainless steel - | - |
| 239 | Reduction Instruments, Large : Reduction Handle, Rounded for Guide Wire Ø 2.8mm ( 2 Units ) Made of Stainless steel - | - |
| 240 | Reduction Instruments, Large : Protection Sleeve, 11.0 Slotted Made of Stainless steel - | - |
| 241 | Reduction Instruments, Large : Drill Sleeve, 11.0/2.8 Made of Stainless steel - | - |
| 242 | Reduction Instruments, Large : Drill Sleeve, 5.0/1.6 Made of Stainless steel - | - |
| 243 | Reduction Instruments, Large : Drill Sleeve, 11.0/5.0 Made of Stainless steel - | - |
| 244 | Reduction Instruments, Large : Tap, Ø 5.0/1.6mm, Cannulated, Self Drilling, Length 195mm, Stainless Steel Made of Stainless steel - | - |
| 245 | Reduction Instruments, Large : Adjusting Nut for Threaded Rod Ø 5.0mm, Stainless Steel (2 Units ) Made of Stainless steel - | - |
| 246 | Reduction Instruments, Large : Threaded Rod, Ø 5.0mm with Self Drilling Tip, Length 380mm, Stainless Steel (4 Units) Made of Stainless steel - | - |
| 247 | Reduction Instruments, Large : Threaded Rod, Ø 5.0/1.6mm, Blunt Tip, Cannulated, Length 335mm, Stainless Steel (2 Units) Made of Stainless steel - | - |
| 248 | Reduction Instruments, Large : Combination Clamp, Clip-on Self Holding ( 2 Units ) Made of Stainless steel - | - |
| 249 | Reduction Instruments, Large : Carbon Fibre Rod, Ø 11.0mm, Length 250mm Made of Stainless steel - | - |
| 250 | Reduction Instruments, Large : Carbon Fibre Rod, Ø 11.0mm, Length 350mm Made of Stainless steel - | - |
| 251 | Reduction Instruments, Large : Peri Articular Reduction Forceps, Large with Spherical Tip Made of Stainless steel - | - |
| 252 | Reduction Instruments, Small : Tray for Reduction Handles Small, Toothed & Rounded Made of Stainless steel - | - |
| 253 | Reduction Instruments, Small : Lid for Modular Tray Made of Stainless steel - | - |
| 254 | Reduction Instruments, Small : Guide Wire Ø 1.6mm with Threaded Tip with Trocar, Length 150mm, Stainless Steel ( 4 Units ) Made of Stainless steel - | - |
| 255 | Reduction Instruments, Small : Allen Key , Angled, Ø 3.5mm Made of Stainless steel - | - |
| 256 | Reduction Instruments, Small : Allen Key Small , Angled, Ø 2.5mm Made of Stainless steel - | - |
| 257 | Reduction Instruments, Small : Reduction Handle, Toothed for Threaded Rod Ø 3.0mm ( 2 Units ) Made of Stainless steel - | - |
| 258 | Reduction Instruments, Small : Reduction Handle, Rounded for Guide Wire Ø 1.6mm ( 2 Units ) Made of Stainless steel - | - |
| 259 | Reduction Instruments, Small : Protection Sleeve, 8.0 Slotted Made of Stainless steel - | - |
| 260 | Reduction Instruments, Small : Drill Sleeve, 8.0/1.6 Made of Stainless steel - | - |
| 261 | Reduction Instruments, Small : Drill Sleeve, 8.0/3.0 Made of Stainless steel - | - |
| 262 | Reduction Instruments, Small : Adjusting Nut for Threaded Rod Ø 3.0mm, Stainless Steel (2 Units ) Made of Stainless steel - | - |
| 263 | Reduction Instruments, Small : Threaded Rod, Ø 3.0mm with Self Drilling Tip, Length 270mm, Stainless Steel (4 Units) Made of Stainless steel - | - |
| 264 | Reduction Instruments, Small : Combination Clamp Medium, Clip-on Self Holding ( 2 Units ) Made of Stainless steel - | - |
| 265 | Reduction Instruments, Small : Carbon Fibre Rod, Ø 8.0mm, Length 160mm Made of Stainless steel - | - |
| 266 | Reduction Instruments, Small : Carbon Fibre Rod, Ø 8.0mm, Length 240mm Made of Stainless steel - | - |
| 267 | Reduction Instruments, Small : Peri Articular Reduction Forceps, Medium with Spherical Tip Made of Stainless steel - | - |
| 268 | Plate Insertion Instruments : Insert for Instrument Set for Minimally Invasive Plate Insertion Made of Stainless steel - | - |
| 269 | Plate Insertion Instruments : Combination Wrench Ø 8.0mm Made of Stainless steel - | - |
| 270 | Plate Insertion Instruments : Combination Wrench Ø 11.0mm Made of Stainless steel - | - |
| 271 | Plate Insertion Instruments : Soft Tissue Retractor, Small, Extendible Made of Stainless steel - | - |
| 272 | Plate Insertion Instruments : Soft Tissue Retractor, Large, Extendible Made of Stainless steel - | - |
| 273 | Plate Insertion Instruments : Blade, Long, Small, for Soft Tissue Retractor, Small, Extendible Made of Stainless steel - | - |
| 274 | Plate Insertion Instruments : Blade, Long, Large, for Soft Tissue Retractor, Large, Extendible Made of Stainless steel - | - |
| 275 | Plate Insertion Instruments : Plate Holder for MIPO Made of Stainless steel - | - |
| 276 | Plate Insertion Instruments : Clamping Foot for LCP 3.5 & LC - DCP 3.5 Made of Stainless steel - | - |
| 277 | Plate Insertion Instruments : Clamping Foot for Narrow LCP4.5/5.0 & for Narrow LC- DCP4.5 Made of Stainless steel - | - |
| 278 | Plate Insertion Instruments : Clamping Foot for Broad LCP4.5/5.0 & for Broad LC- DCP4.5 Made of Stainless steel - | - |
| 279 | Plate Insertion Instruments : Connecting Screw for Plate Holder for MIPO Made of Stainless steel - | - |
| 280 | Plate Insertion Instruments : Connecting Screw for LCP 3.5 Made of Stainless steel - | - |
| 281 | Plate Insertion Instruments : Adjusting Nut for Connecting Screw for LCP 3.5 & 4.5/5.0 Made of Stainless steel - | - |
| 282 | Plate Insertion Instruments : Connecting Screw for LCP 4.5/5.0 Made of Stainless steel - | - |
| 283 | Shoulder Instruments for Shoulder Surgery : Vario Case for General Shoulder Instruments, With Lid Made of Stainless steel - | - |
| 284 | Shoulder Instruments for Shoulder Surgery : Delta Retractor Made of Stainless steel - | - |
| 285 | Shoulder Instruments for Shoulder Surgery : Delta Retractor, Pointed Made of Stainless steel - | - |
| 286 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Delta Shaped Made of Stainless steel - | - |
| 287 | Shoulder Instruments for Shoulder Surgery : Ring Retractor Made of Stainless steel - | - |
| 288 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Narrow Made of Stainless steel - | - |
| 289 | Shoulder Instruments for Shoulder Surgery : Bone Retractor, Humeral Head Made of Stainless steel - | - |
| 290 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Drop Shaped Made of Stainless steel - | - |
| 291 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Drop Shaped, Narrow Made of Stainless steel - | - |
| 292 | Shoulder Instruments for Shoulder Surgery : Shoulder Spreader, Left Bend Made of Stainless steel - | - |
| 293 | Shoulder Instruments for Shoulder Surgery : Shoulder Spreader, Right Bend Made of Stainless steel - | - |
| 294 | Hohmann Retractor Holder Set : Holder for Hohmann Retractor Made of Stainless steel - | - |
| 295 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, 30°, Curved, Left Made of Stainless steel - | - |
| 296 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, 30°, Curved, Right Made of Stainless steel - | - |
| 297 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, Length 220mm Made of Stainless steel - | - |
| 298 | Hohmann Retractor Holder Set : Bone Lever, Width 18mm, Length 235mm Made of Stainless steel - | - |
| 299 | Hohmann Retractor Holder Set : Bone Lever, Width 43mm, Length 240mm Made of Stainless steel - | - |
| 300 | Hohmann Retractor Holder Set : Bone Lever, Width 70mm, Length 240mm Made of Stainless steel - | - |
| 301 | Hohmann Retractor Holder Set : Bone Lever, Width 43mm, Length 235mm Made of Stainless steel - | - |
| 302 | Hohmann Retractor Holder Set : Bone Lever, Width 22mm, Length 250mm Made of Stainless steel - | - |
| 303 | Hohmann Retractor Holder Set : Bone Lever, Width 24mm, Length 270mm Made of Stainless steel - | - |
| 304 | Intramedullary Reaming System : Vario Case for Intramedullary Reaming System, With Lid, Module & 2 Inserts Made of Stainless steel - | - |
| 305 | Intramedullary Reaming System : T-Handle with Quick Coupling, Length 85mm Made of Stainless steel - | - |
| 306 | Intramedullary Reaming System : Holding Forceps for Reaming Rod 2.5mm Made of Stainless steel - | - |
| 307 | Intramedullary Reaming System : Removing Tool for Reamer Head Made of Stainless steel - | - |
| 308 | Intramedullary Reaming System : Reaming Rod, Ø 2.5mm , Length 1150mm,3.5mm Olive ( 2 Units ) Made of Stainless steel - | - |
| 309 | Intramedullary Reaming System : Flexible Shaft, Ø 7.0mm, Reaming Depth to 470mm Made of Stainless steel - | - |
| 310 | Intramedullary Reaming System : Cleaning Brush for 3.6mm Flexible Shaft, Length 600mm Made of Stainless steel - | - |
| 311 | Intramedullary Reaming System : Reduction Head, Straight Made of Stainless steel - | - |
| 312 | Intramedullary Reaming System : Reduction Head, Displacement 2.5mm Made of Stainless steel - | - |
| 313 | Intramedullary Reaming System : Reamer Head, Ø 8.5mm Made of Stainless steel - | - |
| 314 | Intramedullary Reaming System : Reamer Head, Ø 9.0mm Made of Stainless steel - | - |
| 315 | Intramedullary Reaming System : Reamer Head, Ø 9.5mm Made of Stainless steel - | - |
| 316 | Intramedullary Reaming System : Reamer Head, Ø 10.0mm Made of Stainless steel - | - |
| 317 | Intramedullary Reaming System : Reamer Head, Ø 10.5mm Made of Stainless steel - | - |
| 318 | Intramedullary Reaming System : Reamer Head, Ø 11.0mm Made of Stainless steel - | - |
| 319 | Intramedullary Reaming System : Reamer Head, Ø 11.5mm Made of Stainless steel - | - |
| 320 | Intramedullary Reaming System : Reamer Head, Ø 12.0mm Made of Stainless steel - | - |
| 321 | Intramedullary Reaming System : Reamer Head, Ø 12.5mm Made of Stainless steel - | - |
| 322 | Intramedullary Reaming System : Reamer Head, Ø 13.0mm Made of Stainless steel - | - |
| 323 | Instrument Set for the Removal of Damaged or Broken Screw : Extraction Module for 3.5mm / 4.0mm / 4.5mm Screw Made of Stainless steel - | - |
| 324 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, T25, Length 100mm Made of Stainless steel - | - |
| 325 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 3.5/4.0mm Screws Made of Stainless steel - | - |
| 326 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 3.5/4.0mm Screws Made of Stainless steel - | - |
| 327 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 3.5mm & 4.0mm Made of Stainless steel - | - |
| 328 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 4.5mm Screws Made of Stainless steel - | - |
| 329 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 4.5mm Screws Made of Stainless steel - | - |
| 330 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 4.5mm & 5.0mm Made of Stainless steel - | - |
| 331 | Instrument Set for the Removal of Damaged or Broken Screw : Conical Extraction Screw for 2.7mm / 3.5mm / 4.0mm Screw Made of Stainless steel - | - |
| 332 | Instrument Set for the Removal of Damaged or Broken Screw : Extraction Screw for 3.5mm Screw Made of Stainless steel - | - |
| 333 | Instrument Set for the Removal of Damaged or Broken Screw : Conical Extraction Screw for 4.5mm / 6.5mm Screw ( 2 Units) Made of Stainless steel - | - |
| 334 | Instrument Set for the Removal of Damaged or Broken Screw : T - Handle with Quick Coupling Made of Stainless steel - | - |
| 335 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Small, Ø 2.5mm Made of Stainless steel - | - |
| 336 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Stardrive, 3.5, T15, Self Holding, for AO/ASIF Quick Coupling Made of Stainless steel - | - |
| 337 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Large, Ø 3.5mm Made of Stainless steel - | - |
| 338 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Hexagonal Head 4mm, Length 100mm Made of Stainless steel - | - |
| 339 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, T40, Length 100mm Made of Stainless steel - | - |
| 340 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 5.0 / 6.0 / 6.5 / 7.0mm Screws Made of Stainless steel - | - |
| 341 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 5.0 / 6.0 / 6.5 / 7.0mm Screws Made of Stainless steel - | - |
| 342 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 6.0 / 6.5 / 7.0mm Made of Stainless steel - | - |
| 343 | Instrument Set for the Removal of Damaged or Broken Screw : Anodized, Alluminium Plate with Application Diagram for Instrument set for the Removal of Damaged or Broken Screw Made of Stainless steel - | - |
| 344 | Instrument Set for the Removal of Damaged or Broken Screw : Sharp Hook, Length 155mm Made of Stainless steel - | - |
| 345 | Instrument Set for the Removal of Damaged or Broken Screw : Pliers for Screw Removal, Length 205mm Made of Stainless steel - | - |
| 346 | Instrument Set for the Removal of Damaged or Broken Screw : Gouge, Width 10mm Made of Stainless steel - | - |
| 347 | Femoral Distractor Set : Sterilizing Tray for Instrument Set for Large Distractor Made of Stainless steel - | - |
| 348 | Femoral Distractor Set : Drill Bit, 3.5mm dia., L 195/170mm for quick coupling (2 Units) Made of Stainless steel - | - |
| 349 | Femoral Distractor Set : Drill Sleeve 5.0/3.5, long Made of Stainless steel - | - |
| 350 | Femoral Distractor Set : Drill Sleeve 6.0/5.0, long Made of Stainless steel - | - |
