Military Engineer Services-MES has published Certain Repair Works To Steel And Wooden Furniture Including Painting And Polishing For Md Accn Of Jcos / Or, Offrs And Otm Under Ge ( West ) Jalandhar Cantt Certain Repair Works To Steel And Wooden Furniture Including Painting And Polishing For Md Acc. Submission Date for this Tender is 03-03-2022. Painting Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-03-2022 |
| Sl. No. | Item Description |
| 1 | TABLE 900MM X 900MM X 760MM (Drg. No FD-88 ) Supply and fixing table top of size 900mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete duly polished including taking down the old unsv top of table 900x 900x760 mm complete all as specified and directed by the Engr-in-Charge. |
| 2 | TABLE 900MM X 600MM X 760MM WITH /WITHOUT DRAWER ( Drg. No FD-1008) Supply and fixing long rail,short rails,legs,stiffeners made of Square conduit pipe 25 mm size having 1.6mm wall thickness including taking out the old unsv parts including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black/olive green complete all as specified and directed by the Engr-in-Charge. |
| 3 | Supply and fixing table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round completeincluding taking down the old unsv top of table 900x 600x760 mm complete all as specified and directed by the Engr-in-Charge. |
| 4 | Material and labour for replacement of Drawers made of PBI sheet 1.00mm thick of table including cutting, welding turning, drilling, bending as required shape complete all as specified and directed |
| 5 | TABLE DINNING OR (Drg. No FD- 165) Supply and fixing for 18mm thick pre-laminated particular board exterior grade melamine faced top including teak wood beading 4mmx 18mm all around duly polished including taking down the old unsv top of table dinning complete all as specified and directed by the Engr-in-Charge. |
| 6 | Supply and fixing long rail, short rails, legs, stiffeners made of Square conduit pipe 25mm size having 1.6mm wall thickness including taking out the old unsv parts including one coat of red oxide primer and painting the steel frames with one or more coat of synthetic enamel paint black/olive green complete all as specified and directed by the Engr-in-Charge. |
| 7 | CHAIR STEEL TUBULAR WITH ARMS [Drg. No FD-75(M)] Supply and fixing for Seat made of first class hard wood sheesham well seasoned duly painted with sythetic enamel paint (black), canned in Godrej pattern with plastic cane inclduing opening of and removal of old unsv seat of chair and to be fixed with tubular frame with and including appropriate size of bolts, nuts and washers complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply and fixing Back made of first class hard wood sheesham well seasoned duly painted with sythetic enamel paint (black), canned in Godrej pattern with plastic cane inclduing opening of and removal of old unsv back of chair and to be fixed with tubular frame with and including appropriate size of bolts, nuts and washers complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply and fixing Arms rest made of first class hard wood sheesham well seaoned duly painted with sythetic enamel paint (black)including opening of and removal of old unsv arms rest of chair and to be fixed with tubular frame with and including appropriate size of bolts, nuts and washers complete all as specified and directed by Engr-in-Charge. |
| 10 | Material & Labour for preparation of old painted steel surfaces of steel frame of Chair steel tubular with arms any description not other wise described including removal of rusts/cracks and derusting minor rust and applying one coat (finishing coat) of synthetic enamel paint (Olive green/black) complete all as specified and as directed by Engr-in-Charge. |
| 11 | Material & Labour for PVC shoe of approved quality to the leg of Steel chair including Opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge. |
| 12 | Supply and fixing for Flat Iron 20mmx3mm and 500mm long fixed to support the seat of chair steel including necessary welding with steel frame including taking out the old unsv Flat iron complete all as specified and directed by Engr-in-Charge. |
| 13 | CHAIR STEEL TUBULAR WITHOUT ARMS [Drg. No FD-75(M)] Supply and fixing for Seat made of first class hard wood sheesham well seasoned duly painted with sythetic enamel paint (black), canned in Godrej pattern with plastic cane inclduing opening of and removal of old unsv seat of chair and to be fixed with tubular frame with and including appropriate size of bolts, nuts and washers complete all as specified and directed by Engr-in-Charge. |
| 14 | Supply and fixing Back made of first class hard wood sheesham well seaoned duly painted with sythetic enamel paint (black), canned in Godrej pattern with plastic cane inclduing opening of and removal of old unsv back of chair and to be fixed with tubular frame with and including appropriate size of bolts, nuts and washers complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply and fixing for Flat Iron 20mmx3mm and 500mm long fixed to support the seat of chair steel including necessry welding with steel frametaking out the old unsv Flat iron complete all as specified and directed by Engr-in-Charge. |
| 16 | Material & Labour for preparation of old painted steel surfaces of steel frame of Chair steel tubular with out arms any description not other wise described including removal of rusts/cracks and derusting minor rust and applying one coat (finishing coat) of synthetic enamel paint (Olive green) complete all as specified and as directed by Engr-in-Charge. |
| 17 | Material & Labour for PVC shoe of approved quality to the leg of Steel chair including Opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge |
| 18 | LOCKER STEEL BED SIDE(Drg. No FD-6210, FD-49 & FD-1028) Material & Labour for replacement of leg made out of PBI sheet 1.00mm thick of locker bed side steel including cutting, welding turning, drilling, bending as requited shape complete all as specified and directed. |
| 19 | All as per serial item No. 6.00 here in before but Shutter (one side) made out of PBI sheet 1.00mm thick complete all as specified. |
| 20 | All as per serial item No. 6.00 here in before but back side made out of PBI sheet 1.00mm thick complete all as specified. |
| 21 | All as per serial item No. 6.00 here in before but bottom made out of PBI sheet 1.00mm thick complete all as specified. |
| 22 | All as per serial item No. 6.00 here in before but top made out of PBI sheet 1.00mm thick complete all as specified. |
| 23 | Supply and fixing aluminum anodized hasp and staple 100mm, safety type complete all as specified. |
| 24 | Supply and fixing mild steel pressed handle oval type handle size 100mm complete all as specified. |
| 25 | Supply and fixing mild steel butt hinge 75mm long complete complete all as specified. |
| 26 | Material and labour for hanging rod of aluminum pipe 20mm dia, medium weight as per existing length including repair to brackets as required complete all as specified. |
| 27 | ALMIRAH LARGE STEEL (Drg. No FD-67 & 1031) Material and labour for replacement of leg made out of PBI sheet 1.00mm thick of almirah including cutting, welding turning, drilling, bending as requited shape complete all as specified and directed. |
| 28 | All as per serial item No. 7.00 here in before but Shutter made out of PBI sheet 1.00mm thick including hinges-2 Nos complete all as specified and directed. |
| 29 | All as per serial item No. 7.00 here in before but Shelves made of PBI sheet 1.00mm thick including brackets complete all as specified and directed. |
| 30 | Supply and fixing in repairs Mild steel lock, size 65mm with key in duplicate complete all as specified. Make: Harrison /Eleri/Anand. |
| 31 | Supply and fixing in repairs Mild steel chromium plated handle 100mm long complete all as specified. |
| 32 | Supply and fixing in repairs Mild steel brackets with screws to support shelves complete all as specified. |
| 33 | ALMIRAH MEDIUM STEEL (Drg. No FD-67M & 1032) Material and labour for replacement of leg made out of PBI sheet 1.00mm thick of almirah including cutting, welding turning, drilling, bending as requited shape complete all as specified and directed |
| 34 | All as per serial item No. 8.00 here in before but Shutter made out of PBI sheet 1.00mm thick including hinges- 2 Nos complete all as specified. |
| 35 | All as per serial item No. 8.00 here in before but Shelves made of PBI sheet 1.00mm thick including brackets complete all as specified. |
| 36 | Supply and fixing in repairs Mild steel lock, size 65mm with key in duplicate complete all as specified. Make: Harrison /Eleri/Anand. |
| 37 | Supply and fixing in repairs Mild steel chromium plated handle 100mm long complete all as specified. |
| 38 | Supply and fixing in repairs Mild steel brackets with screws to support shelves complete all as specified. |
| 39 | TABLE OFFICE CLERK STEEL (Drg. No FD-84 & 1004) Material & Labour for replacement of Top of table, made of 18mm thick pre-laminated particle board (exterior grade) melamine faced ISI marked including 1st class hard wood beading 18mm x 4mm all roundcomplete all as specified and directed. |
| 40 | Material & Labour for replacement of Drawers made of PBI Sheet 1.00mm thick of table including cutting, welding turning, drilling, bending as required shape complete all as specified and directed. |
| 41 | Supply and fixing in repairs Lock 6 lever of brass with two keys complete all as specified. Make : Harrison/Eleri/Anand |
| 42 | Material & Labour for preparation old wooden surfaces of beading and finishing with French polish complete all as specified and directed |
| 43 | TEAPOY VERANDAH (Drg. No FD-35 & 255) Material & Labour for replacement of top of teapoy, size 900mm x450mm made of 18mm thick pre-laminated particle board (exterior grade) melamine faced ISI markedincluding18mm x 4mm teak wood beading all round complete all as specified and directed. |
| 44 | BOOK CASE STEEL LARGE [Drg. No FD-69(M)] Taking out broken /unserviceable leg of book case steel large and providingnew leg of 1 mm thick PBI sheet by welding duly painted complete all as specified and directed. |
| 45 | Supply and fixing new lockwith duplicate keys of Godrej pattern lock suitable for Book Case Steel complete all as specified and directed. |
| 46 | Supply and fixing new handle ‘medium weight’ made of chromium plated steel suitable for book case steel large including taking out old defective unserviceable handle complete all as specified. |
| 47 | Taking out broken glasses and fixing new glasses of 5mm thichness at the shelf door of Book case complete all as specified by Engr-in-Charge. |
| 48 | Cleaning of steel surface inner and outer, making good old surface by removing proper denting and applying two coat synthetic enamel paint (Olive Green) over a coat ofred oxide primer on complete surface of book case steel Large complete all as specified by Engr-in-Charge.. |
| 49 | TABLE OFFICE OFFICER STEEL (Drg. No FD-84 & 1003) Material & Labour for replacement of Top of table, made of 18mm thick pre-laminated particle board (exterior grade) melamine faced ISI marked including 1st class hard wood beading 18mm x 4mm all roundcomplete all as specified and directed. |
| 50 | Material & Labour for replacement of Drawers made of PBI Sheet 1.00mm thick of table including cutting, welding turning, drilling, bending as requited shape complete all as specified and directed. |
| 51 | Supply and fixing in repairs Lock 6 lever of brass with two keys complete all as specified. Make : Harrison/Eleri/Anand |
| 52 | Material & Labour for preparation old wooden surfaces of beading and finishing with French polish complete all as specified and directed. |
| 53 | CHAIR COMPUTER (Drg No FD/E6/MAP/01 & TP) Supply and fixing in replacement PVC arm of Chair Writing MAP with new PVCarm 2 Nos all as per existing size, shape and pattern as shown on drg. complete all as specified and directed. |
| 54 | Supply and fixing in replacement of old unservicable cushion and tapestry cloth with new cushion 40 denisity and tapestry cloth best quality, with PVC lapping all around including new hot pressed plywood 12mm complete all as specified and directed. Make: Kurlon or equivalent. |
| 55 | All as per Srl Item No 13.01 here-in-before but for back of chair complete all as specified. |
| 56 | Supply and fixing in replacement of nylon castor wheels complete all as specified. |
| 57 | Supply and fixing in replacement Gas lift pneumatic system cylinder and accessories complete all as specified. |
| 58 | TABLE COMPUTER (Drg No FD/E6/MAP-03 & TP) Supply and fixing in replacement table top made of 18mm thick prelaminated particle board with PVC lipping aroundcomplete all as specified and shown on drg. |
| 59 | All as per Srl Item No 14.00 here-in-before but for key board tray, pull out tray fixed with telescopic channels-02 Nos complete all as specified. |
| 60 | All as per Srl Item No 14.00 here-in-before but fordrawer, fixed with telescopic channels-02 Nos and knob-01 No complete all as specified. |
| 61 | All as per Srl Item No 14.00 here-in-before but forshelf (horizontal or vertical or bottom), fixed with screws complete all as specified. |
| 62 | BED HARD STEEL (Drg. No FD/E6/MAP/08) Taking out existing broken plywood from the bed hard by loosening the nut bolts with washers and Supply and fixing new 12 mm thick BWR grade plywood fixed to bed hardframe with new GI Nut, bolts complete all as specified. |
| 63 | Taking out existing broken head board form bed hard steel and Supply and fixing new head board with 18 mm thick exterior grade pre laminated MDFboard both side laminated in light walnut shade or shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws complete all as specified. |
| 64 | Taking out existing broken foot board form bed hard and Supply and fixing foot board with 18 mm thick exterior grade pre laminated MDFboard both side laminated in light walnut shade or shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws complete all as specified. |
| 65 | Spray painting all steel surface with existing shade and colour or as approved by GE after application of sand paper and grinder to make the surface smooth and even over red-oxide primer complete all as specified and directed. |
| 66 | Material & Labourfor rubber shoe of approved quality to bed hard steel including Opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge. |
| 67 | TABLE BEDSIDE STEEL [ Drg. No FD/E6/MAP/15 ( R) ] Supply & fixing of newtop of 18 mm thick exterior grade prelaminated MDF board of existing shade/both side laminated with light walnut shade or as approved by GE covered with 4 mm teak wood beading in matching shade, Supply & fixing new handle for cupboard. All steel surface shall be painted with two coats of synthetic enamel paint of existing shade after preparation of surface complete all as specified. |
| 68 | Material and labour for fancy aluminum handle/NOB for drawers of approved quality to table bedside steel including opening of and removal of old UNSV part complete all as specified and directed by Engr-in-Charge |
| 69 | Material & Labour for telescopic channel of approved quality to table bedside steel including opening of and removal of old unsv telescopic channel complete all as specified and directed by Engr-in-Charge |
| 70 | Material & Labour for rubber shoe of approved quality to table bedside steel including opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply and fixing (including removal of old unsv part) drawer with telescopic channel made of 18mm thick exterior grade PPB of exisiting shade/both side laminated with light walnut shade or as approed by GE covered with 4mm teak wood beading in matching shade complete all as specified. |
| 72 | Supply and fixing (including removal of old unsv part) back made of 6mm plywood BWR or as approved by GEcomplete all as specified. |
| 73 | FORM WITHOUT BACK (Drg. No FD-77) Material & Labour for 25mm thick Seat plank of first class hard wood (Sheesham) well seasoned duly French polished and fixed with nuts and bolts including a coatof synthetic enamel paint to existing steel frame complete all as specified. |
| 74 | Material & Labour for replacement of MS square conduit pipe 25mm size, 1.6mm wall thickness as in long rails, short rails, legs, stiffnerspainted with two coats of synthetic enamel panit over a coat of red oxide primer complete all as specified and directed. |
| 75 | Material & Labour for rubber shoe of approved quality to foam without back including opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge. |
| 76 | STOOL DRESSING LADIES (Drg No.FD-380/FD-1114) Material & Labour in replacement ofold unserviceable cushion with new cushion 40mm denisty size 380x450 mm 75mm thick duly covered of tapestry cloth best quality three sides stiched and one side provided with zip complete all as specified and directed. Make-Kurlon or equivalent. |
| 77 | Material and labour for preparation of old painted steel surfaces of Locker Steel Bed Side, cleaning including removingdents if any, priming dents portion and applying one coat of synthetic enamel paint of Olive Green colour by spray painting (with spray Gun) complete all as specified and directed by Engr-in- Charge. |
| 78 | All as per serial item No. 19.00 here-in-before but only external surfaces of Almirah large steel(All external surfaces when Almirah is in locked position) complete all as specified and directed. |
| 79 | All as per serial item No. 19.00 here-in-beforere but only external surfaces of Almirah medium steel with shelves (All external surfaces when Almirah is in locked position) complete all as specified and directed. |
| 80 | All as per serial item No. 19.00 here-in-before but Table office clerk steel complete all as specified and directed. |
| 81 | All as per serial item No. 19.00 here-in-before but Table office Officer steel complete all as specified and directed. |
| 82 | All as per serial item No. 19.00 here-in-before but Trustle store room steel complete all as specified and directed. |
| 83 | All as per serial item No. 19.00 here-in-before but Ledder for loft complete all as specified and directed. |
| 84 | All as per serial item No. 19.00 herein before but Table dining OR"s complete all as specified and directed. |
| 85 | All as per serial item No. 19.00 here-in-before but Table 3" x 2" with/with out drawers complete all as specified and directed. |
| 86 | All as per serial item No. 19.00 here-in-before but Table 3" x 3" complete all as specified and directed. |
| 87 | All as per serial item No. 19.00 here-in-before but Box kit steel complete all as specified and directed. |
| 88 | All as per serial item No. 19.00 here-in-beforee but Rack steel of various sizes complete all as specified and directed. |
| 89 | All as per serial item No. 19.00 here-in-before butBook case steel complete all as specified and directed. |
| 90 | All as per serial item No. 19.00 here-in-before but Stool steel complete all as specified and directed. |
| 91 | All as per serial item No. 19.00 here-in-before but Rack pegion hole complete all as specified and directed. |
| 92 | All as per serial item No. 19.00 here-in-before but Rack 6 tire adjustable complete all as specified and directed. |
| 93 | All as per serial item No. 19.00 here-in-before but Shoe rack complete all as specified and directed. |
| 94 | All as per serial item No. 19.00 here-in-before but Teapoy Verandha complete all as specified and directed. |
| 95 | All as per serial item No. 19.00 here-in-before but Bench workshop complete all as specified and directed. |
| 96 | Material and labour for welding to various type of steel furniture inside as per drawing complete all as specified and directed by Engr-in-Charge. |
| 97 | CHAIR DINNING : (Drg No :FD-16 FD-203 FD-226 FD-279 DB 3952 etc ) Material & labour for following wooden partsmade of 1st class Hard wood (Sheesham) duly smooth size and shape as shown on drg including removing/ taking off old unsv parts complete all as specified and as directed by Engr-in-Charge. (a) Front leg |
| 98 | (b) Rear Leg |
| 99 | (c) Seat frame bottom |
| 100 | (d) Front stiffener |
| 101 | (e) Rear stiffener |
| 102 | (f) Side Stiffner |
| 103 | (g) PVC Shoe |
| 104 | CHAIR WRITING / CHAIR CBA ETC : (Drg No. FD-250 WDF-28, FD 202, FD280 etc) Material & labour for following wooden partsmade of 1st class Hard wood (Sheesham) duly smooth size and shape as shown on drg including removing/ taking off old unsv parts complete all as specified and as directed by Engr-in-Charge. (a) Front Leg |
| 105 | (b) Rear Leg |
| 106 | (c) Bottom Frame |
| 107 | (d) Leg Stiffener |
| 108 | (e) Back stiffener |
| 109 | (f) Hand Rest |
| 110 | (g) PVC Shoe |
| 111 | CHAIR EASY : (Drg No. FD-17 FD-201 FD-28 FD 229 etc) Material & labour for following wooden partsmade of 1st class Hard wood (Sheesham) duly smooth size and shape as shown on drg including removing/ taking off old unsv parts complete all asspecified and as directed by Engr-in-Charge. (a) Front Leg |
| 112 | (b) Rear Leg |
| 113 | (c) Hand Rest |
| 114 | (d) Seat frame bottom |
| 115 | (e) Back stiffener |
| 116 | (f) Leg stiffener |
| 117 | (g) PVC Shoe |
| 118 | HAT STAND WITH MIRROR : (Drg No. FD-23,FD-206, FD-233, FD-361,FD-362, FD-1110) Material & labour for front and back made out of 6mm thick commercial plywod (BWR) ISI marked with all around beading of sheesham wood as per drawing complete all as specified and as directed by Engr-in-Charge. |
| 119 | Material & labour for looking mirror size as per drawing mirror of5 mm thick complete all as specified and as directed by the Engr-in-Charge. |
| 120 | Material & labour for of key plate as per drawing complete all as specified and as directed by Engr-in-Charge. |
| 121 | Material & labour for Peg complete all as specified and as directed by Engr-in-Charge. |
| 122 | TABLE DRESSING GENTS : (Drg No. FD-31, FD 230 etc) Material and labour for providing following parts of Table Dressing Gents including removing of old unsv parts complete all as specified and as directed byEngr-in-Charge including french polishing with one or more coats :- (a) 12mm thick Prelaminated particle board exterior grade melamine faced ISI marked as top of dressing table complete all as specified and directed. |
| 123 | (b) Looking mirror 760mm x 380mm sizebeveled edge mirror of5 mm thick selected quality glass mounted on 5mm thickcommercial plywood with & includingall round frame of Sheesham wood complete all as specified and as directed by the Engr-in-Charge. |
| 124 | (c) 12mm thick Ply wood ISI Marked commercial for side of dressing table complete. |
| 125 | (d) Key holes 25mm x 40mm with screw complete. |
| 126 | (e) Drawers complete. |
| 127 | (f) 6mm thick back ply wood ISI Marked commercial of dressing table complete. |
| 128 | (g) Knob aluminium as per Trade pattern complete. |
| 129 | TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS: (Drg No.FD-42,55 & 231) Material & labour for providing following parts of table 900mm x 600mmm x 760mm including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge :- (a) Leg of Sheesham wood complete |
| 130 | (b) Corner of sheesham wood complete |
| 131 | (c) Front or Rear rail of sheesham wood complete |
| 132 | (d) Side rail of sheesham wood complete |
| 133 | (e) Stiffener of Sheesham wood complete. |
| 134 | (f) PVC Shoe |
| 135 | (g) Table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified. |
| 136 | SOFA SET FIVE SEATER / FOUR SEATER : (Drg No. FD-373/ 1113/ 281) Material & labour forteak wood made long rail to the long piece of sofa set after removing old damaged long rail complete all as specified and directed by Engr-in-charge. |
| 137 | Material & labour for short rails in sofa set 5 seats and 4 seats after removing old damaged short rails / stiffeners duly made out of seasoned teak wood complete all as specified and directed by Engr-in-charge. |
| 138 | Material & labour for back support of sofa set 5 seater made out of seasoned teak wood after removing old damaged back support complete all as specified and directed by Engr-in-charge. |
| 139 | Material & labour for hand rest made out of seasoned teak wood after removing old damaged handles, complete all as specified and directed by Engr-in-charge. |
| 140 | Material & labour for back legs of sofa set 4 / seats made out of teak wood well seasoned after removing old damage legs complete all as specified and directed by Engr-in-charge. |
| 141 | Material & labour for front legs of sofa set 4 / seats made out of teak wood well seasoned after removing old damage legs complete all as specified and directed by Engr-in-charge. |
| 142 | TABLE 900MM X 600MM X 760MM WITH DRAWERS: (Drg No.FD-41,224 & 283) Material & labour for providing following parts of table 900mm x 600mmm x 760mm including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge :- (a) Leg of Sheesham wood complete |
| 143 | (b) Front or Rear rail of sheesham wood complete |
| 144 | (c) Side rail of sheesham wood complete |
| 145 | (d) Stiffener of Sheesham wood complete. |
| 146 | (e) Material & labour for drawer |
| 147 | (f) Table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified. |
| 148 | (g) Knob 38mm Trade pattern complete. |
| 149 | (h) corner of sheesham wood complete |
| 150 | SIDE BOARD : (Drg No. FD-241 FD-26(M) etc) Material & labour for providing following parts of side board and removing of old unsv parts including french polishing with one or more coats complete all as specified and as directed by Engr-in-Charge. (a) Top of side board made out of 18mm thick PPB (exterior grade) melamine faced ISI marked complete all as specified. |
| 151 | (b) Back made out of 6mm thick commercial plywood (BWR) ISI marked complete all as specifed. |
| 152 | (c) Drawer made out of 18mm thick PPB bottom fixed with plywood 6mm thick ISI marked complete all as specified and directed. |
| 153 | (d) Side made out of 18mm thick PPB (exterior grade) melamine faced ISI marked complete all as specified. |
| 154 | (e)Leg of sheesham wood |
| 155 | (f) Door of made out of 18mm thick PPB (exterior grade) melamine faced ISI marked complete all as specified. |
| 156 | TRUSTLE STORE ROOM WOODEN : (Drg No. FD-86) Material & labour for replacement of following parts oftrustle store room woodenof size as shown on drawing including removing/taking ofthe old UNSV respective parts completes all as specified and as directed by the Engr-in-charge. (a) Long rail made out of Ist class hard wood sheesham. |
| 157 | (b) Short rail made out of Ist class hard wood sheesham. |
| 158 | (c) Centre rail made out of Ist class hard wood sheesham. |
| 159 | (d) Leg rail made out of Ist class hard wood sheesham. |
| 160 | (e) PGI Sheet 22 Guage to the trustle store wooden. |
| 161 | (f) Preservative of trustle store room wooden with creaosote oil and used Engine oil of mixed Ration 50 : 50 . |
| 162 | TABLE DINNING FOR SIX PERSONS : (Drg No. FD-273, FD-239, FD-1115) Material & labour for providing following parts of table dinning for six persons including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge. (a) Table top of size 1500mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified. |
| 163 | (b) Leg of Sheesham wood complete |
| 164 | (c) Front or Rear rail of sheesham wood complete |
| 165 | (d)corner of sheesham wood complete |
| 166 | (e) Side rail of sheesham wood complete. |
| 167 | (f) PVC Shoe |
| 168 | TABLE DINNING FOR EIGHT PERSONS : (Drg No. FD-30 FD-273 FD-239 FD-1115) Material & labour for providing following parts of table dinning for eight persons including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge. (a) Table top of size 1800mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified. |
| 169 | (b) Leg of Sheesham wood complete |
| 170 | (c) Front or Rear rail of sheesham wood complete |
| 171 | (d)corner of sheesham wood complete |
| 172 | (e) Side rail of sheesham wood complete. |
| 173 | (f) PVC Shoe |
| 174 | TEAPOY : (Drg No. FD-34 FD-278 FD-232) Material & labour for providing following parts of Teapoy including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge. (a) Front or Rear leg of Sheesham wood complete. |
| 175 | (b) Front or Rear rail of sheesham wood complete. |
| 176 | (c) Side rail of sheesham wood complete |
| 177 | (d) Top of size 600mm x450mm made out of 18mm thick PPB exterior grade melamine faced, ISI marked complete all as specified and directed. |
| 178 | (e) PVC Hard Rubber Shoe. |
| 179 | TABLE PEG : (Drg No. FD-25, FD-277,FD-236) Material & labour for providing following parts of Table Peg including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge. (a) Leg of Sheesham wood complete |
| 180 | (b) Side rail of sheesham wood complete |
| 181 | (c) Top of size 450mm x 300mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete all as specified. |
| 182 | (d) Front or Rear rail of Sheesham wood complete. |
| 183 | (e) PVC Hard Rubber Shoe. |
| 184 | TABLE CENTRE : (Drg No. FD-29, FD-235, FD-274) Material & labour for providing following parts of Table Centre including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge. (a) Front or Rear leg of Sheesham wood complete. |
| 185 | (b) Front or rearrail of sheesham wood complete. |
| 186 | (b) side rail of sheesham wood complete. |
| 187 | (c)Stiffner of sheesham wood complete. |
| 188 | (d) PVC Hard Rubber Shoe |
| 189 | (e) Table Top of size 900mm x450mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete all as specified. |
| 190 | TABLE 900MM X 900MM X 760MM : (Drg No.FD-88) Material & labour for providing following parts of table 900mm x 900mmm x 760mm including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge :- (a) Leg of Sheesham wood complete |
| 191 | (b)Front or rear rail of sheesham wood complete |
| 192 | (c) Table top of size 900mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified. |
| 193 | (d)Side rail of sheesham wood complete |
| 194 | (e)PVC Hard Rubber Shoe |
| 195 | TABLE BED SIDE (FD-276) M & L replacement of existing unserviceable Top of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round table top complete all as directed by Engineer in charge. |
| 196 | M & L replacement of unserviceable back of Table bed side of 06 mm thick and commercial ply wood size 450x410 mm, complete all as directed by Engineer in charge. |
| 197 | M & L for replacement of shelve of Table bed side made out of 12 mm thick BWR plywood with teak veneered surface on top & commercial on other side including04 mm thick teak wood beading all round to exposed surface of shelves complete all as directed by Engineer in charge. |
| 198 | M & L for replacement of unserviceable side of Table bed side of size 510x230 mm made out of pre laminated particle board exterior grade with and including 04 mm thick teak wood beading to all exposed surface all round the sides complete all as directed by Engineer-in-charge. |
| 199 | BED HARD : (Drg No. FD-245, FD-246) Material & labour for long rail of size 65mmx50mmx1980mm long or 90mm x 35mm x 1980mm made out of Sheesham wood including removing of old unsv long rail complete all as specified and as directed by Engr-in-Charge. |
| 200 | Removing of old unserviceable long rail of hard bed and assembling bed hard with short rail size 65mm x50mm x 900mm by cutting of long rail and providing tenon on both ends of short rail and making joints tight proof) Long rails retrieved from above serial item here-in-before, will be issued free for assembling complete all as pershown on drawing and as directed by Engr-in-Charge. |
| 201 | Material & labour for head board of deodar wood except leg and shall be of well seasend sheesham wood of firstquality head board shall be covered with 3mm thick ply wood teak facing on one side and commercial on the other side size & shape as shown on drawing including removing of old unsv head board complete all as specified and as directed by Engr-in-Charge. |
| 202 | Material & labour for foot board made of 1st class deodar (Soft) wood, except leg and shall be of well seasend sheesham wood of firstquality Foot board shall be covered with 3mm thick ply wood teak facing on one side and commercial on the other side, size & shape as shown on drawing including removing of old unsv foot board complete all as specified and as directed by Engr-in-Charge. |
| 203 | Material & labour forPlywood commercial 12 mm thickfixed on long rail / side rail along withdamaged supports of Sheesham wood, size & shape shown on drawing including removing of old unsv top complete all as specified and as directed by Engr-in-Charge. |
| 204 | Supply & fixingof new cushions of 32 d foam of size 22" x 21" x 100mm duly stiched in tapestery cloth (cloth shall not less than 150/- per meter ) makeof foam cushion shall be Kurlon/Sleepwell rest all asspecified and directed by Engr-in-Charge. |
| 205 | STOOL DRESSING WITH CUSHION : (Drg No FD-374) Material & labour for providing following parts of stool dressing with cushion including french polishing with one or more coats and also dismantling & removing of old unsv parts from the frame complete all as specified and as directed by Engr-in-Charge. (a) Back of the pre laminated MDF board as per drawing complete. |
| 206 | (b) Side of the pre- laminated MDF board as per drawing complete. |
| 207 | (c)Shelve of the pre- laminated MDF board as per drawing complete. |
| 208 | (d) PVC Hard Rubber Shoe |
| 209 | TABLE DRESSING LADIES (FD-251) M & L for replacement of unserviceable stiffener long of size 40x 25x 650 mm of Table dressing ladies with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge. |
| 210 | M & L for replacement of unserviceable leg of Table dressing ladies with new one well seasoned 1st class teak wood of size 40x40 mm at top & 25x25 mm at bottom & height of leg shall be 150 mm, complete all as directed by Engineer in charge. |
| 211 | M & L for replacement of unserviceable stiffener short of size 40x25x230 mm of Table dressing ladies with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge. |
| 212 | M & L for replacement of broken/damaged mirror of Table dressing ladies with new one mirror of 05 mm thick of size 366x1220 mm of approved quality fixed to wooden frame, complete all as directed by Engineer in charge. |
| 213 | M & L for replacement of back side of mirror of Table dressing ladies made out of 06 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer, providing one 25 mm dia PVC knob of best quality, complete all as directed by Engineer in charge. |
| 214 | M & L replacement of existing unserviceable Top of Table dressing ladies with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, complete all as directed by Engineer in charge. |
| 215 | M & L for replacement of drawer of Table dressing ladies made out of 12 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer, providing one 25 mm dia PVC knob of best quality complete all as directed by Engr-in-Chage. |
| 216 | M & L for replacement of glass pane of Table dressing ladies 05 mm thick fitted with two nos. sliding & fixed in aluminum channel of 25 mm complete all as shown in drg & as directed by Engineer-in-charge. |
| 217 | M & L for replacement of back of the box of Table dressing ladies with 12 mm thick BWR plywood commercial grade of size 366x900x12 mm, complete all as shown in drg & as directed by Engineer-in-charge. |
| 218 | M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE DRESSING LADIES with GI screw, complete all as directed by Engineer in charge. |
| 219 | Book case (FD-237) M & L replacement of top of Book case of size 1200x300 x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round complete all as directed by Engineer in charge. |
| 220 | M & L replacement of bottom of Book case of size 1200x300x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round complete all as directed by Engineer in charge. |
| 221 | M & L replacement of side of Book case of size 660x300x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round complete all as directed by Engineer in charge. |
| 222 | M & L replacement of shutter of Book case of size 380x625x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all roundedges of shutter, complete all as directed by Engineer in charge. |
| 223 | M & L replacement of back of Book case of size 1200x660 mm with providing 6 mm thick BWP interior grade ply wood teak veneers, complete all as directed by Engineer in charge. |
| 224 | M & L replacement of stiffener long of Book case of size 25x40x900 mm with new one well seasoned 1st class teak wood complete all as directed by Engineer in charge. |
| 225 | M & L replacement of leg of Book case of size 45x45 mm at top & 25x25 at bottom side with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge. |
| 226 | M & L for replacement for shelf of Book case of size 260x760x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading in frontcomplete all as directed by Engineer in charge. |
| 227 | TABLE WRITING WITH DRAWER (FD-275) M & L for replacement of existing broken/damaged leg of Table writing W/drawer with new one well seasoned 1st class teak wood of size 55x35x717 mm shape & size as per existing complete all as directed by Engineer in charge. |
| 228 | M & L for replacement of existing broken/damaged stiffener of Table writing W/drawer with new one well seasoned 1st class teak wood of size 25x50x1145 mm shape & size as per existing, complete all as directed by Engineer in charge. |
| 229 | M & L for replacement of unserviceable top rail of Table writing W/drawer with new one well seasoned 1st class teak wood of size 25x50x1125 mm, complete all as directed by Engineer in charge. |
| 230 | M & L for replacement of unserviceable side of Table writing W/drawer with new18 mm thick pre laminated particle board with exterior grade with decorative choice lamination in one side & bolaning white with 4mm thick teak wood beading all round exposed edge, complete all as directed by Engineer in charge. |
| 231 | M & L for replacement of old damaged shutter of Table writing W/drawer of size as per drg with pre laminated particle board with exterior grade with decorative choice lamination in one side & bolaning white & providing 4 mm thick teak wood beading to all round exposed edge complete all as directed by Engineer-in-charge. |
| 232 | M & L for replacement of unserviceable back side of Table writing W/drawer with new 6 mm thick teak veneer BWR plywood commercial ISI marked, complete all as directed b y Engineer-in-charge. |
| 233 | M & L replacement of drawer of Table writing with drawer of size as per drg made out of 12 mm thick BWR plywood & 06 mm thick BWR plywood or bottom including 25 mm knob PVC best quality fixed with GI screw to drawer, complete all as directed b y Engineer-in-charge. |
| 234 | M & L replacement of existing unserviceable Top of Table writing W/drawer with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top complete all as directed by Engineer in charge. |
| 235 | M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE WRITING WITH DRAWER with GI screw, complete all as directed by Engineer in charge. |
| 236 | CHAIR DINING CUSHION LONG BACK (FD-357) M & L for replacement of front leg of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge. |
| 237 | M & L for replacement of rear leg of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge. |
| 238 | M & L for replacement of side rail of seat of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge. |
| 239 | M & L for replacement of stiffener of legs of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge. |
| 240 | M & L replacement of unserviceable back rest of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge. |
| 241 | M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Chair Dining Cushion long back with GI screw, complete all as directed by Engineer in charge. |
| 242 | M & L replacement of unserviceable wooden seat of Chair dining cushion long back with new ply seat made out of 06 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge. |
| 243 | M & L for replacement of existing unserviceable foam & Rexene from chair dining cushion long back with new 50 mm thick foam 32 density with superior quality Rexene at seat & back necessary fitting to back& all as directed by Engineer in charge. |
| 244 | Material and labour for Preparation of wooden surfaces of bed hard by removing the scratches, spot and dots etc with abrasive cloth & matching the colour with Raw/burnt saina (As per Drawing) including a coat of wooden filler and polishing with French polish up to standard quality with one or more coats for Bed Hard to the entire satisfaction of Engr-in-Charge and as specified. |
| 245 | (Drg No. FD-45, FD-237) All as ser item No - 25 but for Book case complete all as specified and directed. |
| 246 | (Drg No. FD-241, FD-26 (M,) FD-1114) All as ser item No - 25 but for Side board complete all as specified and directed. |
| 247 | (Drg No. FD-252, FD-27 (M) All as ser item No - 25 but for Stool dressing complete all as specified and directed. |
| 248 | (Drg No. FD-277 FD-384 FD-238) All as ser item No - 25 but for table pegcomplete all as specified and directed. |
| 249 | (Drg No. FD-248 FD-210 FD-276) All as ser item No - 25 but for table bed side complete all as specified and directed. |
| 250 | (Drg No.FD-235, FD-274, FD-29) All as ser item No - 25 butt for table centre complete all as specified and directed. |
| 251 | (Drg No.FD-273, FD-1115) All as ser item No - 25 but for table dinning 6/8 personscomplete all as specified and directed. |
| 252 | (Drg No. FD-230, FD-31) All as ser item No - 25 but for table dressing gents W/M complete all as specified and directed. |
| 253 | (Drg No. FD-251, FD-378) All as ser item No - 25 but for table dressing ladies W/M complete all as specified and directed. |
| 254 | (Drg No. FD-275, FD-249) All as ser item No - 25 but for table writing medium complete all as specified and directed. |
| 255 | (Drg No. FD-232, FD-278, FD- 382) All as ser item No - 25 but for Teapoy complete all as specified and directed. |
| 256 | (Drg No. FD-373/ 113) All as ser item No - 25 but for Sofa Set 4/5 complete all as specified and directed. |
| 257 | (Drg No. FD-229 & 1108) All as ser item No - 25 but for Chair Easy/NFcomplete all as specified and directed. |
| 258 | (Drg No. FD-227 & 1105) All as ser item No - 25 but for Chair Dinning/Chair Dinning long back complete all as specified and directed. |
| 259 | All as ser item No - 25 but for Chair Writingcomplete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
