Military Engineer Services-MES has published Cwe / Ggn / Gt-46 / 2021-22 Certain Repairs To Flooring, Plastering, Joinery, Saintary Fittings And Water Supply Including Misc Repair Works To Bldg In Nts Area At Afssr Under Ge Af Gurgaon Certain Repairs To Flooring, Plastering, Joinery,. Submission Date for this Tender is 19-03-2022. Civil Work Tenders in Gurugram Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Mar-2022 | Corr to GT-46 | Other | 12-03-2022 |
| 2 | 12-Mar-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-03-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, including removal of rubbish outside MoD land, complete all as specified and as directed |
| 3 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and as directed |
| 4 | Dismantling of brick masonry built in cement mortar as in drain etc., complete all as specified and as directed. |
| 5 | Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and as directed. |
| 6 | Taking down Chowkhats with shutters (without taking of shutter from the frame) of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM1:4 & finished with similar specification as exists, complete all as specified and as directed. |
| 7 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed. |
| 8 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. |
| 9 | Dismantling of cast iron or reinforced concrete drain pipes 100 mm bore, jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 10 | M&L for Cement concrete (1:4:8) type D-2 (Using 40 mm graded stone aggregate)in foundations, filling and mass concrete etc complete all as specified and directed. |
| 11 | M&L for Concrete bed (1:3:6) type C2 (using 40 mm graded crushed stone aggregate)to drain pipes 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed. |
| 12 | S&F Reinforced concrete pipes 150 mm bore, class NP2, laid and jointed complete with collars all as specified and directed. |
| 13 | M&L for brick masonry with sub class "B", old size bricks straight or curved on plan exceeding 6m mean radius, built in Cement Mortar (1:4) complete all as specified and as directed. |
| 14 | M&L Cement concrete type B-1 (1:2:4) with (using 20 mm graded stone aggregate in surface channels and drains etc complete all as specified and directed. |
| 15 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as incoping, bed block, kneels, apex stones etcincluding weathering slightly rounded or chamfered including form work complete all as specified and as directed |
| 16 | M&Lfor pre cast reinforced cement concrete 1:2:4 type B1 with using 20 mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 17 | M&L for Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 19 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and as directed. |
| 20 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed. |
| 21 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 22 | M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and as directed. Note: The rate quoted by contractor shalldeemed to be included necessary scaffolding and form work as required at site. |
| 23 | Supply only integral waterproofing compound complete all as specified and as directed. |
| 24 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 25 | M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paintwith approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 26 | M&L forPCC (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in floors finished even & rough to receive the bedding mortar, omplete all as specified and as directed. |
| 27 | M&L for first quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 28 | M&L for first quality, Non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 29 | All as per item Nos 27 & 28 hereinbefore but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar (1:4) as backing coat complete all as specified and as directed. |
| 30 | M&L for first quality, virified ceramic tiles (any shade) 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 31 | All as per item No 30 hereinbefore but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar (1:4) as backing coat complete all as specified and as directed. |
| 32 | M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with shade of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), complete all as specified and as directed. Note :- Pattern of the tiles shall be approved by GE at the time of execution. |
| 33 | M&L for 18-20mm thick granite ( of any type) work (table rubbed and polished ) in cooking plateform, shelvesand the like, over and including 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including taking out the old broken stone complete all as specified and as directed. |
| 34 | M&L for 75 mm thick, plain cement concrete (1:3:6), type C-2, (using 40 mm graded mechanically crushed stone aggregates), laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and as directed. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. |
| 35 | M&L for 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishingincl dismantling damaged stone slab of any description complete all as specified and as directed. |
| 36 | M&L for, machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 37 | S&F in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule ccomplete all as specified and as directed. |
| 38 | S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified and as directed. |
| 39 | S&F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed. |
| 40 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed. |
| 41 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 42 | S&F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed. |
| 43 | S&F VitreousChina wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), fixed in repairs, including connection to waste pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed. |
| 44 | S&F in repair plastic water closet seat cover of any color closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and as directed. |
| 45 | S&F in repair chromium plated brassshower rose 125 mm size with orwitout swivel joints including fxing with 15 mm bore pipe, fixed in repairs, complete all as specified and as directed. |
| 46 | S&F in repair towel rail 600 mm long, 20 mm dia, ‘D’ type, brass, chromium plated, fixedto walls with screws and plastic cleats, complete all as specified and as directed. |
| 47 | S&F in repairs vitreous china squating pan, "Orissa"pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron "P" or "S" trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and as directed. |
| 48 | S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and as directed. |
| 49 | S&F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 50 | S&F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 51 | Taking down cast iron soil, waste and vent pipes in any position (75/100mm dia), including cleaning for re-fixing or removal to store or for credit, complete all as specified and as directed. |
| 52 | M&L for 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and as directed.. Note : Extra over for leadjoints shall be measured and paid separately. |
| 53 | M&L for, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and as directed.. Note : Extra over for leadjoints shall be measured and paid separately. |
| 54 | S&F in repairs cast iron bends75mm bore, diminishing pieces or tapers fitted with oval access door ISI marked complete all as specified and as directed. |
| 55 | S&F in repairs cast iron bends (any radius) with duck"s foot or heel rest 100mm bore, ISI marked complete all as specified and as directed. |
| 56 | S&F in repairs 75mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel brances with oval access doors complete all as specified and as directed. |
| 57 | S&F in repairs 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel brances with oval access doors complete all as specified and as directed. |
| 58 | M&L for extra over for lead joints provided in lieu of cement joints for 75 mm dia cast iron pipes and fittings, complete all as specified and as directed. |
| 59 | M&L, extra over for lead joints provided in lieu of cement joints for 100mm dia cast iron pipes and fittings, complete all as specified and as directed. |
| 60 | S&F in repair cast iron floor trap, 75 mm dia of out let, ISI marked, with CP grating including jointing to waste pipe fixed in cement concrete(1:2:4) type B-1,complete all as specified and as directed. |
| 61 | S&F in repairs 600 x 450mm bevelled edge Mirror of selected quality glass,fancy type mounted on 6mm thick AC building board or commercial plywood with wooden frame all round and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 62 | S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete all as specified and as directed. |
| 63 | S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling PCC (1:3:6), type C-0, complete all as specified and as directed. |
| 64 | S&F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of members shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats complete all as specified and as directed. |
| 65 | S&F factory made IInd class hard wood 35mm thick Plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and directed. |
| 66 | S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing complete all as specified and as directed. |
| 67 | S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall becovered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail.Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 68 | S&F Mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified and as directed. |
| 69 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm, ISI marked, complete all as specified and as directed. |
| 70 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded sectioncomplete all as specified and as directed. |
| 71 | S&F 200 mm aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed. |
| 72 | S&F 100mm size aluminum handle fabricated, "D"type, anodized ISI marked complete all as specified and as directed. |
| 73 | S&F 150mm size aluminum handle fabricated, "D"type, anodized ISI marked complete all as specified and as directed. |
| 74 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 75 | S&F Godrej pattern mild steel cupboard with shutter made of 18 gauge M.S sheet 60 Cm depth sides incl with back and 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupnoard to be fixed to wall with 6 nos of hold fasts of 25 X 3 mm flat iron, 15 cm long. The cost od hold fasts & grouting then in CM (1:3) is deemed to be included in unit rates ( only front face of cupboard to be measured) complete all as specified and as directed. |
| 76 | Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified and as directed. |
| 77 | S&F 18 mm/ 19 mm thick prelaminated particle board, interior grade,prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and as directed. |
| 78 | S&F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as specified and as directed. |
| 79 | S&F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised, 30 mm wide flap (when open), complete all as specified and as directed. |
| 80 | S&F in repair 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws,complete all as specified and as directed. |
| 81 | S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and as directed. |
| 82 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed. |
| 83 | S&F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and as directed. |
| 84 | S&F MS 25 mm dia curtain rod, bright finish, including set of fixing brackets, fixed to wall in repairs, complete all as specified and as directed. |
| 85 | M&L for mild steel door spring 150 mm, ordinary rat tail rod pattern spring including roller and roller plate, fixed in repairs, complete all as specified and as directed. |
| 86 | M&L for Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4, including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 87 | M&L for 1-2mm thick white wall putty on new/old surfaces of walls & making the surfaces fair and smooth complete all as specified and as directed. |
| 88 | M&L for Three coats of white wash including preparation of new plastered wall surfaces of any description complete all as specified. |
| 89 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint to achieve uniform and smooth surface having no sign of brush marks complete all as specified and as directed. |
| 90 | M&L for preparation of old surfaces of walls by washing rubbing down and stopping of surface and applying one coats of cement base paint complete all as specified and as directed. |
| 91 | M&L for complete of newly plastered surfaces as of walls and applying twocoats of oil bound distemper over a coat of alkali resistant primer to achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 92 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 93 | M&L for preparation of new surfaces ofsteel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 94 | M&L for preparation of old painted surfaces of steel of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 95 | M&L for preparation of old painted surfaces of wood and wood basedof any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 96 | M&L for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 97 | M&L for preparation of old decorated surface of walls and applying one coat of weather proof exterior emulsion (colour matching with existing) paint by roller brush of approved manufacturercomplete all as per manufactures instruction and as directed. |
| 98 | M&L for removal of existing treatment completely on walls and preparaing the surface forapplying two coats of oil bound distemper to achieve uniform and smooth surface by roller brush over and including cement based wall care putty 1mm thick(average thickness) complete all as specified and as directed. |
| 99 | M&L for preparation of old painted surfaces of concrete and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 100 | M&L for 18 to 20mm thick Udaipur green Marble (table rubbed and polished) in cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marbale stone etc complete all as specified and as directed. |
| 101 | Taking off existing manholes covers & cleaning of manholes following depth by de-watering and taking off the rubbish / sludge etc., removing the same up to 50 m distance and put into newly excavated pits of suitable size and covering with excavated earth and placing back in position the removed covers complete all as specified and as directed. (a) Depth not exceeding1 metre |
| 102 | All as per item 101.00 hereinbefore but Depth exceeding 1 metre but not exceeding 3 metre |
| 103 | S&F in repairs CP brass health faucet of 15mm bore pipe with 1.5 mtr. Flexible pipe screwed for iron pipe fancy type long body complete all as specified and as directed. |
| 104 | S&F in repairs 32 mm bore and 75cm long PVC waste pipe complete all as specified and as directed. |
| 105 | S&F in repair grating 100mm dia with or wihout waste hole of brass chromium plated fixed on floor/nahani trap with coment mortrar complete all as specified and as directed. |
| 106 | Cleaning and removing all scales and dirt etc by scraping with hard plastic/nylon wire brush and washed with bleaching power solution and thereafter washed with clean water from service water tank and mouth of circulating pipe of capacity of tank exc 250 litre but not exc 500 litre including writing letters " Tank cleaned on _ (date) boldly with thick white/black synthetic enamel paint by using stencil with height & width of each letter & figures 150mm & 10mm respectively complete all as specified and as directed. |
| 107 | All as per item 106.00 hereinbefore but capacity of tank exc 500 litre and not exc 1000 litre complete all as specified and as directed. |
| 108 | S&F in repair waste fitting brass chromium plated of32 mm dia for wash hand basinwith long screwed sanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 109 | M&L for applying cement paste mixed with RBR compound (Roof Bond Repair) mixed in ratio as per instructions to stop the seepage, applied in sides of Nahni trap/floor traps, W.C traps, junction of CI pipes, bends & similar item junctions to eliminate the seepage complete all as specified and as directed. |
| 110 | M&L forMachine pressed precast concrete interlocking paver block any shape and size confriming to IS 15658-2006 of 80 mm thickness , M-40 grade with Grey Cement and no pigment, laid over 20 mm thick sand cushion over 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregateall as specified.(Sand cushion shall be measured and paid seprately) complete all as specified and as directed. |
| 111 | M&L forsand cushioning including watering and consolidations etc complete all as specified and as directed |
| 112 | M&L for exterior grade, coloured glossyfinish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick( as approvedby GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid overincluding 15 mm thick cement screed bed in CM 1:4 . complete all as specifed and as directed. |
| 113 | M&Lfor 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in sub base all as specified & directed by Engr -in charge. |
| 114 | M&L for providing cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specifed and as directed. |
| 115 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specifed and as directed. |
| 116 | Dismantling Stone slabs and tiles laid bedded and pointed in cement mortar of any description or thickness complete all as specifed and as directed. |
| 117 | M&L for Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/ Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed. |
| 118 | S&F in repair 150mm long double legged floor door stopper aluminium alloy with rubber etc complete all as specified and as directed . |
| 119 | Taking down existing unserviceable water proofing treatment (Felt, APP etc.) including concrete padding , plaster, brick tiles, mud phuska etc, from top of RCC/arch roof slab upto 4 th storied high building, raking out joints of arch slab etc, hacking the top of RCC slab, wire brushing and then washing the surface wirth water, taking down the old materials, debris, rubbish etc from the roof and removing the same from the site complete all as specified and directed by Engineer-in-Charge |
| 120 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer"s instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and directed by Engineer-in-Charge. Note :- (i) WPC shall be measured and paid separately. (ii) Ratesinclude to carried out the work on roof slab upto 4th stories building & nothing extra shall be admissible on this account). |
| 121 | M&L for rendering(screed bed or bedding) 15 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth using extra cementmixed with water liquid proofing admixture as per manufacturer"s instruction etc complete all as specified and directed by Engineer-in-Charge Note :- (i) WPC shall be measured and paid separately (ii) Ratesinclude to carried out the work on roof slab upto 4th stories building nothing extra shall be admissible on this account. |
| 122 | S&F APP polymeric water proofing membrane, minimum 3 mm thick prefabricated in five layers and weighying not less than 3.6 Kg per sqm water proof membrane reinforced with non woven polyester matt, with a thermo fusable finish laid over compilable bitumen primer @ 0.4 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with an overlapof 150mm in longitudinal and horizontal directions ceilings and joints finally pasted with thermofused with LPG flames laid over a coat of bitumen @ 1.2 KG/Sqm as per manufacturer"s instructions incl preparation of surface and including two coats of aluminium paint over top surface of water proofing membrane complete all as specified and directed by Engineer-in-Charge.NOTE : The water proofing treatment shall be got carried out by manufacturer or their authorised applicators. |
| 123 | Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity and removing from stoe etc complete all as specified and as directed . |
| 124 | S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including taking down existing tank complete all as specified and as directed. |
| 125 | Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and as directed. |
| 126 | S&F MSjoist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars, guard bars, grills, gratings etcfixed independently or framed without connecting plates ,trusses etc any type framing confirming to Grade Fe 410-0 or Fe-310-0 including cutting bending, welding and fixing in position complete all as specified and as directed. |
| 127 | Dismantling of steel/galvalume sheetsof any description (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 128 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 129 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area exc 1.5 Sqm each and not exc 4 Sqm each complete all as specified and directed by Engineer-in-Charge.(Note :- Disturbed surface of wall shall be make good by the contractor, the rate quoted shall be deemed included for the same) |
| 130 | Taking Down shutter of any description n exc 1 sqm each complete all as specified and directed by Engineer-in-Charge |
| 131 | S&F window / ventilator section of frame72x55 mmfixed to wall or concrete surface with rowl plugsmade, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/sqm.) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including grills/guard bars made of square bars powder coated fixed to windows frame with screws at 150mm c/c both ways, 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessory fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed Make:- NCL type-4000 series or equivalent make as approved by GE. |
| 132 | M&L for providing 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in floors and finished even and smooth without using cement concrete complete all as specified and as directed. |
| 133 | S&F powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 134 | M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab man hole coversand drain covers with 40mm dia holes made in the slabs to drain runoff etc complete all as specified and directed by Engineer-In- Charge |
| 135 | M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered edges complete all as specified and directed by Engineer-in-Charg |
| 136 | Taking down existing aluminium door shutters area n exc 1.5 sqm each and carrying out necessary servicing incl greasing/oiling etc, for smooth functioning and taking down unserviceable hardwares and replacing with new hardwares and re-fixing the window shutters in position all as specified and as directed. Notes :- (a)Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule. |
| 137 | S&F Aluminium extruded standard sections, anodised (15 micron) fixed to existing framed doors, partiions etc as in repairs incl taking down existing aluminium sections all as specified and directed. Note : All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/fittings. |
| 138 | S&F Aluminium extruded standard clips, anodised (15 micron) fixed to existing panels of framed doors, partiions etc as in repairs incl taking down existing aluminium clips all as specified and directed. Note : The clips shall be of section No : 19370 of JINDAL aluminum extrusions or equivalent section in makes as specified and directed. |
| 139 | S&F in repairs aluminium grills standard design, fixed in position including taking down existing unserviceable grills of any description and making good the disturbed surfaces all as specified and as directed. Note:The weight of the grill shall not be less than 2.2 Kg/SqM |
| 140 | Supply only double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass and other parts made of heavy duty mild steel all as specified and as directed. |
| 141 | S&F in repairs Door closer hydraulically regulated, universal type suitable for aluminium door shutters Taking down aluminium side hung/ sliding window shuttersfor servicingand fixing hinges if required complete all as specified and as directed. |
| 142 | Supply only neoprene beading suitable for fixing glass panes to aluminum door shutters complete all as specified and as directed. |
| 143 | Supply only pivot hinges suitable for aluminium door shutters complete all as specified and as directed. |
| 144 | Net Contract Sum will be after deducting Sch of Credit of Rs 47435.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
