|
| 1 | Lab Equipment to Physics Department |
| 2 | Analog 50 mega Hertz Non -Windows Digital Storage OscilloscopeType of input channels: Analog, Number of AnalogChannels: 2, Record Length Per Analog ChannelSimultaneously: 100K points, Sampling Rate PerAnalog Channel Simultaneously: 1 GS/sec, Bandwidth: 50 megaHertz, Display Type: colour TFT,Minimum Display Size : 7 inch, Vertical Sensitivity: 500µV/Div to 10 V/div, Vertical Resolution: 8 bit, Time Base Range: 5 ns/div to 50 s/div, Minimum Detectable Pulse Width: 10 nanosecond, Trigger Types : Edge, pulse width, video, pattern/ state, External,Measurements : Math function-Add, subtract, multiply, divide,Automatic Measurements ofAmplitude and time, FFT (phase),low-pass êlter,Time & Voltage cursors, FFT (magnitude), Acquisition Modes : Normal,Peak Detect,Averaging,High Resolution, I/O Interface : USB, Any other features,ifapplicable: DVMFrequency Counter, Warranty : 3 year |
| 3 | 10 mHz to 25 MHz Frequency 1 channel function generator Frequency Bandwidth (Sine Wave): 10 mHz to 25 MHz, Number of channels: 1, Standard Waveforms: Sine, Square, Pulse, Ramp, DC Offset, Band Width of Arbitrary Waveform Generator: 10 mHz to 5 MHz, Modulation: AM,FM,PWM,Sweep, Display Type: LCD, Warranty: 1 year |
| 4 | Variable DC Power supply (Regulated) Maximum Power (Watt) : 120 wa, tts, DC Current Output Rating (Ampere): 0 to 4, DC Voltage Output Rating (Volt): 0 to 30, Load Regulation (Voltage) : ± (% of output + offset),Line Regulation (Voltage) ± (% of output + offset) : less than 0.01 + 1 mV, Warranty (Year): 2 |
| 5 | Dual DC Power supply (Regulated)For Opamp experiments, -15-0+15 V |
| 6 | Battery eliminatorVariable voltage range: 0 to 30 V (+10%), Variable current range: 0 to 30 A (+10%), voltage / Frequency: 220 V +/- 10%, 50 Hz, Single Phase AC, All measuring probes with connectors to be provided |
| 7 | CRO ProbesProfessional Grade, Durable Quality, 1.25 Meter Length, BNC and Crocodile clip |
| 8 | Digital stop clockCabinet Material: Steel, Frame Material: Aluminium, Cover Material: Transparent Glass, Power Requirements: 220-230 Volts AC, Resolution of Stopwatch/Chronograph (in sec)(Hint: 1/100): 999.9 seconds, Timing capacity (hours:minutes:seconds), Max: 23:59:59 |
| 9 | Silver Steel Stop Watch (Digital) Resolution of Stopwatch/Chronograph (in sec) (Hint: 1/100): 0.01, Timing capacity (hours:minutes:seconds), Max: 23:59:59,Shape of Clock : Round, With battery |
| 10 | Lee\" s disc apparatus for thermal conductivitymeasurements (Standard PG level)(a) Lee\"s disc control unit(b) Heating unit with disc (Brass/ stainless steel) (c) Brass/stainless steel discs (2 nos.) 75mm dia.(d) test samples, glass, teflon, plywood etc. |
| 11 | Experimental setup kit for Transistor characteristics studies To study (a) Common Base Characteristics,(b) Common Emitter Characteristics (c) Common Collector Characteristics, (d) Class A Amplifier (e) Class B Amplifier (f) Class C Amplifier |
| 12 | Digital MultimeterAble to measure Resistance -200 ohms to 200MeghaohmsDC volts- few mV to 1000VAC volts - few mV to 750 VAC current - few mA to 20 ADC current - few mA to 20 ATemperature measurementTransistor beta value measurementFrequency - few kHz to 200KHzCapacitance - few nanofarad to 200 micro farads |
| 13 | Transmission Grating 6000 lines/cm, With a good resolution, Able to get second order |
| 14 | Quartz prism Birefringent, Equilateral & rectangular, 38mm x38mm, |
| 15 | Cornu\"s experimental septup (elliptical and hyperbolic fringes) for the determination of modulii of elasticity of bars Parts of the setup: (a) Travelling Microscope with rigid baseLeast count 0.01mm, 30x magnification, 25 mm travel distance(b) Knife edges and rigid base (Anodised aluminium aloy and SS)(c) Plano covex len 50mm dia, 100cm focal length(d) optical flat glass disc 50mm dia.(e) Beam splitter(f) Sodium vapour lamp, housing and power supply |
| 16 | He-Ne laser Wavelength - 632.8 nm,Power -10 mW, Beam diameter less than 0.9mm |
| 17 | Four Probe (linear) set up for thin film electrical measurementsAccessories should include the following.(a) Four Probe with Power Supply (b) Oven With digital temperature Controller (upto 200ºC)(c) Sample mount, able to hold different thin films(d)Resitivity measurement(e) Constant Current power supply digital Accuracy : 0.25% of the reading 1 digit Load Regulation : 0.03% for no load to full load |
| 18 | Spectrometer 6\" dia circle reading 30 seconds - Objectives used in telescope and collimator has to be achromatic and to be provided with rack and pinion focussing arrangement - Telescope arm and prism table are to be provided with fine and coarse adjustment - Three leveling screws for prism table and is engraved with concentric rings & lines -The scales and verniers are to be of stainless steel and are machine divided - Clamping devices tolock telescope and collimator - Sprit Level : 60/80mm length - Only high quality makes need to be quoted |
| 19 | Digital IC trainer kitType of display for On-board measurement: Digital, Accessories: Patch Cords for Interconnection |
| 20 | Lamp and scale arrangement (with telescope)Transformer, for use with 220 volts, Good quality make |
| 21 | GalvanometerSensitivity: 2microAmp/div, bakelite stand, DC moving coil panel meter |
| 22 | FET characteristics apparatus Dual power supply and three DC meters - reliable terminal/sockets, Rigid case, Operating Instructions, giving details of Object, Theory, Design procedures, Report - Only high quality makes need to be quoted |
| 23 | MOSFET Characteristics apparatus To study and plot the I-V characterisitcs - The board has to consist: IC regulated power supply 0-10V at 30mA , IC regulated power supply 0-60V at 200mA, Digital DC voltmeter ranges 0-20V, Digital DC voltmeter ranges 0-200V, Digital DC Ammeter with selectable switch range 0-2/20mA, Power MOSFET, Mains ON/OFF switch & Fuse, Good Quality, reliable terminal/sockets, Rigid case, Operating Instructions, giving details of Object, Theory, Design procedures, Report - Only high quality makes need to be quoted |
| 24 | UJT Characteristics Apparatus with regulated Power SupplyInstrument Comprises of two DC regulated Power Supply 0-20 V /150mA & 0-20 V / 150 mAthree round meters for voltage & current measurement, one UJT 2N2646 mounted behind the panel, connections of supplies, Meters & UJT brought out at 4mm sockets. |
| 25 | SCR Characteristics Apparatus Objective :To plot Anode current Vs Anode Cathode Voltage Characteristics. Gate Characteristics (Open Gate), Gate Characteristics (Gate connected).Features :Instrument comprises of two DC Regulated Power Supplies 0-30VDC/150mA & 0-1VDC/150mA, three round meters for voltage & current measurement, SCR 2P4M mounted behind the panel, connections of Supplies, Meters & SCR brought out at 4mm Sockets. |
| 26 | Lecher Wire Apparatus with RF oscillator with long wooden stand with wires to create wave and measure it with bridge RF Oscillator: Frequency 2.5 MHz to 6.5 MHz Continuously Variable,Wooden Bench: Long with wires, scale, Terminals: To connect to Oscillator, Complete with Manual and Connection Wire |
| 27 | Travelling Microscope for Newton\"s ring and Air wedge experimentsThree axis measurement possibility: horizontal, vertical and right angled transverse motion, coarse and fine movements,resolution of the fine movement: 10 micron, rack and pinion type focusing mechanism,3X long working distance objective and a 10X eyepiece with cross hair,Achromatic Type objective, Base construction : Cast Aluminium,Only high quality makes need to be quoted |
| 28 | Bread board for electronic experiments Solderless breadboard with 840 points, 128 Groups of 5 connected terminals, 8 Bus of 25 connected terminals, High quality make |
| 29 | Kater\"s Pendulum ApparatusTo measure the local acceleration of gravity, Steel, high quality make |
| 30 | Static Torsion ApparatusHigh quality make with weights (100gms) |
| 31 | Seebeck and Peltier DemonstratorA benchtop unit to examine the performance of a thermoelectric device for Peltier or Seebeck tests as a heat pump or generator. |
| 32 | Hot platewith magnetic stirrer with digital programmable temperature controller500 Degree C, digital programmable temperature controller |
| 33 | Microwave Lab Kit, For LaboratoryFrequency and guide wavelength measurement, Vswr Measurement, dielectric and attenuation measurement, Klystron MountXKM-1411Matched TerminationXtx-1271Klystron tube2k-251S.S tunerXST-1281IsolatorXIS-1401waveguide standXWS-1503Frequncy Meter(DRF)XFM-1421Cooling fanCF-1301Variable AttenuatorXVA-1221VSWR MeterVS-1051Slotted SectionXSL-1231Klystron power supplyKPS- 1051Tunable probeXTP- 1241BNC cable4 Dectector MountXDM-1251Fasteners1setMovable shortXMS-126Experiment Manual1 set |
| 34 | Millikan Oil Drop Apparatus Consisting of a heavy cast iron base which is mounted on a steel pillar that carries the microscope and the lamp house. Clear droplet observation and low droplet drift are essential for success with Millikan’s classic experiment.The microscope can be adjusted smoothly by slow motion screws in the horizontal as well as in the vertical direction. Atomizer is also fitted on the same carriage. Manual to be provided. |
| 35 | Thomson\"s e/m measurement apparatus Helmholtz coils of radii 14, Number of turns 160 on each coil, Accelerating Voltage 0 - 250V, Deflection plates voltage 50V - 250V |
| 36 | pH meterHigh quality make |
| 37 | Xenon lamp300W, ozone free lamp, 1000 hrs lamp life, Color temperature: 6000K (daylight), High arc stability, High color rendering index, Hot restart capability, specral range: 200 - 2000 nm, Beam diameter: 50mm, Standard warranty with UV and visible filters |
| 38 | RF Cable Ultra low loss cable up to 18 GHz, 2 Nos of cable each of length 10 meters, Insertion Loss: 1 dB / meter at 18 GHz., SMA (M) to N (M) |
| 39 | Stefans Constant kit Two copper plates with heater element in between three thermometer built in power supply A.C voltmeter AC Ammeter and thier controls. The kit is self contained and needs no additional equipments. Manual required |
| 40 | Rectangular wave guide with BNC connectors for dielectric measurement (Cavity perturbation)High quality make, X band, probe, adapters |
| 41 | Rectangular wave guide with BNC connectors for dielectric measurement (Cavity perturbation)High quality make, S band, probe, adapters |
| 42 | Rectangular wave guide with BNC connectors for dielectric measurement(Cavity perturbation) High quality make, C band, probe, adapters |
| 43 | Rectangular wave guide with BNC connectors for dielectric measurement(Cavity perturbation) High quality make, Ku band, probe, adapters |
| 44 | Line interactive UPS for GM counter3.5kVA / 48V, DSP Sine Wave Technology, High Load Power Factor, Battery, Warranty -2 years |
| 45 | IC 74151Lab consumable for electronic experiment: |
| 46 | IC7493Lab consumable for electronic experiment: |
| 47 | IC 7400Lab consumable for electronic experiment: |
| 48 | IC 7432 Lab consumable for electronic experiment: |
| 49 | IC 7408 Lab consumable for electronic experiment: |
| 50 | IC 7404 Lab consumable for electronic experiment: |
| 51 | IC 7473 Lab consumable for electronic experiment: |
| 52 | IC 7402 Lab consumable for electronic experiment: |
| 53 | IC 7490 Lab consumable for electronic experiment: |
| 54 | MOSFET - BS170Lab consumable for electronic experiment: |
| 55 | UJT -2N2646Lab consumable for electronic experiment: |
| 56 | IC 741Lab consumable for electronic experiment: |
| 57 | IC 555Lab consumable for electronic experiment: |
| 58 | SL 100 (Transistor)Lab consumable for electronic experiment: |
| 59 | BC 107 (Transistor)Lab consumable for electronic experiment: |
| 60 | BF194(Transistor) Lab consumable for electronic experiment: |
| 61 | JFET BFW10Lab consumable for electronic experiment: |
| 62 | Low range Ammeter 0-500 micro ampere |
| 63 | Low range Ammeter 0-500 mA |
| 64 | Ammeter 0-5 Amp 0-1 Amp |
| 65 | Connection Wires (Copper ) Roll Lab consumable for electronic experiment: |
| 66 | Connection wires for Bread Board pack Lab consumable for electronic experiment: |
| 67 | 9 v battery for multimeter Lab consumable for electronic experiment: |
| 68 | Silver/ Silver chloride reference electrode Length: 7 cm, Diameter: 2mm, Material safety data sheet |
| 69 | Ammonium tetrathio molybedate 10g Lab consumable: Chemical |
| 70 | Zinc rod for Daniel Cell Lab consumable: Chemical |
| 71 | Copper Sulphate (100 gm) Lab consumable: Chemical |
| 72 | Isopropyl alcohol (5 litres) Lab consumable: Chemical |
| 73 | Acetone ( 5litres) Lab consumable: Chemical |
| 74 | De-ionised water (5 litres) Lab consumable: Chemical |
| 75 | Stannous Chloride (100gm) Lab consumable: Chemical |
| 76 | PH paper strips (box) Lab consumable: Chemical |
| 77 | Tungsten di sulphide (100gm) Lab consumable: Chemical |
| 78 | Ferrous Chloride (100gm) Lab consumable: Chemical |
| 79 | Nickel Chloride (100gm) Lab consumable: Chemical |
| 80 | Zinc Sulphate (100 gm) Lab consumable: Chemical |
| 81 | Bismuth Nitrate (100gm) Lab consumable: Chemical |
| 82 | Copper Chloride (100 gm) Lab consumable: Chemical |
| 83 | Cobalt Chloride (100gm) Lab consumable: Chemical |
| 84 | Ruthenium Chloride (10 gm) Lab consumable: Chemical |
| 85 | Polyvinyl alcohol (100 gm) Lab consumable: Chemical |
| 86 | PMMA (100gm) Lab consumable: Chemical |
| 87 | Mercury (100gm) Lab consumable: Chemical |
| 88 | ITO/ FTO coated glass plate Lab consumable: Chemical |
| 89 | TiCl4 solution (1M) in Toluene Lab consumable: Chemical |
| 90 | Borosil glass beaker (100 ml) Lab consumable: Glassware |
| 91 | Borosil glass beaker (50 ml) Lab consumable: Glassware |
| 92 | Borosil glass beaker (250 ml) Lab consumable: Glassware |
| 93 | Borosil glass beaker (500 ml) Lab consumable: Glassware |
| 94 | Conical flask with stopper (100ml) Lab consumable: Glassware |
| 95 | Culture bottle (15 ml) Lab consumable: Glassware |
| 96 | Culture bottle (30 ml) Lab consumable: Glassware |
