Establishment Of Quality Control/Material Testing Laboratory In District Pulwama (Supplying Of Engineering Laboratory Products) Establishment Of Quality Control/Material Testing Laboratory In District Pulwama (Supplying Of Engineering Laboratory Products), pulwama-Jammu And Kashmir

Establishment Of Quality Control/Material Testing Laboratory In District Pulwama (Supplying Of Engineering Laboratory Products) Establishment Of Quality Control/Material Testing Laboratory In District Pulwama (Supplying Of Engineering Laboratory Products) , Is Sieve Sets (Size 20Cm Dia) (Specification Of Is:460) Brass Frame 20 Cm Dia10mm 4.75Mm 2.36Mm 2.00Mm 1.18Mm 1.00Mm 600 Micron (?) 425 Micron (?) 300 Micron (?) 150 Micron (?) 90 Micron (?) 75 Micron (?) Pan And Cover , Is Sieve Sets (Size 30Cm Dia) (Spacification Of Is:460) Brass Frame 20 Cm Dia125mm 106Mm 90Mm 80Mm 63Mm 53Mm 45Mm 40Mm 37.5Mm 31.0Mm 26.5Mm 22.40Mm 20Mm 19Mm 16Mm 13.2Mm 12.5Mm 11.2Mm 10.0Mm 9.5Mm 6.3Mm 5.6Mm 2.8Mm 4.75Mm 3.35Mm 2.36Mm (Complete Operation In All Respects) , Standard Laboratory Use Coarse Grade Sand Course Sand Must Be Supplied As Per(Iso:650) In 25 Kg Bag Must Be Clean And Free From Organic/Inorganic Impurities Or Excess Slit. , Standard Laboratory Use Medium Grade Sand Medium Sand Must Be Supplied As Per(Iso:650) In 25 Kg Bag Must Be Clean And Free From Organic/Inorganic Impurities Or Excess Slit. , Standard Laboratory Use Fine Grade Sand Fine Sand Must Be Supplied As Per Iso:650) In 25 Kg Bag Must Be Clean And Free From Organic/Inorganic Impurities Or Excess Slit. , Fresh Concrete Mixer (Pan Type 40 Ltr Capacity ) Equipment Must Be Transportable On Self Wheels It Must Be Supplied With Mixing Drum Capacity Of 40 Ltr Of Fresh Concrete. The Drum Rpm At Least 20 To 25 Rpm Desirable Provision Of Adjustable Blades Suitable For Mixing Miniral Aggregates Equipment Must Run By 415 V(±5%) 50 Hz Three Phase Ac Supply Or Single Phase Of 220V±5% 50Hz . Equipment Must Be Superior Make/Manufacture And Finish Complete In All Respects. , Laboratory Concrete Spacimen Cube Moulds (As Per Relevent Is Spacification (Is:10086) Cube Moulds For Preparing Concrete Specimens For Checking Comprehsive Strength Of Cement Concrete For Size 150Mm. , Motorized Sieve Shaker Equipment Must Consists Of Motorizedsieve Shaker For Sieving Dry Granular Or Powdered Materials/Soils It Must Accommodate Upto 8 Sieves Of 20Cmdia The Equipment Must Be Geared Motor Driven Of Suitable Hp. Directions Of Inclination Of Sieve Table Must Change Progressively In Clock Wise Direction, With Both Gyratory And Tapping Motion Of Table. Equipment Must Be Controlled By Proper Switching Device With Timer Facility And Emergency Stop/Start Button. Equipment Must Run By 220V (±5%). 50Hz Single Phase Ac Supply. Equipment Must Be Of Good Make/Manufacture And Finish (Complete And Operational In All Respects. , Water Bath (Reputed Make) Water Bath Thermostatically Controlled Or With Digital Controller Cum Indicator,Doubled Walled,Inner Chamber Made Of Non-Rusting/Stainless Steel,Outer Body Made Of Ss And Minimum Dimensions (425*325*100)Mm Or Better,With Temperature Range Of 5ºc To 250Oc ±1O C With Precision Of +0.5C,Run By 220 V (+5%) 50Hz, Single Phase Ac Supply.Equipment Must Be Of Good Make/Manufactureand Finish. (Compete & Operational In All Respects) , Electric Hot Air Oven (Reputed Make) Superior Laboratory Electric Oven,Thermostatically Controlled Or With Digital Controller Cum Indicator With Safety Alarm.It Must Be Doublewalled, Withouter Body Madeof Ms Powder Coated & Inner Made Of Stainless Steel.It Must Have Provision For Horizontal Ribs For Adjusting Trays At Any Height.Equipment Must Have Side Heating/Air Circulating Fan,To Distribute The Temperature Range 500 C To 250Oc±10C,With Air Ventilatorsthe Size Of Own Must Be 450*450*450 Cm, With Size Tolerance ±10Mm. Equipment Must Operate Under 220 V (±5%), 50Hz, Single Phase Ac Supply.Equipment Must Be Of Good Make/Manufacture And Finish. ( Complete & Operational In All Respects) , Precision Electronic/Digital Balance, With Dual Power Operation (Ac/Battery):400-600 Gm Capacity. Wiyh Read Out Of At Least 0.01Gm, Reproducilbilty Of 0.01Gm. ( Complete & Operational In All Respects) , Precision Electronic/Digital Balance With Dual Power Operation (Ac/Battery): Superior Brand Precision Digital Balance (5Kg) Capable Of Measuring At Least 1.0Gm To 5Kg With Permissible Error. , Precision Electronic/Digital Balance, With Dual Power Operation (Ac/Battery): Superior Brand Precision Digital Balance (30Kg), Capable Of Measuring At Least 5.0 Gm To 30 Kg With Permissible Error.(Complete & Operational In All Respects) , Precision Infrared Thermometer Digital Non-Contact Infrared Thermometer (Fluke Or Superior Make), With Backlight Lcd Display, Battery Powered, With Minimum Operational Temperature Range Of -20Oc To 300Oc (Or Better), Display Resolution Of At Least 0.1Oc/Of, Suitable Spectral Response, Class-2 Laser Power With Display Hold Feature.(Complete & Operational In All Respects) , Precision Probe Type Thermometer Digital Contact Type Probe Thermometer (Superior Make), Battery Powered, With Minimum Operational Temperature Range Of -50Oc To 300Oc (Or Better, Display Resolution Of At Least 0.1Oc/Of. (Complete & Operational In All Respects) , Aggregate Impact Testing Machine Standard (As Per Specification Of Is:9377) Aggregate Impact Testing Machine For Determination Of Impact Value For Small Size Mineral Aggregates/Rocks.Equipment Must Be Of Good Make/Manufacture And Finish. (Complete & Operational In All Respects) , Enamel Ei-Tray: Sampling Purpose Enamel Tray/Plates/Bucket Of Following Minimum Sizes.A) 250X300 Mm Tray.(Complete & Operational In All Respects) , Enamel Ei-Tray: Sampling Purpose Enamel Tray/Plates/Bucket Of Following Minimum Sizes.B) 450X600 Mm Tray.(Complete & Operational In All Respects) , Flakiness Apparatus (Shape Test) As Per Is Specification/Sp-36, Is:2386 (Part-1) Equipment Must Consist Of Following:Thickness Gauge Manufactured From Heavy Gauge Steel With Is-Certification Stamp.Equipment Must Be Of Good Make/Manufacture And Finish.(Complete & Operational In All Respects) , Elongation Apparatus (Shape Test) As Per Is Specification/Sp-36,Is: 2386 (Part-1) Equipment Must Consistof Following:Length G Auge Manufactured From Superior Steel, Mounted On A Hardwood Base, With Is- Certification Stamp.Equipment Must Be Of Good Make/Manufactureand Finish.(Compete & Operational In All Respects) , Standard Vicat Apparatus (Cement Testing) Equipment Must Be Provided For Determination Of Consistency Of Standard Cement Paste And Initial- Final Setting Times Of Cement .Equipment Must Be Inconfirmationwith Is: 5513-1976 With Following Minium Specifications,1) A Stable Frame With A Vertically Movable Rod To Accommodate Consistency Plunger And Setting Time Needles And Having A Cape At The Top .2) Vicant Mould In The Form Of Frustum Of A Cone With Internal Diameter Of 60Mm At The Top, 70Mm At The Bottom, And A Height Of 40Mm. 3) Split Type Vicat Mould With Clamping Ring. 4) Ms-Base Plate And Glass Base-Plate For The Mould. 5) Initial Setting Time Needle.6) Final Setting Time Needle.7) Standard Consistency Plunger.(Equipment/Supply Must Be Of Superior Make/Manufactures And Finish, Complete In All Respect) , Le Chatelier Soundness Test Apparatus (Cement) Le Chatellers Moulds, With Is Certification, Must Be Supplied For Determination Of Soundness Of Cement, And Class A And B Times. The Apparatus Must Be In Confirmation With Is: 5514,Is: 1727, Is: 2645, Is: 4031 And Is 6932 (Part-9) With Following Minimum Specification.1) One Split Cylinder Mould 30Mm Dia X 30Mm High,Made Offspring Brass With Two Indicator Arms Strongly Soldered On Either Sides Of The Split. 2) Two Glass Plates.3) One Lead Weight Approximately 100 Gms. (Equipment/Supply Must Be Of Superior Make/Manufactures And Finish, Complete In All Respect) , Le Chatelier Water Bath With Controller Equipment Must Be Compatible With Requirements Of Le Chateliers Soundness Test With Following Minimum Specifications. 1) Water Balh Must Be Double Walled Made From Heavy Gauge Stainless Steel Sheets, For Maintaining The Temperature Of Water At 27± 20C, With Proper Insulation Provided Between The Walls, 2) Provided With An Immersion Type Heater With Thermo Stat Regulator For Controlling Temperature.3)Provided With Arrangements For Having Removable Rack To Hold Multiple Le Chatlier’S Moulds.4) Operational At 220V±10V Single Phase 50Hz Ac Supply (Equipment /Supply Must Be Of Superior Make/Manufacture And Finish Complete In All Respect). , Slump Test Apparatus (As Per Is Specifications Is 7320) Apparatus Must Be Complete For Determination Of Slum Of Fresh Concrete For Measuring Its Consistancy For Aggregate Size Less Than 38Mm Apparatus Must Include Standard Size Slump Cone,Base Plate & Camping Rod Equipment/Supply Must Be Of Superiormake/Manufacture And Finish, Complete In All Respect , Cement Mortar Mixer Equipmentmust Be Provided For Preparation Of Plastic Mortar Of Cement And Pozzolanic Materials For Making Different Types Of Test Specimens In The Laboratory.Equipmentmust Be In Confirmation With Is 10890-1984, Is:1727-1967, Is: 4031 And Must Comprise Of Following Specifications 1) A Stainless Steel Mixing Bowl Of About 6 Litre Capacity, Which Can Be Held With The Mixing Apparatus And Its Height Adjustable 2) A Stainless Steel Mixing Paddle Of Standard Specified Shape And Dimensions Which Can Be Attached Or Removed Easiy 3) A Power/Motor-Driven Mixer Which Simultaneously Imparts Two Motions To The Mixing Paddle I.E. Revolving And Planetary They Being Opposite To One Another In Direction.4) A Two Speed Gear Box (Low High) To Revolve Paddle Atapproximately 140 Pm ±5Rpm And 285 ±10Rpm Rpm With Corresponding Planetary Motion Of 62±15Rpm And 125±10Rpm Respectively 5)Allied Accessories Like Scraper, Cleaning Brush Etc. (Equipment Supply Must Be Of Superior Make/Manufacture And Finish Complete In All , Bitumen Binder Centrifuge Extractor (As Per Relevant Is Specifications/ Astm D 2172)Manually Operated Blumen Birder Centrifuge Extractor Forbituminous Mix Up To 1.5 Kg Capacity Win Hand Speed Control With Filter Paper Discs (Set Of 500 Sheets) Equipment Must Be Of Good Make Manufacturer And Finish Complete & Operational In All Respects. , Softening Point Apparatus (Ring & Ball Method) The Test Apparatus Must Be As Per Is1205 Astmd36 Relevant Specifications, For Determination Of Softening Temperature Of Bitumen, Using Ring And Ball Method Equipment Must Have Built In Heating Facility Magnetic Stirrer And Temperature Controller Apparatus Must Be Operational For 220V, 50Hz, Single Phase Ac Supply. Equipment Must Be Of Superior Make/Manufacture And Finish, Complete In All Respect. , Ductility Apparatus (Electrically Operated With Cooling Arrangment) The Test Apparatus Must Be As Per Is 1208/Astmd 113 Relevant Specifications, For Determination Of Ductility Of Bitumen Using Control Elongation (Constant Speed) By Way Of Ductility Machine Equipment Must Have Built In Water Bath With Heating Facility Using Electric Pump Circulator And Heater Equipment Must Be Supplied With Ductility Moulds And Base Plates For Testing Three Samples Simultaneously. Apparatus Must Be Operational For 220V, 50Hz, Single Phase Ac Supply. Equipment Must Be Of Superior Make/Manufacture And Finish, Complete In All Respect. , Consistency Test Apparatus The Test Apparatus Must Be As Per Is: 2720 Part-5, Is: 9259 Relevant Specifications, For Determination Of Consistency (Liquid Limit) Of Soils By Casagrande Method The Apparatus Must Be Manually Operational With Counter With Is/Bs/Astm Grooving Tools, Gauging Block. Equipment Must Be Of Good Make/Manufacture And Finish (Complete & Operational In All Respects). , Sand Replacemnt Field Density Apparatus (Small) Field Density Equipment Using Sand Replacement Method (Small) Must Be Supplied As Per Is: 2720 Part -28) With Following Parts: 1) Sand Pouring Cylinder Fitted With Conical Funnel And Shutter Capacity 3 Ltr (1-No). 2) Cylindrical Calibration Container 100Mm Idx150mm Height (1-No). 3) Metal Tray Size 30X30x4cm With 10Cm Central Hole (1-No) Equipment Must Be Of Superior Make/Manufacture And Finish, Complete In All Respect. , Universal Penetrometer With Penetration Cone & Bitumen Penetration Kit (Is: 1448 (Part 60). Astm: D 937, Ip: 179, Bs:4698, Astm: D 217, Ip: 50, Iso: 2137, En:1426, 13179-2). Equipment Must Consist Of Following Replicable Parts A) Universal Penetrometer With Adjustable Head And Display (1 No) B) Penetration Cone For Determination Of Consistency Of Lubricating Grease And Oils (1 No) C) Bitumen Penetration Kit Consisting Of Penetration Needle. Copper Transfer Dish, Aluminum Containers (1 No) D) Penetration Test Cone For Soils, With Cups (1 No). Equipment Must Be Of Good Make/Manufacture And Finish. (Complete & Operational In All Respects) , Los Angeles Abrasion Testing Machine With Abrasive Charge Is Standard 1S10070 To Determine The Resistance To Wear Off Small Size Coarse Aggregage Crushed Rocks, Detachable Shelf. Drum Rotation 30-33 Rmp With Electric Motor And Heavy Duty Reduction Gear Supplied With Tray For Collection Of Material, Operation Suitability 415V, 3 Phase, 50 Hz, Ac Supply Abrasive Charge Set Of 12 Hardened 48Mm Dia Digital Controller Box Equipment Must Be Of Good Make/Manufacture And Finish. (Complete & Operational In All Respects) , Cleveland Flash (Open) & Fire Point Apparatus (As Per Specification Of Is 1448, P. 69. Is. 73-2013). Equipment Must Be Capable For Determining Flash & Fire Point Or Bitumen The Flash Cup Must Be Made Of Brass With Insulated Handle. Equipment Must Have A Metal Heating Plate Electrically Operated With Orgy Regulator & Gas Jet Assembly . (Complete In All Respects With All Operational Accessories). , Absolute (Dynamic) & Kinematic Viscosity Apparatus (As Per Is Specificatios1206 Part-Ii & Part-Iii, Is:73-2013) Equipment Must Consist Of Following: A) 2-No Imported Viscometer Tubes (Cannon-Manning Vacuum Viscometer) Made Of Borosilicate Glass With Size No: 12 (Is: 1206-Part-Ii) For Determination Of Absolute Viscosity In The Range Of 300 To 8000 Poise At 60Oc, Along With Calibration Certificate. B) 2-No Imported Viscometer Tubes (Cannon-Fenske Viscometer) Made Of Borosilicate Glass With Size No: 350 (Is: 1206-Part-Ii) For Determination Of Kinematic Viscosity In The Range Of 30 To 500 Cst At 135Oc, Along With Calibration Certificate. C) 1-No Oil Free Vacuum Application System With 4-Lines, With Vacuum Range Up To 300Mm Of Hg, And Least Measurable And Maintainable Level Of ±0.5Mm Of Hg. D) 3-No Mercury In Glass Tube Type Thermometer With Range Of 0Oc To 150Oc, Scale ± 0.2Oc (As Per Is: 1206-Part-Ii) E) 1-No Viscometer Silicon Bath, With Uniform Temperature Maintenance System, Using Accurate Pdi Temperature Controller With Accuracy Of ± 1Oc, For Conduction Of Absolute & Kinematic Viscosity Test On Bituminous And Cut-Back Material By Vacuum Capillary Method At Specified Temperatures. (Complete & Operational In All Respects With All Optional Accessories). , Pavement Depth/Thickness Gauge Ms Thickness Gauge With Minimum Gauging Depth Of 150Mm (Complete & Operational In All Respects) , Soil Hydrometer(As Per Ref. Standard Is: 2386) ( For Determination Of Specific Gravity Of Clays, Sands, And Gravels Of Grains Size < 10Mm.) Equip,Ment Must Consist Of 1-Kg/1 Liter Superior Glass Bottles, With Board Brass Cone Stopper, With Locking Ring And Rubber Seal. ( Complete & Operational In All Respects) , Density Bottle (As Per Ref Standard Is 2720, Part-1 It Must Consist Of Following Capacity Superior Laboratory Glass Bottles, With Capillary Vent, Leak Proof, Stopper A) 25Ml--------15 No B) 50Ml--------15 No C) 100Ml------15 No (Comlete Inall Respects With All Optional Accessorties) , Table Mounted Marshall’S Stability Apparatus (As Per Is/Astm D-1559, D-6927 Spectification) Equipment Must Consist Of Marshals Stability Loading Frame 50Kn Capacity ( With Proving Ring), Single Speed With Platen Speed Of 50.8Mm/Mm ( Precise Speed), Suitable To Operate On 220V, 50Hz, Single Phase Ac-Supply,Limit Switch Protection For Both Upward And Downward Travel, Following Must Be Supplied With The Apparatus: A) Marshall’S Steel Compaction Hammer, Weight 4.5 Kg, With A Free Fall Of 457Mm (2-No). B) Compaction Moulds (10.16Cm Dia And 7.6 Cm Height, For 25.4Mm Maximum Nominal Aggregate Size) Of Steel- Cylindrical, With Individual Extension Collar And Base Platles (6-No). C) Hydraulic Sample Eject (1-No). D) Sample Breaking Head With Load Transfer Bar And Flow Measurement Arrangement Using Dial-Gauge. E) Compaction Pedestal Comprising Of Steel Plate Capped Shall Wooden Post. Equipment Must Be Of Good Make/Manufacture And Finish. (Complete & Operational In All Respects) , Hydrulic Loading Apparatus For Load Tests (2000 Kn) For Conducting Pile Load Test As Per Is Specification/Sp-36,Is: 1888, Is: 3014. Hydraulic Jack And Pumping Unit Equipment Must Include Only Hydraulic Jack,2000Kn (200 Mt) Capacity,Along With Calibrated 2000Kn (200 Mt), 1000Kn (100 Mt) & 500Kn (50 Mt) Capacity Pressure Gauge With Suitable Least Count.Equpiment Must Include Heavy Duty Hand Operated Remote Hydralic Pumping Unit , Hihg Pressure Flexiable Pipie (At Least5m)The Hydraulic Jack Must Be Provided With A Piston Travel/Strokeatleast 150Mm Or Higher,The Supply Shell Include (4-No) Magnetc Bases,With Adjustable Long Extensions For Holding Dial Gauges For Measurement Of Displacement.Superior (Baker) Mechanical Deflection Dial Gauges (04-No) Of 0.01-50Mm Working Range. Equipment Must Be Of Superior Make/Manufacture And Finish,Complete In All Respects. , Analog Electricity Operated Ctm 1000Kn Compression Testing Machine Confirm To Is:14858 With +-1% Accuracy Loading Range:1000Kn (100 T), With L.C 5Kn Maximum Clearance Between Platens:390Mm Maximum Clearance Between Side Platens: 260Mm Platen Size:222 Mm Dia Platen Hardness:612 Hv (55 Hrc) Piston Dia:157 Mm Piston Stroke:50Mm Motor Hp:1 Motor Make:Godrej Or Crompton Greaves Power Requirement:220 V/230 V,1 Phase, 50 Hz, Ac Supply Spaciman Size:100Mm,150Mm Cube,100Mm &150Mm Dia Cylinder Standards:Is:516& Is:14858. Pumping Unit To Be Electrical Operated, Unique Features Are Calibration With 1% Of Full Scale Deflection With Trace Ablity To Nabl. Powder Coated Finshed Surface Front Gate For Protection Pump Withbrass Casing.The Complete Unit Compromises Of Loading Unit Is Fully Welded Construction Having A Cross-Head With A Spherical Seated Platen The Lower Platern Is Attached To The Top Of The Piston .Cubes Upto 30Mm & Cyllineres Upto 300Mm Dia X300mm Heigh Can Be Testyed Using The Approvpriate Models. Contineous Voltage Transformer (Cvt) Note With Nabl Calibration. Equipment Must Be Of Superior Make/Manufacturere And Finish, Complete In All Respect. , California Bearing Ratio Apparatus (As Per Specifications Of Is:9669, Is:2720-Xvi, Etc) Specification Of Cbr Moulds. The Materials For Construction Of The Various Equipment Shall Be As Given In Above Standard. Mould- The Mould Dia. Shall Be 150Mm Collar- The Collar Shall Be Made From Same Material As That Of Mould. Two Similar Ears As In The Case Of The Mould Shall Be Cast Integral With The Body Or Welded. Base Plate- A Suitable Seating About 2 Mm Deep Shall Be Provided On The Top Face For Proper Seating Of The Mould. Equipment Must Be Of Superior Make/Manufacture And Finish, Complete In All Respect. , Soil Compaction Apparatus As Per Specifications/Ref. Standard Of Is: 10074 (Part Vii), Is: 2720 (Part 7), Is: 9198. Equipment Must Consist Of Following For Performing Tests To Determine Density Moisture Relations For Soils. A) Standard Compaction Apparatus (Light Compaction/Standard Proctor) Consisting Of 1000 Ml Volume Gum-Metal Mould,100Mm Dia. (Id) 127.3Mm Height. B) Base Plate & Collar, C) Hammer Of 2.6Kg With 310Mm Fall. (Equipment Must Be Superior Make/Manufacture And Finish, Complete In All Respects) , Soil Compaction Apparatus(Modified) As Per Is: 2720 (Part 8), Is: 9198, Is: 10074. Modified Compaction Mould In Mild Steel (Heavy Compaction/Modified Proctor) Consisting Of 2250Ml Volume Mould, 150Mm Diameter And 127.3Mm Height, Rammer/Hammer Weight Of 4.9 Kg With Controlled Free Vertical Fall Of 450Mm, With 50Mm Diameter Of Compaction Face/End, With Base Plate And Color. Equipment Must Be Superior Make/Manufacture And Finish, Complete In All Respects , Dynemic Cone Penetrometer (Cbr) Is Used For Rapid In Situmeasurement Of The Structural Properties Of Existing Road Pavement Constructed With Unbound Materials. The Unit Incorporates An 8 Kg Weight With A Drop Of 575 Mm And A 20 Mm Diameter Cone Fitted To The End Of The Shaft Allowing Measurements To Be Made Down To A Depth Of Approximately 850 Mm 8 Kg Weight Dropping Mass Trough A Height Of 575 Mm Anvil With Driving Rod Penetration Road With 60 Degree 20Mm Dia Cone Spanners, Tommy Bar Bottle Of Adhesive All Contained In Carrying Case Case Dimension 1200X350x200mm Appox. Weight: 30Kg , (Cement Mortar Cube Moulds) Cube Mould Of 70.6 Mm Size Conforming To Is 10086 1982 Supply Must Be Of Superior Make/Manufacture And Finish, Complete In All Respect , Compaction Factor Apparatus (As Per Is 5515). The Apparatus Shall Consist Of Two Conical Hoppers Mounted Above A Cylindrical Receiver. The Hoopers Shall Be Of Rígid Construction True To Shape And Finished Smooth Inside. They Shall Be Made Of Cast Brass Conforming To Is: 292-1961 Or Cast-Iron Of Grade 20 Conforming To Is 210-%97$$. Brass Sheet At Least 3 Mm Thick Receiver The Cylindrical Receiver Shall Be Of Rigid Construction, True To Shape And Finished Smooth Inside. It Shall Be Made Of Cast Brass Or Cast Iron. The Top Edge Shall Be Accurately Machined Normal To The Cylindrical Axis Frame The Frame Shall Be Of Rigid Construction Weldedriveted Rolled Structural Sections Would Be Suitable Accessories The Apparatus Shall Also Include Two Ordinary Trowels Having A Steel Blade Of 200 Mm In Length With Straight Edge, A Hand Scoop About 150 Mm Long, A 16 Min Diameter And 600 Mm Long Steel Tamping Bar With A Rounded Working End And Scales (Or A Balance ) To Weigh Up To 25 Kg To The Nearest 10 G Equipment Must Be Of Superior Make/Manufacture And Finish, Complete In All Respect. , Bouyancy Balance The Buoyancy Balance Consists Of A Rigid Support Frame, Incorporating A Water Tank Mounted On A Platform. A Mechanical Lifting Device Is Used To Raise The Water Tank Thru The Frame Height Immersing The Specimen Suspended Below The Balance. The Model Operates With An Electronic Top-Pan Programmed Balance Of 15 Kg Capacity Readable To 0.5 G The Support Frame Comprises A Welded Steel Frame On Top Of Which Is Mounted The Top Loading Flat Pan Balance A Cantilever Platform To Support The Immersion Tank Is Elevated By A Chain Attached To It And Operated By A Manually Operated Ratchet Mechanism The Unit Incorporates An Immersed Weighing Tank Mounted On A Platform, Which Can Be Elevated By A Manual Action Ratchet Lifting Gear To Allow The Test Specimen To Be Weighed In Air And Weighed In Water Using The Same Balance. , Laboratory Electric Hot Plates: Equipment Must Comprise Of Following Minimum Specifications 1) Ss/Ms Top With Size Of 450Mmx600mmx150 Mm (With Dimension Allowance Of ±10Mm) 2) Thermostal Control And Regulator 3) Energy Consumplion Up To 2 Kw. Operational At 220V ±10V, Single Phase, 50Hz, Ac (Equipment/Supply Must Be Of Superior Make/Manufacture And Finish. Complete In All Respect) , Automatic Controlled Single Phase Stabilizer(10Kva) As Per Is Specifications Is 9815. Equipment Must Be Indoor Floor Mounted Single Phase Automatic (Copper Wound) I/P Range90v To 300V, Single O/P Of 230±.4%, Frequency 50-60Hz.Air Cooled Construction With U/V. O/V, O/L Protection System Equipment Must Have Working Temperature Rangle -5 Degree Centigrade To 50 Degree Centigrade, 95% Rh With Proper Insulation Resistance, Including Necessary Supply Of Quality Oil. Equipment/Supply Must Be Of Superior Make/Manufacture And Finish, Complete In All Respect) , Miscellaneous Items/Glass Ware/Consumable Items/Safety Equipment , A) Superior Quality Borosilicate Bottles Of 50Ml Capacity With Capillary Bored Glass Stopper, For Determination Of Specific Gravity Of Soil/Bitumen/Powders Etc. , B) Heat Resistance Safety Glove Of Superior Quality. , C) Natural High Grade Pigmented Heavy Duty Latex Hand Gloves Of Medium Size. , D) Laboratory Appron Of Superior Make , E) Medium Size Ss Scoops/Trowels , F) Superior Quality And Make Heavy-Duty Led Flash Light With Chargeable Battery. , G) Superior Quality Masks , H) Knifel Spatula. , I) Trichloroethylene. , J) Glass Beaker 1 Liter Capacity , K) General Tool Box , L) Ss Container (1-Liters) With Lids , M) Disposable Aluminum Foil Container , N) Traffic Diversion Cones (Delineators) , O) Ss Moisture Containers With Lids

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	21-Feb-2022	Date Extension	Date	25-02-2022
2	22-Feb-2022	Additional Terms and Conditions	Other	25-02-2022

INR 1100 /-

INR 60000.0 /-

INR 30 Lakhs /-

Name of Work: Establishment of Quality Control/Material Testing Laboratory in District Pulwama (Supplying of Engineering Laboratory products)

Sl. No.	Item Description
1	IS Sieve Sets (size 20cm dia) (Specification of IS:460) Brass frame 20 cm dia10mm 4.75mm 2.36mm 2.00mm 1.18mm 1.00mm 600 micron (µ) 425 micron (µ) 300 micron (µ) 150 micron (µ) 90 micron (µ) 75 micron (µ) Pan and cover
2	IS Sieve Sets (size 30cm dia) (Spacification of IS:460) Brass frame 20 cm dia125mm 106mm 90mm 80mm 63mm 53mm 45mm 40mm 37.5mm 31.0mm 26.5mm 22.40mm 20mm 19mm 16mm 13.2mm 12.5mm 11.2mm 10.0mm 9.5mm 6.3mm 5.6mm 2.8mm 4.75mm 3.35mm 2.36mm (Complete operation in all respects)
3	Standard Laboratory use Coarse Grade Sand Course Sand must be supplied as per(ISO:650) in 25 kg bag must be clean and free from organic/inorganic impurities or excess slit.
4	Standard Laboratory use medium Grade Sand Medium sand must be supplied as per(ISO:650) in 25 kg Bag must be clean and free from organic/inorganic impurities or excess slit.
5	Standard Laboratory use Fine Grade Sand Fine sand must be supplied as per ISO:650) in 25 kg Bag must be clean and free from organic/inorganic impurities or excess slit.
6	Fresh Concrete mixer (Pan type 40 Ltr capacity ) Equipment must be transportable on self wheels it must be supplied with mixing drum capacity of 40 Ltr of fresh concrete. The drum RPM at least 20 to 25 RPM desirable provision of adjustable blades suitable for mixing miniral aggregates equipment must run by 415 V(±5%) 50 HZ Three Phase AC Supply or single Phase of 220V±5% 50HZ . Equipment must be superior make/manufacture and finish complete in all respects.
7	Laboratory Concrete spacimen Cube moulds (As per relevent IS Spacification (IS:10086) Cube moulds for preparing concrete specimens for checking comprehsive strength of cement concrete for size 150mm.
8	Motorized Sieve Shaker Equipment must consists of motorizedSieve Shaker for sieving dry granular or powdered materials/soils it must accommodate upto 8 sieves of 20cmdia the equipment must be geared motor driven of suitable HP. Directions of inclination of sieve table must change progressively in clock wise direction, with both gyratory and tapping motion of table. Equipment must be controlled by proper switching device with timer facility and emergency stop/start button. Equipment must run by 220V (±5%). 50HZ Single Phase AC Supply. Equipment must be of good make/manufacture and finish (complete and operational in all respects.
9	WATER BATH (REPUTED MAKE) Water bath thermostatically controlled or with digital controller cum indicator,doubled walled,inner chamber made of non-rusting/stainless steel,outer body made of SS and minimum dimensions (425*325*100)mm or better,with temperature range of 5ºC to 250oC ±1o C with precision of +0.5C,run by 220 V (+5%) 50Hz, Single Phase Ac Supply.Equipment must be of Good make/manufactureand finish. (COMPETE & OPERATIONAL IN ALL RESPECTS)
10	Electric hot air oven (Reputed Make) Superior Laboratory electric Oven,Thermostatically controlled or with digital controller cum indicator with safety alarm.It must be doubleWalled, withouter body madeof MS powder coated & inner made of stainless steel.It must have provision for horizontal ribs for adjusting trays at any height.Equipment must have side heating/air circulating fan,to distribute the temperature range 500 C to 250oC±10C,with air ventilatorsthe size of own must be 450*450*450 cm, with size tolerance ±10mm. Equipment must operate under 220 V (±5%), 50HZ, Single phase AC supply.Equipment must be of Good make/manufacture and finish. ( COMPLETE & OPERATIONAL IN ALL RESPECTS)
11	PRECISION ELECTRONIC/DIGITAL BALANCE, with dual power operation (AC/Battery):400-600 gm capacity. Wiyh read out of at least 0.01gm, reproducilbilty of 0.01gm. ( COMPLETE & OPERATIONAL IN ALL RESPECTS)
12	PRECISION ELECTRONIC/DIGITAL BALANCE with dual power operation (AC/Battery): Superior Brand Precision Digital Balance (5Kg) Capable of measuring at least 1.0gm to 5Kg with permissible error.
13	PRECISION ELECTRONIC/DIGITAL BALANCE, with dual power operation (AC/Battery): Superior Brand Precision Digital Balance (30Kg), capable of measuring at least 5.0 gm to 30 Kg with permissible error.(COMPLETE & OPERATIONAL IN ALL RESPECTS)
14	PRECISION INFRARED THERMOMETER Digital non-contact infrared Thermometer (Fluke or Superior Make), with backlight LCD Display, battery powered, with minimum operational temperature range of -20oC to 300oC (or better), display resolution of at least 0.1oC/oF, suitable spectral response, Class-2 Laser power with display hold feature.(COMPLETE & OPERATIONAL IN ALL RESPECTS)
15	PRECISION PROBE TYPE THERMOMETER Digital contact type probe thermometer (Superior Make), battery powered, with minimum operational temperature range of -50oC to 300oC (or better, display resolution of at least 0.1oC/oF. (COMPLETE & OPERATIONAL IN ALL RESPECTS)
16	AGGREGATE IMPACT TESTING MACHINE Standard (As per Specification of IS:9377) Aggregate Impact Testing Machine for determination of Impact Value for small size mineral aggregates/rocks.Equipment must be of good make/manufacture and finish. (COMPLETE & OPERATIONAL IN ALL RESPECTS)
17	ENAMEL EI-TRAY: Sampling purpose Enamel Tray/Plates/Bucket of following minimum sizes.a)      250x300 mm Tray.(COMPLETE & OPERATIONAL IN ALL RESPECTS)
18	ENAMEL EI-TRAY: Sampling purpose Enamel Tray/Plates/Bucket of following minimum sizes.b)      450x600 mm Tray.(COMPLETE & OPERATIONAL IN ALL RESPECTS)
19	FLAKINESS APPARATUS (SHAPE TEST) As Per IS Specification/SP-36, IS:2386 (Part-1) Equipment must consist of following:Thickness Gauge manufactured from heavy gauge steel with IS-Certification Stamp.Equipment must be of good make/manufacture and finish.(COMPLETE & OPERATIONAL IN ALL RESPECTS)
20	ELONGATION APPARATUS (SHAPE TEST) As per IS specification/SP-36,IS: 2386 (part-1) Equipment must consistof following:Length G auge manufactured from superior steel, mounted on a hardwood base, with IS- certification stamp.Equipment must be of Good make/manufactureand finish.(COMPETE & OPERATIONAL IN ALL RESPECTS)
21	STANDARD VICAT APPARATUS (cement Testing) Equipment must be provided for determination of consistency of standard cement paste and initial- final setting times of cement .Equipment must be inconfirmationwith IS: 5513-1976 with following minium specifications,1)      A stable frame with a vertically movable rod to accommodate consistency plunger and setting time needles and having a cape at the top .2)      Vicant mould in the form of frustum of a cone with internal diameter of 60mm at the top, 70mm at the bottom, and a height of 40mm. 3)      Split Type Vicat mould with clamping ring. 4)      MS-base plate and Glass base-plate for the mould. 5)      Initial setting time needle.6)      Final setting time needle.7)      Standard consistency plunger.(Equipment/supply must be of superior Make/manufactures and finish, COMPLETE IN ALL RESPECT)
22	LE CHATELIER SOUNDNESS TEST APPARATUS (CEMENT) Le Chatellers Moulds, with IS Certification, must be supplied for determination of soundness of cement, and class A and B times. The apparatus must be in confirmation with IS: 5514,IS: 1727, IS: 2645, IS: 4031 and IS 6932 (part-9) with following minimum specification.1)      One split cylinder mould 30mm dia x 30mm high,made offspring brass with two indicator arms strongly soldered on either sides of the split. 2)      Two glass plates.3)      One Lead weight approximately 100 gms. (Equipment/supply must be of superior Make/manufactures and finish, COMPLETE IN ALL RESPECT)
23	LE CHATELIER WATER BATH WITH CONTROLLER Equipment must be compatible with requirements of Le chateliers Soundness test with following minimum specifications. 1)      Water Balh must be double walled made from heavy gauge stainless steel sheets, for maintaining the temperature of water at 27± 20C, with proper insulation provided between the Walls, 2) Provided with an immersion Type heater with thermo stat regulator for controlling temperature.3)Provided with arrangements for having removable rack to hold multiple Le Chatlier’s Moulds.4) Operational at 220V±10V single phase 50HZ AC Supply (Equipment /supply must be of superior make/manufacture and finish complete in all respect).
24	SLUMP TEST APPARATUS (AS per IS Specifications IS 7320) Apparatus must be complete for determination of slum of fresh concrete for measuring its consistancy for aggregate size less than 38mm Apparatus must include standard size Slump Cone,Base Plate & Camping Rod Equipment/Supply must be of superiormake/manufacture and finish, COMPLETE IN ALL RESPECT
25	CEMENT MORTAR MIXER Equipmentmust be provided for preparation of plastic mortar of cement and pozzolanic materials for making different types of test specimens in the laboratory.Equipmentmust be in confirmation with IS 10890-1984, IS:1727-1967, IS: 4031 and must comprise of following Specifications 1) A stainless steel mixing bowl of about 6 litre capacity, which can be held with the mixing apparatus and its height adjustable 2) A stainless steel mixing paddle of standard specified shape and dimensions which can be attached or removed easiy 3) A power/motor-driven mixer which simultaneously imparts two motions to the mixing paddle i.e. revolving and planetary they being opposite to one another in direction.4) A two speed gear box (low high) to revolve paddle atapproximately 140 pm ±5rpm and 285 ±10rpm rpm with corresponding planetary motion of 62±15rpm and 125±10rpm respectively 5)Allied accessories like scraper, cleaning brush etc. (Equipment Supply must be of superior make/manufacture and finish COMPLETE IN ALL
26	BITUMEN BINDER CENTRIFUGE EXTRACTOR (As per Relevant Is Specifications/ ASTM D 2172)Manually operated Blumen Birder Centrifuge extractor forbituminous mix up to 1.5 kg capacity win hand speed control with filter Paper Discs (Set of 500 sheets) Equipment must be of Good make manufacturer and finish complete & operational in all respects.
27	SOFTENING POINT APPARATUS (RING & BALL METHOD) The test apparatus must be as per IS1205 ASTMD36 relevant specifications, for determination of softening temperature of bitumen, using ring and ball method Equipment must have built in heating facility magnetic stirrer and temperature controller Apparatus must be operational for 220V, 50Hz, Single Phase AC Supply. Equipment must be of superior make/manufacture and Finish, COMPLETE IN ALL RESPECT.
28	DUCTILITY APPARATUS (ELECTRICALLY OPERATED WITH COOLING ARRANGMENT) The test apparatus must be as per IS 1208/ASTMD 113 relevant specifications, for determination of ductility of bitumen using control elongation (constant speed) by way of ductility machine Equipment must have built in water bath with heating facility using electric pump circulator and heater Equipment must be supplied with ductility moulds and base plates for testing three samples simultaneously. Apparatus must be operational for 220V, 50Hz, Single Phase AC Supply. Equipment must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT.
29	CONSISTENCY TEST APPARATUS The test apparatus must be as per IS: 2720 Part-5, IS: 9259 relevant specifications, for determination of consistency (Liquid Limit) of soils by Casagrande Method The apparatus must be manually operational with counter with IS/BS/ASTM Grooving Tools, Gauging Block. Equipment must be of Good make/manufacture and finish (COMPLETE & OPERATIONAL IN ALL RESPECTS).
30	SAND REPLACEMNT FIELD DENSITY APPARATUS (SMALL) Field Density Equipment using Sand Replacement Method (Small) must be supplied as per IS: 2720 Part -28) with following parts: 1) Sand pouring cylinder fitted with Conical Funnel and Shutter capacity 3 Ltr (1-No). 2) Cylindrical Calibration container 100mm IDX150mm height (1-No). 3) Metal Tray Size 30x30x4cm with 10cm central hole (1-No) Equipment must be of superior make/manufacture and Finish, COMPLETE IN ALL RESPECT.
31	Universal Penetrometer with Penetration cone & Bitumen Penetration Kit (IS: 1448 (Part 60). ASTM: D 937, IP: 179, BS:4698, ASTM: D 217, IP: 50, ISO: 2137, EN:1426, 13179-2). Equipment must consist of following replicable parts a) Universal Penetrometer with adjustable head and display (1 No) b) Penetration cone for determination of consistency of lubricating grease and Oils (1 No) C) Bitumen Penetration Kit consisting of penetration needle. copper transfer dish, aluminum containers (1 No) d) Penetration test cone for soils, with cups (1 No). Equipment must be of Good make/manufacture and finish. (COMPLETE & OPERATIONAL IN ALL RESPECTS)
32	Los Angeles Abrasion Testing machine with abrasive charge IS standard 1S10070 To determine the resistance to wear off small size coarse aggregage crushed rocks, detachable shelf. drum rotation 30-33 RMP with electric motor and heavy duty reduction gear Supplied with tray for collection of material, operation suitability 415V, 3 Phase, 50 HZ, Ac Supply Abrasive charge set of 12 hardened 48mm dia Digital controller box Equipment must be of Good make/manufacture and finish. (COMPLETE & OPERATIONAL IN ALL RESPECTS)
33	CLEVELAND Flash (Open) & Fire point Apparatus (As per specification of IS 1448, P. 69. IS. 73-2013). Equipment must be capable for determining flash & fire point or Bitumen The flash cup must be made of brass with insulated handle. Equipment must have a metal heating plate electrically operated with orgy regulator & gas jet assembly . (COMPLETE IN ALL RESPECTS with all operational accessories).
34	ABSOLUTE (DYNAMIC) & KINEMATIC VISCOSITY APPARATUS (As Per IS Specificatios1206 Part-II & Part-III, IS:73-2013) Equipment must consist of following: a)      2-No Imported Viscometer Tubes (Cannon-Manning Vacuum Viscometer) made of borosilicate glass with Size No: 12 (IS: 1206-Part-II) for determination of Absolute Viscosity in the range of 300 to 8000 poise at 60oC, along with Calibration Certificate. b)      2-No Imported Viscometer Tubes (Cannon-Fenske Viscometer) made of borosilicate glass with size No: 350 (IS: 1206-Part-II) for determination of Kinematic Viscosity in the range of 30 to 500 cSt at 135oC, along with Calibration Certificate. c)       1-No Oil Free Vacuum application System with 4-Lines, with vacuum range up to 300mm of Hg, and least measurable and maintainable level of ±0.5mm of Hg. d)      3-No Mercury in glass tube type thermometer with range of 0oC to 150oC, Scale ± 0.2oC (As per IS: 1206-Part-II) e)      1-No Viscometer Silicon Bath, with uniform temperature maintenance system, using Accurate PDI Temperature Controller with accuracy of ± 1oC, for conduction of Absolute & Kinematic Viscosity Test on bituminous and cut-back material by vacuum capillary method at specified temperatures. (COMPLETE & OPERATIONAL IN ALL RESPECTS with all optional accessories).
35	PAVEMENT DEPTH/THICKNESS GAUGE MS Thickness Gauge with minimum gauging depth of 150mm (COMPLETE & OPERATIONAL IN ALL RESPECTS)
36	SOIL Hydrometer(As per Ref. standard IS: 2386) ( For Determination of Specific Gravity of Clays, sands, and gravels of grains size < 10mm.) Equip,ment must consist of 1-Kg/1 Liter superior glass bottles, with board brass cone stopper, with locking ring and rubber seal. ( COMPLETE & OPERATIONAL IN ALL RESPECTS)
37	Density Bottle (As per Ref Standard IS 2720, Part-1 It must consist of following capacity Superior laboratory glass bottles, with capillary vent, leak proof, stopper a)      25ml--------15 No b)      50ml--------15 No c)       100ml------15 No (COMLETE INALL RESPECTS with all optional accessorties)
38	TABLE MOUNTED MARSHALL’S STABILITY APPARATUS (As per IS/ASTM D-1559, D-6927 spectification) Equipment must consist of Marshals stability Loading frame 50KN capacity ( With proving Ring), Single Speed with platen speed of 50.8mm/mm ( Precise speed), suitable to operate on 220V, 50HZ, single phase AC-supply,Limit switch protection for both upward and downward travel, Following must be supplied with the apparatus: a)      Marshall’s Steel compaction Hammer, weight 4.5 Kg, with a free fall of 457mm (2-No). b)      Compaction moulds (10.16cm dia and 7.6 cm height, for 25.4mm maximum nominal aggregate size) of steel- cylindrical, with individual extension collar and base platles (6-No). c)       Hydraulic Sample Eject (1-No). d)      Sample Breaking Head with load transfer bar and flow measurement arrangement using dial-gauge. e)      Compaction pedestal comprising of steel plate capped shall wooden post. Equipment must be of Good make/manufacture and finish. (COMPLETE & OPERATIONAL IN ALL RESPECTS)
39	HYDRULIC LOADING APPARATUS FOR LOAD TESTS (2000 KN) For conducting pile Load Test as per IS specification/SP-36,IS: 1888, IS: 3014. HYDRAULIC JACK AND PUMPING UNIT Equipment must include only Hydraulic Jack,2000kN (200 MT) capacity,along with calibrated 2000kN (200 MT), 1000kN (100 MT) & 500kN (50 MT) capacity pressure gauge with suitable least count.Equpiment must include heavy duty hand operated remote Hydralic pumping Unit , Hihg pressure flexiable pipie (at least5m)the hydraulic jack must be provided with a piston travel/strokeatleast 150mm or higher,The supply shell include (4-No) magnetc bases,with adjustable long extensions for holding dial gauges for measurement of displacement.Superior (baker) Mechanical Deflection dial gauges (04-No) of 0.01-50mm working range. Equipment must be of superior make/manufacture And finish,COMPLETE IN ALL RESPECTS.
40	Analog Electricity Operated CTM 1000kN compression Testing Machine Confirm to IS:14858 with +-1% accuracy Loading range:1000kN (100 T), with L.C 5kN Maximum clearance between platens:390mm Maximum clearance between side platens: 260mm Platen size:222 mm dia Platen hardness:612 HV (55 HRC) Piston Dia:157 mm Piston stroke:50mm Motor HP:1 Motor make:GODREJ or Crompton greaves Power requirement:220 V/230 V,1 phase, 50 Hz, Ac supply Spaciman size:100mm,150mm cube,100mm &150mm dia cylinder Standards:IS:516& IS:14858. Pumping unit to be electrical operated, Unique features are Calibration with 1% of full scale deflection with trace ablity to NABL. Powder coated finshed surface Front gate for protection Pump withbrass casing.The complete unit compromises of Loading unit is fully welded construction having a cross-head with a spherical seated platen the lower platern is attached to the top of the piston .Cubes upto 30mm & cyllineres upto 300mm dia x300mm heigh can be testyed using the approvpriate models. Contineous Voltage Transformer (CVT) Note with NABL Calibration. Equipment must be of superior make/manufacturere and finish, complete in all respect.
41	California Bearing Ratio Apparatus (As Per Specifications of IS:9669, IS:2720-XVI, etc) Specification of CBR Moulds. The materials for construction of the various equipment shall be as given in above standard. Mould- The Mould dia. shall be 150mm Collar- The collar shall be made from same material as that of mould. Two similar ears as in the case of the mould shall be cast integral with the body or welded. Base Plate- A suitable seating about 2 mm deep shall be provided on the top face for proper seating of the mould. Equipment must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT.
42	SOIL COMPACTION APPARATUS As per Specifications/Ref. Standard of IS: 10074 (Part VII), IS: 2720 (Part 7), IS: 9198. Equipment must consist of following for performing tests to determine density moisture relations for soils. a)      Standard Compaction Apparatus (Light Compaction/Standard Proctor) consisting of 1000 ml volume gum-metal mould,100mm dia. (ID) 127.3mm height. b)      Base Plate & Collar, c)       Hammer of 2.6kg with 310mm fall. (Equipment must be superior make/manufacture and finish, COMPLETE IN ALL RESPECTS)
43	SOIL COMPACTION APPARATUS(Modified) As per IS: 2720 (Part 8), IS: 9198, IS: 10074. Modified Compaction mould in mild steel (Heavy Compaction/Modified Proctor) consisting of 2250ml volume mould, 150mm diameter and 127.3mm height, rammer/Hammer weight of 4.9 Kg with controlled free vertical fall of 450mm, with 50mm diameter of compaction face/end, with base plate and color. Equipment must be superior make/manufacture and finish, COMPLETE IN ALL RESPECTS
44	Dynemic Cone Penetrometer (CBR) is used for rapid in situmeasurement of the structural properties of existing road pavement constructed with unbound materials. The unit incorporates an 8 kg weight with a drop of 575 mm and a 20 mm diameter cone fitted to the end of the shaft allowing measurements to be made down to a depth of approximately 850 mm 8 kg weight dropping mass trough a height of 575 mm Anvil with driving rod Penetration road with 60 degree 20mm dia cone spanners, Tommy bar bottle of adhesive All contained in carrying case Case dimension 1200x350x200mm appox. Weight: 30kg
45	(Cement Mortar Cube moulds) Cube Mould of 70.6 mm size conforming to IS 10086 1982 Supply must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT
46	Compaction Factor Apparatus (AS per IS 5515). The apparatus shall consist of two conical hoppers mounted above a cylindrical receiver. The hoopers shall be of rígid construction true to shape and finished smooth inside. They shall be made of cast brass conforming to IS: 292-1961" or cast-iron of grade 20 conforming to IS 210-%97$$. Brass sheet at least 3 mm thick Receiver The cylindrical receiver shall be of rigid construction, true to shape and finished smooth inside. It shall be made of cast brass or cast iron. The top edge shall be accurately machined normal to the cylindrical axis Frame the frame shall be of rigid construction Weldedriveted rolled structural sections would be suitable Accessories The apparatus shall also include two ordinary trowels having a steel blade of 200 mm in length with straight edge, a hand scoop about 150 mm long, a 16 min diameter and 600 mm long steel tamping bar with a rounded working end and scales (or a balance ) to weigh up to 25 kg to the nearest 10 g Equipment must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT.
47	Bouyancy Balance The Buoyancy Balance consists of a rigid support Frame, incorporating a Water Tank mounted on a platform. A mechanical lifting device is used to raise the Water Tank thru the Frame height immersing the specimen suspended below the balance. The model operates with an electronic Top-pan programmed balance of 15 kg capacity readable to 0.5 g The support frame comprises a welded steel frame on top of which is mounted the top loading flat pan balance A cantilever platform to support the immersion tank is elevated by a chain attached to it and operated by a manually operated ratchet mechanism The unit incorporates an immersed weighing tank mounted on a platform, which can be elevated by a manual action ratchet lifting gear to allow the test specimen to be weighed in air and weighed in water using the same balance.
48	Laboratory Electric Hot plates: Equipment must comprise of following minimum Specifications 1) SS/MS Top with size of 450mmx600mmx150 mm (with dimension allowance of ±10mm) 2) Thermostal Control and Regulator 3) Energy Consumplion up to 2 KW. Operational at 220V ±10V, Single Phase, 50Hz, AC (Equipment/Supply must be of superior make/manufacture and finish. COMPLETE IN ALL RESPECT)
49	Automatic controlled Single Phase Stabilizer(10KVA) As per IS Specifications IS 9815. Equipment must be indoor floor mounted single phase automatic (copper wound) I/P range90V to 300V, single O/P of 230±.4%, frequency 50-60HZ.Air cooled construction with U/V. O/V, O/L protection system Equipment must have working temperature rangle -5 degree Centigrade to 50 degree Centigrade, 95% RH with proper insulation resistance, including necessary supply of quality oil. Equipment/Supply must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT)
50	Miscellaneous items/Glass ware/Consumable items/Safety Equipment
51	a)    Superior Quality Borosilicate bottles of 50ml Capacity with capillary bored glass stopper, for determination of Specific Gravity of Soil/Bitumen/Powders etc.
52	b)    Heat Resistance safety glove of superior quality.
53	c)    Natural high grade pigmented heavy duty latex hand gloves of medium size.
54	d)    Laboratory Appron of superior make
55	e)    Medium size SS Scoops/Trowels
56	f)     Superior quality and make Heavy-Duty LED flash light with chargeable battery.
57	g)    Superior Quality Masks
58	h)    Knifel Spatula.
59	i)      Trichloroethylene.
60	j)      Glass Beaker 1 Liter Capacity
61	k)    General Tool Box
62	l)      SS Container (1-liters) with lids
63	m)  Disposable Aluminum Foil Container
64	n)    Traffic Diversion Cones (Delineators)
65	o)    SS Moisture Containers with lids