Miscellaneous Civil Works At Infopark Cherthala As Mentioned In Nit
Tender Value
27.33 Lakhs
Estimated cost
Bid Submission
04 Mar 2022
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
cherthala → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Miscellaneous Civil Works At Infopark Cherthala As Mentioned In Nit
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually or by mechanical means including disposal of material in dumping yard outside the campusas per direction of Engineer-in-charge |
| 2 | Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of material in dumping yard outside the campus as per direction of Engineer-in-charge |
| 3 | Dismantling aluminium/ Gypsum/wooden partitions, doors, windows, fixed glazing/ mirror and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 4 | For water bearing conditions, solvent free polyurethane based injection system .Shall be injected through non-returnable packers placed at the required locations after drilling hole in such a way that the hole passes through the cracks in a slanting position. Thepackers shall be fixed using instant plugging compound. The injection can be carried out with specified make, Two component, Fast setting polyurethane injection resinand two component, strengthening type epoxy injection system compound, at the identified points.(Elastic PUR Injection resin for permanent water tight sealing) Including all labour and material. |
| 5 | Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth,disposal on the scope of contractor. |
| 6 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.\" |
| 7 | Providing and laying in position cement concrete,1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level. |
| 8 | Providing and laying RCC in position 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) mix grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level. |
| 9 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level,Thermo - Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns. |
| 11 | smooth plastering of surface for painting providing 12 mm thick cement plaster of mix 1:3(1 cement:3 fine sand) finished with a floating coat of neat cement etc. complete as per directions of Engineer-in-charge |
| 12 | Providing rough plastering for tile work with 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 13 | Providing and fixingpaneling made out ofaluminium box frame using extruded sections of size 50 x 25 mm - 1.5mm thick at 600mm c/c in both direction covered with 12 mm thick fire retardant plywood on sides up to false ceiling and finished with 4 mm thick decorative veneer faced plywood of approved shade including formingpattern and details as per directions of Engineer-in-charge.Rate shall include cost for necessary hardwares and shall include for forming a paneling to any shape including circular profile etc. complete. Actual seen surface area.(Elevation)(i.e) from FFLto bottom of false ceiling height will be measured and paid. |
| 14 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.as per directions of Engineer-in-charge |
| 15 | Providing and fixing I st quality vetrified wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing and fixing 18 mm thick gang saw cut granite of anny colour and shade, mirror polished premoulded and prepolished, machine cut for kitchen platforms, steps, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 17 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 18 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface etc complete as per directions of Engineer - in - charge |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 20 | Finishing walls with textured interior paint of required shade (two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of interior primer applied @ 2.20kg/10 sqm Make: Asian paints/ Nerolac/ Berger/ ICI |
| 21 | Painting two or more coats with premium acrylic emulsion paint of interior grade, having VOC(Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour as per directions of Engineer-in-charge. Make: Asian paints/ Nerolac/ Berger/ ICI |
| 22 | Painting two or more coats with Acrylic Smooth exterior paint of required shade as per directions of Engineer-in-charge.Make: Asian paints/ Nerolac/ Berger |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade one or more coatsincluding appropriate priming coat, preparation of surface by scrapping/cleaning, etc. complete on steel work at all levels as per directions of Engineer-in-charge. |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.80 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including suitable size ridge andcutting to size and shape wherever required. |
| 25 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete of Hot finished welded type tubes. |
| 26 | Engaging labours for undertaking miscellaneous work:Mason (brick layer) 1st class |
| 27 | Engaging labours for undertaking miscellaneous work: Coolie |
| 28 | Engaging labours for undertaking miscellaneous work :Welder |
AI Tender Summary
Tender Timeline
Feb 17, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender