Under Jal Jeevan Mission Programme Nanhave Water Supply Scheme Tal. Chandwad Dist.Nashik
Tender Value
48.33 Lakhs
Estimated cost
Bid Submission
21 Feb 2022
0 days left
EMD
49000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chandwad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Under Jal Jeevan Mission Programme Nanhave Water Supply Scheme Tal. Chandwad Dist.Nashik
BOQ
| Sl. No. | Item Description |
| 1 | Sub Work No. 1 - Deepening OfWellItem No. 1 - Excavation in general in soft material comprisingof soft soil, soft murrum, sand, hard murum with boulders in wet or dry condition for Head Works I.e. intake well, connecting pipe Jack well, pump House, supply well etc. for lift\"0 to 1.5 M & lead \"of 1.50Mincluding barricading, guarding, depositing oft surplus excavated stuff within a radius of 0.5km as directed by Engineer-in-charge-,etc \"complete excluding refilling. Hard Strata Lift 15.00 To 16.50 M |
| 2 | Lift 16.50 To 18.00 M |
| 3 | Item No. 2 - Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.Note :- 1) The Contractor at his request may allowed to start construction of masonary steining so as not to allow silting of well in oncoming mansoon and while paying masonary, 25% amount shall be withheld and released only when excavation to the full depth is completed.2) Total dewatering charges are to be proposed in tender as lumpsum amount and 75 % is payable for excavation and 25% is payable for construction of well /gallery. Out of 75 % excavation breakup shall be as under 25 % for last 1 Mtr. Depth., 20% for 2 M depth which just above last 1 M depth. 15% for the rest of depth from water table level. The aboe conditions will restrict the tendancy of agencies to avoid deeping of wells etc. to the required depths. |
| 4 | Item No. 3 - Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed desings and drawings or as directed by Engineer-in-charge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted /welded connections and one coat of anticorrosive paints and over it two coats of oil painting, etc. complete. ISMB 150 X 80 @ 14.90 Kg/m |
| 5 | Item No. 4 - Drilling of Horizontalbore well 150 mm dia by D.T.C. machine, including transportation of machine at work site |
| 6 | Item No. 5 - Carrying out recuperation / yeild test for ascerting the discharge of constructed well / excavated profile as direrted by Engineer in charge.The test carried out by drawing down water from the well/ profile below normal / subsoil water level upto full depth rise in water level is recorded. The normal water level / subsoil water level in the well / profile as well as strainer / suction level at pump as per design of W.S. scheme shall be recorded prior. to the test including cost of all materials.overhead,labours etc. completed as directed. The test shall be carried out as per technical circular No.2597 dt. 20/11/97 and shall be carried out for 7 days. |
| 7 | Sub Work No. 2 - Pumping Machinery Item No. 1 - Providing and erecting and giving test of 100 mm dia submersible pump sets conforming to IS 8034 and motor conforming to9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and bronze impelier .Motor suitable for working on 415v+10% ph 50hz A.C supply with cable guard ,thrust carbon /bed bearing to with stand with cable entire hydraulic thrust,waterproof winding shall be provided .The pump set shall be suitable for direct coupling ,pump shall have suitable out let as per manufactures design ,Anti thrust stream lined non return valve shall be provided with the pump .Suitable valve shall be provided with the pump .Suitable suction strainer shall also be provided .3 core ,single /double run copper conductor submersible type of flat cable 3 m and 2 pairs of erection 65 mm width 10 mm be provided along with thepump rates per pump up to 8 stages are as below. 5 HP Pump Sets |
| 8 | Item No. 2 - Supplying and erecting G.I.Pipe \"B\"Class in position for suction, delivery for centrifugal Pump, vacuum pump and drop for submersible pump including plumbing with socket and necessary material G. I. Pipe 65 mm dia \"B\" Class. |
| 9 | Item No. 3 - 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable. Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. (3 Core 6 Sqmm) |
| 10 | Item No. 4 - Providing and fixing M. S. clamps for Holding G. I. Pipe |
| 11 | Item No. 5 - Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. Automatic Control Panel Board |
| 12 | Item No. 6 - Providing tools for pumping ( Tools as per rate analysis included in sanctioned estimate.) |
| 13 | Item No. 7 - Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cable. Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. |
| 14 | Item No. 8 - Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP |
| 15 | Sub Work No. 3 - Pure Water Rising Main Item No. 1 - Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.80 mm dia GI B Class |
| 16 | Item No. 2 - Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 90 mm dia 6 Kg/cm2 PVC Pipes |
| 17 | Item No. 3 - Providing G.I / PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only. |
| 18 | Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 80 mm dia PN 1 |
| 19 | Item No. 5 - Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Reflux Valve 80 mm dia PN 1 |
| 20 | Item No. 6 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 80 mm dia PN 1 (For Washout) |
| 21 | Item No. 7 - Providing and supplying Air valve as per IS 14845-2000and MJP Std Specification of approved make and quality of following dia including all taxes ( Central and local ) rly frieght inspection charges unloading from rly wagon loading in to truck transportatin upto Dept store/ site unloading and stacking etc complete Air valve 25 mm dia PN 1 |
| 22 | Item No. 8 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Soil |
| 23 | Item No. 9 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. HMB |
| 24 | Item No. 10 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Soft Rock |
| 25 | Item No.11 - Excavation for foundation/ pipe trenches in All Types of Strata including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Hard Rock |
| 26 | Item No. 12 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete. |
| 27 | Item No. 13 - Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.80 mm dia GI B Class pipes |
| 28 | Item No. 14 - Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint).90 mm dia 6 Kg/cm2 PVC Pipes |
| 29 | Item No. 15 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Sluice Valve 80 mm dia |
| 30 | Item No. 16 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Reflux Valve 80 mm dia |
| 31 | Item No. 17 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Sluice Valve 80 mm dia for Washout |
| 32 | Item No. 18 - Lowering, Laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. (for all class of valves).Air valve 25 mm dia |
| 33 | Item No. 19 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.1:2:4 (M-150 ) grade for encasing |
| 34 | Item No. 20 - Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines. |
| 35 | Item No. 21 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion15 cm thick slab,etc.complete as directed by Engineer-in-charge. Size 0.90 X 0.60 X 1.20 M |
| 36 | Item No. 21 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 37 | Sub Work No. 4 - Distribution SystemItem No. 1 - Providing ISI mark G.I. pipe of following class and dia. Including all local and central taxes, octroi, inspection charges, transportation to stores, etc. complete .as per IS 1239/200480 mm dia GI B Class |
| 38 | Item No. 2 - Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 110 mm dia 4 Kg/cm2 PVC Pipes |
| 39 | 90 mm dia 4 Kg/cm2 PVC Pipes |
| 40 | 75 mm dia 4 Kg/cm2 PVC Pipes |
| 41 | Item No. 3 - Providing G.I / PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only. |
| 42 | Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 80 mm dia PN 1 |
| 43 | Sluice Valve 100 mm dia PN 1 |
| 44 | Item No. 5 - Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, prepering the bed for foundation and excluding backfilling, etc. complete. soil |
| 45 | Item No. 6 - Excavationfor foundation / pipe trenches inHard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. HMB |
| 46 | Item No. 7- Excavation for foundation / pipe trenches insoft rock & old cement & lime masonry foundation asphalt road , including removing the excavated material upto a distance of 50 M beyond areaand lifts as below, stacking and spreading as directed, normal dewatering, prepering the bed for foundation and excluding backfilling, etc. complete. Soft Rock |
| 47 | Item No. 8- Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. Hard rock |
| 48 | Item No. 9 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete. |
| 49 | Item No. 10 - Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.80 mm dia GI B Class pipes |
| 50 | Item No. 11 - Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint). 110 mm dia 4 Kg/cm2 PVC Pipes |
| 51 | 90 mm dia 4 Kg/cm2 PVC Pipes |
| 52 | 75 mm dia 4 Kg/cm2 PVC Pipes |
| 53 | Item No. 13 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Sluice Valve 80 mm dia |
| 54 | Sluice Valve 100 mm dia |
| 55 | Item No. 12 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.PCC 1:2:4 (M-150 ) grade for encasing |
| 56 | Item No. 14 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 57 | Item No. 15 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion15 cm thick slab,etc.complete as directed by Engineer-in-charge. Size 0.90 X 0.60 X 1.20 M |
| 58 | Sub Work No. 7 - Trial RunItem No. 1 - Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Trial Run for 3 Months |
| 59 | TCL Requirement |
| 60 | MSEB charges |
| 61 | Provision for MSEB Charges |
AI Tender Summary
Tender Timeline
Feb 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender