Pressure Die Casting Machine Pressure Die Casting Machine , Pressure Die Casting Machine , Pressure Die Casting Machine: Locking Force : 80 Tonnes Size Of The Die Plates : 520 X 520 Mm Space Between Tie Bars : 330 X 330 Mm Die Opening Stroke : 200 Mm Ti

Sharing tender

Pressure Die Casting Machine Pressure Die Casting Machine , Pressure Die Casting Machine , Pressure Die Casting Machine: Locking Force : 80 Tonnes Size Of The Die Plates : 520 X 520 Mm Space Between Tie Bars : 330 X 330 Mm Die Opening Stroke : 200 Mm Tie Bar Diameter:60 Mm Max. Die Thickness : 400 Mm Min Die Thickness : 200 Mm Injection Force-Adjustable ( With Intensifier ) :6.7-9.5 Tonnes Ejection Force:2.5 Tonnes Ejector Stroke:50 Mm Motor : 7.5 K.W. Injection Plunger Stroke:250 Mm Capacity Of Oil Tank : 300 Litres Machine Weight : 3.6 Tonnes Pressure Die Casting Machine: Locking Force : 80 Tonnes Size Of The Die Plates : 520 X 520 Mm Space Between Tie Bars : 330 X 330 Mm Die Opening Stroke : 200 Mm Tie Bar Diameter:60 Mm Max. Die Thickness : 400 Mm Min Die Thickness : 200 Mm Injection Force-Adjustable ( With Intensifier ) :6.7-9.5 Tonnes Ejection Force:2.5 Tonnes Ejector Stroke:50 Mm Motor : 7.5 K.W. Injection Plunger Stroke:250 Mm Capacity Of Oil Tank : 300 Litres Machine Weight : 3.6 Tonnes Production Data: Plunger Diameter In Mm : 55 Shot Capacity For Al Inkgs : 1.06 Max. Injection Pressure In Kgs / Cm2 :490 Nom. Casting Area At Above Injection Pressure In Cm2 : 163 • Permissible Variation In All Dimension = ± 7% Standard Machine Features: 1 ) Double Pump Directly Coupled To 3-Phase Electric Motor 7.5 K.W. Built-In Motor Switch With Thermal Overload Relay. 2 ) Complete Hydraulic System With Independent Regulation For Speeds And Pressure Of Closing, Injection And Ejector Unit. 3 ) Gas Cylinder For Nitrogen ( Empty ) Including Flying Piston Type Accumulator 4 ) Oil Tank Formed By Machine Base, Capacity 300 Liters, ( Empty ) , Including Oil Level Gauge And Temperature Gauge. 5 ) Built-In Oil Cooler For Cooling Of Hydraulic Oil. 6 ) Water Cooling System For Cooling Of Injection Plunger And Fixed Platen. 7 ) Complete Cold Chamber Injection End With Horizontal Injection Cylinder And Direct Injection System, Including Slow Initial Phase, Fast Injection Phase And Final Squeezing Phase With Intensified Pressure. 8 ) Hydraulic Height Adjustment Device To Adjust Injection Cylinder To Centre And Off-Centre Injection Position With Position Mechanical Stop. 9 ) Manually Operated Locking Wedge For Each Tie Bar Nut On Rear Platen For Quick Adjustment Of Toggle Mechanism For New Die Height. 10 ) Hydraulic Ejector Including Ejection Table And Speed Control Valve. , Al And Non Ferrous Melting Induction Furnace Material Loading Capacity : 50 Kg And Above Maximum Temperature In Degree Celsius: 500 And Above Power : 50 Kw Or Above Frequency : 50 Hz Voltage: 360-400 Voltage, Three Phase , Family Die , Steel Almirah ( 1800*910*486 Mm ) 0.8 Mm Thick Sheet , Two Sets Of Office Table ( 3.5’X 3.0’X 2.5’ With Melamine Polished ) And Chair ( Cushioned With Arms Revolving System ) Of Standard Size , Fixing And Mounting Of Machine Including Civil And Electric Works , Accessories Set Of Tools And Other Essential Equipment , Testing Material 150 Kg Aluminum / Non Ferrous