Military Engineer Services-MES has published Repairs / Maintenance Of Roadway Luminaries, High Bay Security Lights Along With Connected Accessories At Dinjan Mil Stn And Out Pocket Area And Repairs/ Replacement Of Internal Repairs / Maintenance Of Roadway Luminaries, High Bay Security Lights Along W. Submission Date for this Tender is 05-03-2022. Electrification Work Tenders in dinjan Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Feb-2022 | REVISED BOQ | BOQ | 05-03-2022 |
| Sl. No. | Item Description |
| 1 | Taking down carefully unserviceable aluminium/copperpoint wiring (light, fan, socket or power) complete, (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 2 | M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box (sunken type) 3mm thick hylam sheet cover fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed. |
| 3 | All as per item No 02 above but for one 3 pinsocket outlet, 6 Amps on Independent board complete all as specified and directed. |
| 4 | All as per item No 02 above but for one 6 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and as directed. |
| 5 | All as per item No. 02 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 6/16 Amps switch socket combination on Independent board complete all as specified and as directed. |
| 6 | M&L for concealed point wiring with 1.5 Sqmm (nominal area), FR PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) completewith and including 1.5 Sqmm (nominal area) FRPVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point terminated in metal flush box of suitable size for mounting switches, sockets, regulators etc including cutting chases and making good by using cement mortar 1:4 complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed. |
| 7 | All as per item No 05 above but for one 3 pinsocket outlet, 6 Amps on Independent board complete all as specified and directed. |
| 8 | All as per item No 05 above but for one 6 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and as directed. |
| 9 | All as per item No. 05 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 6/16 Amps switch socket combination on Independent board complete all as specified and as directed. |
| 10 | S&F for switch piano, 6 Amp single pole, flush type one way 230 volts bearing ISI marked complete all as specified and as directed. |
| 11 | S&F for socket outlet, 2 in 1, 3 pin, 6 Amps, flush type bearing ISI marked complete all as specified and as directed. |
| 12 | S&F for switch socket combination, 2 in 1,6 Amps,flush type, 240 volts bearing ISI marked complete all as specified and as directed. |
| 13 | S&F for switch socket combination, 2 in 1, 6/16 Amps, 240 volts, bearing ISI marked flush type complete all as specified and as directed. |
| 14 | S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed. |
| 15 | S&F for stepped type(five steps) electronic fan regulator flush typecomplete all as specified and as directed. Make : Model No. 14502 of Anchor or equivalent make. |
| 16 | S&F for bell push, flush type, 5 Amps 230 Volts, bearing ISI marked complete all as specified and directed. |
| 17 | S&Ffor call bell,AC, 230 volts, single pole complete all as specified and directed. |
| 18 | S&F for 18 watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. Make : Havells/Philips/Bajaj/CG/Century. |
| 19 | S&F for 10 watt recess mounted pressure die-cast LED aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting-opening of ceiling any type & fixing arrangement for light fitting complete all as specified and directed. Make : 10W LED, model No LHEBLDP7IN1W010 of Havells/ Philips/ Bajaj/CG/Century. |
| 20 | S&F for 25 watt LED building security light new generation energy saving and environtal friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 including all fixing arrangement complete all as specified and as directed. Make : Havells/Philips/Bajaj/CG/Century. |
| 21 | S&F for 9 watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and directed. Make : Havells/Philips/Bajaj/CG/Century. |
| 22 | S&F for 10 watt LED down light surface mounting square type PDC aluminium housing, soft diffused lighting hight 32mm colour temperature 6000K complete all as specified and directed. Make : Cat No INTEGRANEOSURFACEDLS10WLED83OS of Havells/ Philips/ Bajaj/ CG/ Century. |
| 23 | S&F for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 24 | S&F for LED lamp 9 Wattcomplete all as specified and as directed. Make : Havells /Philips/Bajaj /Surya |
| 25 | S&F for LED lamp 9 Wattcomplete all as specified and as directed. Make : Havells /Philips/Bajaj /Surya/Century |
| 26 | S&F for PVC rectangular block for mounting, MCB DB"s etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and directed |
| 27 | S&F for PVC rectangular block for mounting, MCB DB"s etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and directed. |
| 28 | S&F for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and directed |
| 29 | Taking down unserviceable sub-main wiring up to 10 sqmm withrigid steelconduits/PVC casing-caping including cutting chases for taking out conduits and making good disturbed surfaces complete all as specified and directed. |
| 30 | M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor(FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 31 | M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables(FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 32 | M&L for sub main wiring with two run of 2.5 sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 2.5 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor(FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed by Engineer-in-charge. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 33 | S&F in repairs switch piano, flush type, 5 Amps, single pole, one way,bearing ISI marked 240 Volts including taking down old unserviceable one complete all as specified and directed. |
| 34 | S&Fin repair socket outlet, 3/5 pin , 5 Amps, flush typebearing ISI marked including taking down old unserviceable one complete all as specified and directed. |
| 35 | S&F in repair switch socket combination 2 in 1, 5 pin, 5 Amps,flush type, bearing ISI marked 240 volts including taking down old unserviceable one complete all as specified and directed. |
| 36 | S&F in repair switch socket combination 2 in 1, 6 pin, 6/16 Amps,flush type, bearing ISI marked 240 volts including taking down old unserviceable one complete all as specified and directed. |
| 37 | S&F in repairs bell push, flush type, 5 Amps 230 Volts bearing ISI marked including taking down old unserviceable one complete all as specified and directed. |
| 38 | S&F in repairs call bell, AC 230 Volts, single pole including taking down old unserviceable one complete all as specified and directed. |
| 39 | S&F in repairs ceiling rose, 3 Terminal, PVC/polycarbonate, isolated body (with PVC box) bearing ISI marked including taking down old unserviceable one complete all as specified and directed. |
| 40 | S&Fin repair stepped type(five steps), electronic fan regulator, 220 volts, flush type including taking down old unserviceable one complete all as specified and directed. Make :Model No. 14502 of Anchor or equivalent. |
| 41 | S&F in repair modular switch 1 way 6 A, 1 Module in existing location complete all as specified and directed. |
| 42 | S&Fin repair modular switch 1 way 16 A, 1 Module in existing location complete all as specified and directed. |
| 43 | S&F in repair modular socket 6-A, 2/3 Pin combined 2 module in existing location, complete all as specified and directed. |
| 44 | S&F in repair modular socket 6 A/16 A, 2/3 Pin combined 2 module in existing location, complete all as specified and directed. |
| 45 | S&F in repair modular fan regulator step Type 120 Watt, 2 Module in existing location complete all as specified and directed. |
| 46 | S&F in repair decorative wall light fitting, City light (CITY- 1 of Havells) made up of polycarbonate, suitable for 1 x 15 Watts with 15 watt LED bulb complete with all accessories including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings complete all as specified and as dierected. Make :ModelCity - 1, Cat No LHDL02160099 og Havells/Philips/Bajaj/CG. |
| 47 | S&F in repair 10 Watt recess mounted pressure die-cast LED aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting-opening of ceiling any type & fixing arrangement for light fitting including taking down old unservicebale one complete all as specified and as directed. Mak e: 10W LED, ordering code LHEBLDP7INIW010 of Havells or equivalent. |
| 48 | S&F for 18 watt surface and wall mounting type LED batten with polycarbonate housing & integrated including taking down old unserviceable light fitting complete all as specified and as directed. Make : Havells/Philips/Bajaj/CG/Crompton/Century. |
| 49 | S&F for 9 watt surface and wall mounting type LED batten with polycarbonate housing & integrated including taking down old unserviceable light fitting. Make : Havells/Philips/Bajaj/CG/Crompton/Century. |
| 50 | S&F for 25 watt LED building security light new generation energy saving and environtal friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 including taking down unserviceable light fitting complete all as directed. Make : Havells/Philips/Bajaj/CG/Century. |
| 51 | S&F for 35 watt recess mounted deep drawn CRCA housing with higher power LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed. Make :Havells/Philips/Bajaj/CG. |
| 52 | S&F in repairs 20 watt photon ultra LED Tubelight (Single Side Connection) ultra bright LED polycarbonate Tubelight with <10% THD with very high efficency suited for installation in existing T8 fitting with G13 lamp holders complete all as specified and asdirected. Make : Havells/ philips/Bajaj/CG/wipro . |
| 53 | S&F in repairs 18W, LED Energy saving new generation bulk head luminaire with opal diffuser including lamp and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : Cat part no: LHEOAOP7UZ6W010 of Havells/Philips/Bajaj/HPL. |
| 54 | S&F in repairs RETRO PLL of 20 watt 4 pin with very high efficiancy suitable for installation in existing 36 W PL-L to give glare free lightcomplete all as specified and as directed. Make : Jaqur/Philips/Havells |
| 55 | S&F in repair lamp holder, PVC/Polycarbonate type insulated body with back plate in existing location suitable for batten fittings complete all as specified and as directed. |
| 56 | S&F in repair 3 mm thick, PVC hylem sheet top cover of size25cm x 20cm complete all as specified and as directed. |
| 57 | S&F in repair 3 mm thick, PVC hylem sheet top cover of size17.5cm x 10cm complete all as specified and as directed. |
| 58 | S&F in repair 3 mm thick, PVC hylem sheet top cover of size10cm x 10cm complete all as specified and as directed. |
| 59 | S&F in repair factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end bus bar, TPN, 4 way,415 Volts suitable for fixing MCBs including complete all as specified and directed. |
| 60 | S&F in repair factory made board distribution (DB)Double Door in sheet steel enclosure with common bus bar at incomming end, SPN,8 way, 240 Volts suitable for housing MCBsincluding complete all as specified and directed. |
| 61 | S&F in repair factory made board distribution (DB)Double Door in sheet steel enclosure with common bus bar at incomming end, SPN,4 way, 240 Volts suitable for housing MCBsincluding complete all as specified and directed. |
| 62 | S&F in repair MCB, four pole, 415 Volts,63 Amps, breaking capacity 10 KA complete all as specified and directed. Make : Cat No. 408702 of Legrand or equivelant. |
| 63 | S&F in repair MCB,SPN, 240 Volts,5 to 32 Amps, "C" Series, 10KA capacity complete all as specified and directed. Make : Cat No. 408609 to 408617 of Legrand or equivalent. |
| 64 | S&F in repair MCB, "C" Series, SP, 240 Volts,5 to 32 Amps, "C" Series, 10KA capacity complete all as specified and directed. Make : Cat No. 408587 to 408595 of Legrand or equivalent. |
| 65 | S&F in repair MCB, "C" Series, SP, 240 Volts,40- 63 Amps, "C" Series, 10KA capacity complete all as specified and directed. Make : Cat No. 408596 to 408598 of Legrand or equivalent. |
| 66 | S&F in repair sheet metal enclosure for MCB DB double door single pole & neutral 2 way, 240 V with common bus bar at incoming end complete all as specified and directed. |
| 67 | S&F in repair PVC casing caping of size 20-25mm complete all as specified and directed. |
| 68 | S&F in repair PVC casing caping of size 25-32mm complete all as specified and directed. |
| 69 | S&F in repair plug and socket type DB (Functinal unit) of 20 Amps capacity with provision of single pole 20 Amps MCB, plug top and earth plug, grouted flush to wall complete all as specified and directed. |
| 70 | S&F for modular type 25 Amps capacity starter type 2, for AC and gyser point withcomplete all as specified and directed. |
| 71 | M&L for earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steelbars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete inclduing taking down old one/ dismantling complete all as specified and as directed. |
| 72 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10Sqm on plan and getting out in soft/loose soil all as specified and as directed. |
| 73 | Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed. |
| 74 | Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m abovestarting point complete all as specified and as directed. |
| 75 | M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments. |
| 76 | M&L for brickslaid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and as directed. |
| 77 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 2 core, nominal cross sectional area of main conductor 6 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately. |
| 78 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 2 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately. |
| 79 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 4 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately. |
| 80 | M&L for plain cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in coping of poles, padestal, etc including necessary form work, etc complete all as specified and as directed. |
| 81 | S&F in repairs modular junction box made of SMC/FRP of size 350x250x150mm mm withprovn and incl of MCB SPN 16A, and connector terminal 4 pole indicating RYB phase colour and neutral colour with suitable hinged door preferably top operable complete fixed to street light pole/wall with suitable size of mild steel clamps, nuts and bolts as directed . (make : sintex , cat no GSMB 3525 or eqv model as approved by E-in-C) |
| 82 | S&F in repairs modular junction box made of SMC/FRP of size 240x130x110mm mm withprovn and incl of MCB SPN 16A, and connector terminal 4 pole indicating RYB phase colour and neutral colour with suitable hinged door preferably top operable complete fixed to street light pole/wall with suitable size of mild steel clamps, nuts and bolts as directed . Make : Cat no GSMB 3525 of Syntax or equivalent. |
| 83 | Taking down LED taxi/edge way lights carefully from the site, shifting to the worksite includingremoving the burnt out PCB /driver unit completely and repalcing/modificationwith new integrated high quality driver on board (DOB) MCPCB (as per sample )(white/ blue), lumens 300Lm, 3 watts LED with operating voltage 220-240 V AC (Make in india product ) chipboard of high quality aluminium plateuse to heat shrink pasteenergy efficient (averge life of 25000 hrs min)complete including testing and commissioing with necessary electrical connections and fixing back all as specifed and as directed. |
| 84 | S&F for LED drivers suitable for any make and type of LEDstreet light/ Gate light fittings of capacity 20 to 45 Watt including removing existing unserviceable driver complete all as specified and directed. |
| 85 | S&F for LED drivers suitable for any make and type of LEDstreet light fittings of capacity 60 to 100 Watt including removing existing unserviceable driver complete all as specified and directed. |
| 86 | Taking down LED/CFL/sodium vapour/metal halide/MV lamp/street light any other light fitting of any make and size including GI bracket at any height and refixing the same in position after replacement of unserviceable/defective parts likefittings , lamps , LED driver etc as required to make the fittings in smooth serviceable condition and testing complete and as directed. Note : (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of worn out cables as per existing size and type of the fitting shall be deemed to be included in the unit quoted rate of this item. (iii) Necessary climbing arrangements like scaffolding for repairing/ removing/ refixing the fittings should be included in the quoted rate. |
| 87 | S&F for new LED street light fitting of capacity 120W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : SPOR120C0809 of Century/ Crompton/Jaquar/Phillips/Havells Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor 2. Necessary excavation, PCC wk, Bracket, Connecting wire will be measured and paid separately under relavent items |
| 88 | S&F new LED street light fitting of capacity 90W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : SPOR090C0809 of Century/Crompton/Jaquar/Phillips/Havells Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor 2. Necessary excavation, PCC wk, Bracket, Connecting wire will be measured and paid separately under relavent items |
| 89 | S&F new LED street light fitting of capacity 70/75W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : CENTURYSPOR072C0807 or Equivalant in Crompton/Jaquar/Phillips/Havells Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor 2. Necessary excavation, PCC wk, Bracket, Connecting wire will be measured and paid separately under relavent items |
| 90 | S&F new LED street light fitting of capacity 60W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : CENTURYSPOR060C0805 or Equivalant in Crompton/Jaquar/Phillips/Havells Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor 2. Necessary excavation, PCC wk, Bracket, Connecting wire will be measured and paid separately under relavent items |
| 91 | Taking down LED Flood light/ hanger Light / focus light or other similar light fitting of any make and size including GI bracket at any height and refixing the same in position after replacement of unserviceable/defective parts likefittings , lamps , LED driver etc as required to make the fittings in smooth serviceable condition and testing complete and as directed. Note : (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of worn out cables as per existing size and type of the fitting shall be deemed to be included in the unit quoted rate of this item. (iii) Necessary climbing arrangements like scaffolding for repairing/ removing/ refixing the fittings should be included in the quoted rate. |
| 92 | S&F Integral compact wide beam high performanceLED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 200WLED of luminous efficiency greater than >120 Lm/watt with built in control gear with built in control gear with CCT 5700, PF >0.95 surge protection >5KV and THD <10% including connecting up with 2.5 Sqmm multistranded Aluminium/Copper conductor cables of suitable length withfixed to pole/wall, etc and testing complete all as specified and as directed. Make :- JETAVALOURFL200WLED757PINTWBLTGof Havells / Crompton/ Jaquar/ Phillips /Century. |
| 93 | S&F for integral compact wide beam high performanceLED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 100WLED of luminous efficiency greater than >120 Lm/watt with built in control gear with built in control gear with CCT 5700, PF >0.95 surge protection >5KV and THD <10% including connecting up with 2.5 Sqmm multistranded Aluminium/Copper conductor cables of suitable length withfixed to pole/wall, etc and testing complete all as specified and directed. Make: JETA IRIS FLS100WLED757APWBLTG of Havells / Crompton/ Jaquar/ Phillips/Century |
| 94 | S&F for integral compact wide beam high performanceLED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity, 60/70WLED of luminous efficiency greater than >120 Lm/watt with built in control gear with built in control gear with CCT 5700, PF >0.95 surge protection >5KV and THD <10% including connecting up with 2.5 Sqmm multistranded Aluminium/Copper conductor cables of suitable length withfixed to pole/wall, etc and testing complete all as specified and as directed. Make : JETA QUANTO PLUS FLP70WLED757SYMLENS of Havells /Crompton/ Jaquar/ Phillips/Century. |
| 95 | Taking down Aviation obstruction light any type / cap from the top of the OH water resrvoir of approx 15 to 18 m above the ground level by means of safety staging /safety belt hook-up etc, removing the electrical connections and fixing back the new LED aviation obstruction light atsame in position with necessary modifications/ PCC work and as desired by the Engr-in-Charge to make the fittings in smooth serviceable condition and testing and making good the disturbed complete and as directed. Note: (i) Replacement of Aviation obstruction light shall be measured and paid separately under relavent item as "supply only" (ii) Replacement of cable and saddling down the tank shall be measured and paid separately (iii) Necessary climbing arrangements like safety rope sys/Scaffolding/ ladders etc for repairing/removing/refixing the fittings should be included in the quoted rate. |
| 96 | Supply only aviation obstruction light, yelow painted, die-cast aluminium alloy housing, built in 75VA step up transformer, heat resistant, clear thick glass and accessories with neon lamp complete all as specified and as directed. Make : Cat No. 020075 BJAOL1 of Bajaj or equivelant. |
| 97 | S&F for time switches digital type 415 Volt Three phase of 65 Amp rating with contactor fitted inside and MCB TPN 65 A, max load of 6 KW within steel enclosure complete including connecting items complete all as specified and as directed. Make : Havells/Indo-Asian/L&T / HPL |
| 98 | S&F for time switches digital type 240v/ single phase of 32 Amp rating with contactor fitted inside and MCB SPN 40 A, max load of 12 KW within steel enclosure complete including connecting items complete all as specified and as directed. Make : Havells/Indo-Asian/ L&T /HPL |
| 99 | S&F for street light bracket arm of length not less than 1.5 m made out of GI tubing, 40mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed. |
| 100 | S&F in repairs 50 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, poleusing suitable clamp/holder bat complete all as specified and as directed. |
| 101 | S&F in repairs LED post top lantern of 20 Wattmade in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection,including 20 Watt MH/SV lamp including providing and connection with 1.5Sqmm copper conductor, multistranded copper conductor cable of required length complete all as specified andas directed. Make : Model : APBY020C0875 of Century/Havells/ Philips/CG/Cromption. |
| 102 | S&F in repairs decorative gate light 20W made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 Base, including providing and connection with 2.5 Sqmm aluminium conductor, cable of required length and taking down old unserviceable fitting of any make and size complete all as specified and as directed. Make : Havells /Philips/Bajaj/Crompton/Century |
| 103 | S&F in repair, LED bollard with in built B22 holder made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection, AC 120-300 Volts, 50 Hz including providing and connection with 3 runs of1.5 Sqmm copper conductor, multi-stranded copper conductor cable of required length complete all as specified and as directed. Note : LED Bulb shall be measured and paid separately. Make : Havell"s/Century/CG. |
| 104 | S&F for porcelain holder/Batten holder ( with screws in existing post top lantern fitting/CFL Street light fitting by removing top postin place of Pin type holder to suite B22 base LED bulb to complete all as specified and as directed. Make : Bajaj/Havell"s. |
| 105 | S&F in repairs, lamp holder assembly as per existing garden light fittingwith necessary modifying the electrical connections complete all as specified and as directed. |
| 106 | Supply only LED lamp14 Watt B22 base complete all as specified and as directed. |
| 107 | Supply only LED lamp10 Watt B22 base complete all as specified and as directed. |
| 108 | Supply only LED lamp20 Watt B22 base complete all as specified and as directed. |
| 109 | Taking down the service connections of the lighti fittings from connector/ ceiling roses/ overhead bare conductor etc of the steet/ security lights , fromheight of approx 7mtr from groundby any means on PCC/Metal poles with all safety measures to remove the carbon deposits/ disconnected due to wind/wear and tear complete and connecting /fixing back the connections/fittings complete all as specified and as directed |
| 110 | S&F in repairs, 25 mm dia, rigid non metalic, PVC Conduits "medium grade" complete with all accessories suitable for UG cable complete all as specified and as directed. |
| 111 | S&F for 1100 volts grade, heavy duty cable PVC insulated aluminium conductor , multi stranded served with inner sheathing of PVC tape and overall PVC Sheather in service connections 2 core, stranded conductor of 6 sqmm complete all as specified and as directed |
| 112 | S&F for 1100 volts grade, heavy duty cable PVC insulated aluminium conductor , multi stranded served with inner sheathing of PVC tape and overall PVC Sheather in service connections 2 core, stranded conductor of 10 sqmm complete all as specified and as directed |
| 113 | S&F for three core of single run copper cable PVC insulated, pvc sheathed flexible stranded copper cable FRLSH suitable for outdoor use 1.5 sqmm PVC single core PVC Sheathed in the exisitng steel tubular pole complete all as specified and directed. |
| 114 | Supply only PVC insulation tape of pack of 30 rolls multi colour and black of standardsize and thickness 2 to 3mm complete all as specified and as directed Make : Anchor/ Steelgrip/ Rhino. |
| 115 | M&L for drawing a circle and writing the number in side the circle on Electric Pole approximatley 10 letters. The nomenclature and colour of the sticker to be stickered on pole shall be given by the site-in-chatge/JE E&M |
| 116 | M&L for scrapping the existing surfaces of the street light poles of height 7.5 metres (painting length) with emery paper, removing the dust and rustproperly and applying 2 coats of aluminum paint over complete pole and stickering the pole with Glow sign round the electrical pole at three places of 10cm width andnumbering with paint approximately not less than 4 Letters with glow sign material at the bottom of pole. The nomenclature shall be given by the site -in-charge/JE(E&M) complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
