|
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of debris outside the Md land complete. |
| 2 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris outside the Md land complete. |
| 3 | Dismantling of fencing wire mesh any type complete all as specified. |
| 4 | Dismantling of post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground complete. |
| 5 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and neatly stacking at site where directed. |
| 7 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etclaid bedded and pointed in any mortar complete including removal of entire debris as ordered outside MD land complete all as directed. |
| 8 | Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance exceeding 500 m and making good surface. |
| 9 | M&L for PCC1:3:6, type C2 using 40 mm gradedcrushed stone aggregate as in foundation filling and mass concrete complete all as specified. |
| 10 | M&L pre-cast PCC 1:3:6, type C1 (using 20 mm gradedaggregate) as in block masonry with solid building blocks or slaps 10 cm thick (with plain or interlocking joints as directed ) set and jointed in cement mortar 1:4 , complete |
| 11 | M&L for Providing precast cement concrete type B0 1:2:4 (using 12.5mm graded aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mould-ings but excluding frame set in cement mortar 1:4 complete all as specified. |
| 12 | M&L, cement concrete1:2:4, type B-0 (using 12.5 mm graded stone aggregates) as in copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork etc., complete. |
| 13 | M&L for Precast cement concrete Type B1, 1:2:4 (using 20 mm graded aggregate) as in rubber moulded kerb stones of size and Shape as approved by AO, set and jointed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 14 | M&L pre-cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with factory made solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified. |
| 15 | -Ditto- all as per item No 14 here-in-above but except block. |
| 16 | M&L, Reinforced cement concrete, 1:1½:3 type A1 Nominal mix (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified. |
| 17 | M&L, Reinforced cement concrete, 1:1½:3 type A1 Nominal mix (using 20 mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified. |
| 18 | Cutting holes in brick works of size exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TypeB-1 as required including making good as per its original specification with out any extra costcomplete all as directed. |
| 19 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred, stopped, ends etc all as specified. |
| 20 | Supply only water proofing compound |
| 21 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, complete all as specified. |
| 22 | Use & waste of formwork to sides of pillars, posts, peirs, columns and stanchions rough finished surfaces of concrete, square rectangular or polygonal, complete all as specified. |
| 23 | Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete. |
| 24 | Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 25 | S&F mild steel work in hard rails, winds ties post and structs in fencing screwed or welded to shaped as dirested , including all necessary drilling ,bolting or riveting etc, and similar work confromingFe-290 Gde-E-165. |
| 26 | S&F rolled MS in framed work as in integrated doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165. |
| 27 | All as per item No 26 here-in-above but errection and fixing only old gates after repair work, necessary welding, pillars repairs etc. |
| 28 | S&F mild steel screw bolts of 11-15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exceeding 10 cm longcomplete all as specified. |
| 29 | Supply only MS galvanized chain link fencing (120 to 140 gms)4mm dia and 75mm spacing and weighing not less than 2.75 kg/sqm diagonally pinned including line wire rails, straining bolts and provision of binding wire complete all as specified and as directed. Make :M/s Sachin , TATA as approved. |
| 30 | Fixing only diagonally pinned fencing wire including line wire, any mesh size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as directed. |
| 31 | S&F stainless steel hand railings and itegrated Gates etc,. of grade 304 SS including designer blausters, railling pipes, size, shape and design as approved by AO, cut to length and designer balls accessories complete all as specified and directed by Engineer -in- Charge. |
| 32 | M&L 16 to 18 mm thick granite slab (Jet black) work (table rubbed, polished and rounding of edges where ever necessary as ordered) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonelaid over and including 20 mm thick screed bed in cement mortar 1:6 completeall directed and specified. (Note : Quoted rate is deemed to be inclusive of rounding of edges and cement screed) |
| 33 | M&L Machine pressed coloured chequered cement concrete tiles of size 300x300x25 mm thick (confirming to IS: 13801-1993 and shall contain ISI mark) machine pressed with grey cement and pigments, set and jointed in neat cement slurry in floors and pointed with coloured cement to match the shade and laying on 15 mm thick screed bed in CM 1:6 complete all as specified.(Note: i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work) |
| 34 | M&L M-35 grade, 60mm thick machine pressed precast cement concrete interlocking paver blocks any shape and size with grey cement and pigment confirming to IS: 15658-2006, laid over and including 50 mm thick compacted sand cushion complete complete all as specified.(Note : Quoted rate is deemed to be inclusive of 50 mm thick compactedsand cushoning). |
| 35 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cementmorter 1:4 surfaces finished even and smooth without using extra cement complete all as directed.. |
| 36 | M&L for rendering 15 mm thick on Brick masonry surfaces other than fair faces of brick work in cement mortar 1:6 finished smooth and even without using extra cement (Internal) complete all as directed.. |
| 37 | M&L rendering in CM 1:4, 20 mm thick on fair faces of brick work/ block or concrete surfaces finished fair and even without using extra lime or cement including water proofing compound @ 2% by the weight of cement(external) complete all as specified. |
| 38 | M&L for rendering 10 mm thick in CM 1:3 on ceiling surfaces of roof projection /chajjas upto 9 mtr height finishing even and smoot w/o using extra cement complete all as specified and as directed. |
| 39 | M&L for preperation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified. |
| 40 | M&L preparation of new plastered surfaces of wallsand applying 2 coats of oil bound distamper emulsion overa a 2 mm thick wall care putty |
| 41 | M&Lpreparation of new plastered surfaces of wallsandapplying two coats of cement base painton newly plastered walls complete all as specified. |
| 42 | M&L for complete removal of existing painted surface of walls andapplying two coats ofcement base paint complete all as directecd. |
| 43 | M&L for two coats of weather proof anti-fungal Exterior Acrylic Emulsion paint on new kerb stone surfaces over a priming coat of same Emulsion as ordered complete all as directed. |
| 44 | M&L for newly plastered surface of walls & applying two coats of acrylic emulsion paint having alkalie & anti fungal resistance, dirt resistance exterior paint of required shade with silicon aditives over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm as per manufacture\"s instructions complete alas directed. . |
| 45 | M&L Preparation of Old painted of wall including cornices (Plastered/unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and appying one coat of White wash on ceiling. |
| 46 | M&L for complete removal of existing treatment and applying three coat of white wash on ceiling complete all as specified. . |
| 47 | M&L for complete removal of existing treatment by mechanical means (any no of layers) , Washing, rubbing down and stopping of any painted surfaces of wall surfaces complete and applying two coats of cement base painton walls complete all as specified. |
| 48 | M&L for complete removal of existing treatment by mechanical means (any no of layers) , Washing, rubbing down and stopping of distempered and painted surfaces of wall surfaces complete and applying two coats of acrylic emulsion paint having alkalie & anti fungal resistance, dirt resistance exterior paint of required shade with silicon aditives over and including priming coat of exterior primer applied@ 0.90 ltr/10 sqm as per manufacture\"s instructions complete alas directed. . |
| 49 | M&L for complete removal of existing treatment by mechanical means (any no of layers) , Washing, rubbing down and stopping of distempered and painted surfaces of wall surfaces complete and applying 2 coats of oil bound distamper emulsion overa a 1 mm thick wall care putty complete all as directed. |
| 50 | Complete removal of existing treatment and applying 2 coats of oil bound distamper emulsion over a 1 mm thick wall care putty as in ceiling complete all as specified and directed. |
| 51 | M&L Preparation of Old painted of wall including cornices (Plastered/unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and appying one coat of cement base paint be mechanical means/ auto roller including filling undulation with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 52 | M&L Preparation of Old painted of wall including cornices (Plastered/unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and appying one coat of Antifungal exterior paint by mechanical means/ auto roller including filling undulation with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 53 | M&L Preparation of Old painted of wall including cornices (Plastered/unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and appying one coat of oil bound distemeper be mechanical means/ auto roller including filling undulation with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 54 | M&L Complete removal and applying tow coat of plastic emulsion paint in textured/ decorative pattern over a coat of primer and over a coat of 1 mm thick white cement based putty on wall complete all as specified . |
| 55 | M&L Complete removal and applying tow coat of plastic emulsion paint in over a coat of primer and over a coat of 1 mm thick white cement based putty on wall complete all as specified . |
| 56 | M&LPreparation of Old painted of wall including cornices (Plastered/unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and appyingone coat of plastic emulsion paint over a coat of primer and over a coat of 1 mm thick white cement based putty on wall complete all as specified . |
| 57 | M&L for preparation of old decorative wall including cornices (plastered / unplastered) of any description, including rubbing, scrapping by hand held sander / long handle sander and washing and applying one coat of acrylic emulsion paint on Kerb stone / decorative wall in alternate panels complete all as specified and directed by Enginner -in-charge. |
| 58 | M&L for complete removal of existing treatment and applying two coats of Exterior Acrylic Emulsion paint over Kerb stone/ Decorative wall in alternate panels having alkalie and antifungal resistance, dirt resistance exterior paint of required shade as approved by AO with silicon aditives over and including priming coat of exterior primer applied 0.90 Ltr / 10 Sqm complete all as specified and directed by Enginner -in-charge. |
| 59 | M&L for Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation ofnew steel surface complete all as directed. |
| 60 | M&L for Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over not exceeding 10 cm in width or girth when unconnected with other painting or when painted in a different tint including necessary preparation ofnew steel surface complete all as directed. |
| 61 | M&L for preparing oldwoodensurface of any description not otherwise described over 10cm width or girth and applyingone coats of synthetic enamel paint to match the existing surfaces. |
| 62 | M&L for preparing old painted surface steel surface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer. |
| 63 | M&L for preparing oldsteel surface of any description not otherwise described over 10cm width or girth and applyingone coats of synthetic enamel paint to match the existing surfaces. |
| 64 | Supply onlyinstantready mix premixed bitumunious materialconsisting of granular material 5-20 mm crushed stone aggregrate with 5.5% of paving bitumen in 25 Kg sealedBags. Make : Shali Patch of STP or equivalent as aprroved. |
| 65 | M & L for repair to entire or part width of damaged bituminious road surface with 40 mm thick instant ready mix premixed bituminious material after preparation of surface including well ramming tomatch withthe eixiting surface of roadcompleteall as directed.(Note : Instant Ready Mix premixed bituminious material obrtained from itemNo 64 here-in-above) |
