|
| 1 | Dismantling existing unserviceable Aluminium conductors, steel reinforced (ACSR conductor) from overhead lines on LT poles, of any type and any size complete all as specified and as directed by Engineer-in-charge |
| 2 | Disconnecting and re-stretching ACSR conductor of any size and re-fixing with and including new 2mm dia aluminum binding wire complete all as specified.Note :- (i) The rate quoted by the contractor shall deemed to be included for cutting / trimming of tree branches touching / approaching the LT over lines upto 3 metre width on each side with hacksaw / axe to clear the LT line including disposal of trimmed branches 100 metre away inside the cantonment area & cleaning site as directed by Engineer-in-charge.(ii) Length of each conductor shall be measured as one length. |
| 3 | S&F in replacement GI wire including stretching on LT poles as contineous earth wire or for guarding and cradles including binding as required complete all as specified and directed by Engineer-in-Charge.Note: -(i) For payment purpose, weight of galvanised wireshall onlybe considered. Clamps, eye hooks where provided shall be measured and paid for separately |
| 4 | Supplying, fixing & stretching aluminium conductor steel, reinforced (ACSR) of any size fixed on LT poles fixed on insulators and binding with & including 2 mm binding wire complete all as specified and directed by Engineer-in-Charge. Notes: - (i) The ACSR conductors shall be conforming to IS-398 (Part-II) and as specified in SSR Part-I.(ii) The unit rate quoted shall also be deemed to include for supply and fixing of binding wire, aluminum tapes etc. which shall not be included in the weight of conductors for payment.(iii) Weight of conductors shall be determined by measuring the horizontal distance between centers of two adjacent poles and compounding the weight of conductors of that size multiplied by length of span and 3% extra shall be added for sag, jointing, jumpers etc.(iv) Weight of the conductors shall be calculated from the nominal weights given in tables in the relevant IS. |
| 5 | S&F in replacement shackle type insulators, vitreous porcelain white, brown or green for working pressure 1100 volts grade of 100 mm height and 115 mm dia including galvanized mild steel straps of 31mm x 5mm size,14mm dia insulator bolts, washers and nuts complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F in replacement pin type insulator of size 100mm height, 65 mm diaporcelain, vitreous white, brown or green insulator suitable for 1100 volts grade including one galvanized mild steel spindle, two GI washer and one GI nutcomplete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down complete high mast light fitting including 150-200 watt flood light for finding out faults and refixing the same in existing position after carrying out necessary repair / replacement of unserviceable parts like parts like SPD / driver / LED chip board and wiring with 4 sqmm 3 core copper PVC cable, tightning of loose connection and cleaning of glass complete all as specified and directed by Engineer-in-Charge.Notes :- (i) The accessories like driver, chipboard which are required to be replaced shall be measured and paid for separately as “Supply only” under srl item No 8 & 9 of BOQ here-in-after.(ii) Ladder wheel shall be arranged by the Contractor.(iii) Detection and rectification of fault in over head/under ground line shall be done by the contractor. |
| 8 | Supply only in replacement electronic driver 220/240 volts suitable for existing LED flood light fitting 150 /200 watts complete all as specified and directed by Engineer-in-Charge.Make :- Wipro / Philips / Syska / Crompton / Surya or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 9 | Supply only in replacement chip board suitable for existing LED flood light fitting 150 /200 watts complete all as specified and directed by Engineer-in-Charge.Make :- Wipro / Philips / Syska / Crompton / Surya or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 10 | Inspection/Checking of street light fitting 30/45/60/72/90 watt LED light fittings etc for tighting the connection with replacement of twin core multi stranded 1.5 sqmm aluminium wire complete all as specified and directed by Engineer-in-Charge.Notes :- (i) Ladder wheel shall be arranged by the Contractor.(ii) The cost of wire replaced will not be paid seprately in over head conductors. |
| 11 | Taking down street light fitting upto 30/45/60/72/90 watt LED light fittings etc for finding faults including cleaning glass with castic soda solution and refixing the same in existing position after carrying out necessary repair / replacement of unserviceable parts complete all as specified and directed by Engineer-in-Charge.Notes :- (i) The accessories / spare parts which are required to be replaced shall be measured and paid for separately as “Supply only” under srl item No 12 to 17 of BOQ here-in-after.(ii) Ladder wheel shall be arranged by the Contractor.(iii) Detection and rectification of fault in over head/under ground line shall be done by the contractor. |
| 12 | Supply only in replacement electronic driver 220/240 volts suitable for existing LED Street light fitting 45 watts complete all as specified and directed by Engineer-in-Charge.Make :- Wipro / Philips / Syska / Crompton / Surya or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 13 | Supply only in replacement electronic driver 220/240 volts suitable for existing LED Street light fitting 60 watts complete all as specified and directed by Engineer-in-Charge. Make :- Wipro / Philips / Syska / Crompton / Surya or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 14 | Supply only in replacement electronic driver 220/240 volts suitable for existing LED Street light fitting 72 watts complete all as specified and directed by Engineer-in-Charge.Make :- Wipro / Philips / Syska / Crompton / Surya or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 15 | Supply only in replacement electronic driver 220/240 volts suitable for existing LED Street light fitting 90 watts complete all as specified and directed by Engineer-in-Charge.Make :- Wipro / Philips / Syska / Crompton / Surya or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 16 | Supply only in replacement 10 KV surge protector suitable for LED fittings 45 / 60 / 72 / 90 watts complete all as specified and directed by Engineer-in-Charge.Make :- Crompton Cat part No SRPSQ-10KV/5KA-440 or equivalent in makes mentioned in Appendix \"A\" here-in-after.B25 |
| 17 | Supply only weather proof PVC insulated, sheathed three core stranded aluminium conductor cable of size 2.5 Sqmm, 1100 Volts grade conforming to IS:9968 (Part-I) 1988 or IS:694-1990 complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in repair street light bracketmade out of 32mm dia GI pipe light grade 1.2m long , bent to shapeat 120 degree angle from vertical fixed along pole with and including required number of clamp made out of Flat iron 25mm x 6mmwith nuts, bolts ,washers etc. duly painted with two coats of aluminium paint over a coat of red oxide primer completeall as specified and as directed by Engineer-in-charge. |
| 19 | Disconecting and taking down existing unservicable unserviceable street light fittings of any type and make along with accessories as directed by Engineer-in-charge.Notes:- (i) Any T & P and Ladder wheel required for the work shall be arranged by the Contractor. The rate of this aspect is included in this item and nothing extra shall be paid on this account. |
| 20 | Supply and fixing energy efficient LED street light fitting of 45W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications and all as directed by Engr-in-Charge :-(a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt.(b) Input Voltage range : 140 to 270 volts(c) Temp operating range : Minus 10°C to Plus 50°C(d) Power factor : Minimum 0.95(e) THD : Max10%.(f) CRI: Morethan 80 and CCT : 5700 K.(g) IP rating : IP66.(h) IK rating:Minimum IK07(j) Built in potted LED Driver of the make as of the luminaire.(k) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(l) Surge protection 10 kV (inbuilt + extended)(m) Lens - High Efficiency wide angle lens.(n) BIS Approved fixtures and driver(o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) |
| 21 | All as per Srl item No 20 above but LED street / security light of 60 wattNotes for srl Item No 20 & 21 :- (a) Tenderer shall submit test report of LED street light fitting from Government accredited test laboratory for LM - 79 and LM - 80 .(b) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. Contractor shall obtain warranty from the manufacturer of product on their letter head and submit the same to deparment alonwith his letter head. The product will be replaced free of cost in the following case :- (i) Manfacturing defects(ii) Failure due to mechanical and electrical impact.(iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries.(c) All LED light/luminare must meet the provision laid down in IS - 16101 , 16102 Part -I/II ,16103 Part -I , 16104 ,16105 ,16106 , 16108/2012 and 15885 Part -II / Section 13.(d) Scope of work shall include supply and fixing street light fittings on street light bracket fixed on poles, If street light fitting requires to fixed on existing street light bracket and any addition alterration required in bracket for fixing street light, In that case cost of additional / alteration is included in the unit rate of this item, which also includes needfulT & P andrequired accessories such as 1.5 sqmm, 3 core PVC insulated stranded copper conductor cable for connection from pole box to light fitting etc complete including making connection, testing etc complete .No extra payment is admissible on this account. (e) Light fittings shall be provided with 10 KV surge protection as mentioned in description of item. If 10 KV surge protection is not provided in light fitting for which cat part is mentioned in BOQ. Contractor has to provide light fitting with 10 KV surge protection without any extra cost to department.(f) Contractor shall write CA No on street light fitting with synthetic enamel paint which should be visible from ground level. Cost of the same is included in the unit rate of this item nothing shall be extra paid on this account. |
| 22 | S&F in replacement street light pole box of size not less then 300x200x105mm, made of high quality thermo plastic polystyrene, weather proof, dust, jet water proof, chemical, acid corrosion, impact, insulated & shock proof IP 65 for outdoor Installation with internallly embedded gasket (PUR) including MCB SP 6 Amps 01 No along with left side hinge door (notch arrangement not acceptable) & premoulded knockout all sides including back of the base must. The box fitted with 10 sqmm stud type terminal - 04 Nos including Elimex stud type TB 4 Nos. Note :- (i) Cost of flat iron clamp is deemed to included in unit rate of this items. Nothing extra shall be paid on this account.(ii) Size of junction box for different mafufacturer may slightly varried from size mentioned in description of item. Contractor has to provide junction box as per cat No mentioned against make of junction box. where cat No is not mentioned against any make, in that case junction box of size mentioned in description has to provide, if exact size of junction box is not available, then next higher size junction box has to be provided. Nothing extra shall be paid on this account. |
| 23 | S&F in replacement power contactor two pole of capacity 40 Amps, suitable for MU-2P with 220/240V, wide band coil complete all as specified and directed by Engineer-in-Charge.Make:- Legrand cat part No 416280 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 24 | Inspection/checking of APFC panel 3 phase, 440 voltage 50 Hz AC supply system to improve power factor 0.80 to 0.98 automatic step wise switched capacitor panel to make it serviceable with the help of connecting relays, capacitors, contactors, MCB\"s, CT\"s etc and rectifying the defects, replacement of unserviceable part as required at site and cleaning of AMF panel as detecting during inspection or pointed out by users/department and carry outmaintenance complete all as specified as directed by Engineer-in-charge.Note:- Spare parts required shall be measured and paid for separately under respective items of BOQ as supply only.. |
| 25 | Supply only in replacement of AIPFC micro processor based relay 4 Stage PFC CONTROLLER-BR-4904-04 ST RELAY 230V complete all as specified and as directed by Engineer in charge.. Make - L & T /GE / EPCOS / Siemens / Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 26 | Supply only in replacement of AIPFC micro processor based relay 8 Stage PFC CONTROLLER-BR-4000-08 ST RELAY 230V complete all as specified and as directed by Engineer in charge.. Make - L & T /GE / EPCOS / Siemens / Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 27 | Supply only in replacement of AIPFC micro processor based relay 12 Stage BR6000 SERIES 12 STP RELAY 230V complete all as specified and as directed by Engineer in charge.. Make - L & T /GE / EPCOS / Siemens / Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 28 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 1 KVAR complete all as specified and as directed by Engineer in charge.Make - Epcos Cat part- B32447A4012B 40 / GE/L& T / Siemens / Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 29 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 2 KVAR complete all as specified and as directed by Engineer in charge.. Make - Epcos Cat part- B32447A4022B 40 / GE / L& T / Siemens / Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 30 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 3 KVAR complete all as specified and as directed by Engineer in charge.. Make - Epcos Cat part- B32448A4032B 40 / GE/L& T / Siemens /Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 31 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 4 KVAR complete all as specified and as directed by Engineer in charge.Make - Epcos Cat part- B32448A4042B 40 / GE / L& T / Siemens /Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 32 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 5 KVAR complete all as specified and as directed by Engineer in charge.Make - Epcos Cat part- B32448A4052B 40 / GE / L& T / Siemens /Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 33 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 10 KVAR complete all as specified and as directed by Engineer in charge.Make - Epcos Cat part- B32448A4102B 40 / GE / L& T / Siemens / Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 34 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 12.5 KVAR complete all as specified and as directed by Engineer in charge.. Make - Epcos Cat part-B32448A4122B540 / GE / L& T / Siemens / Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 35 | Supply only in replacement of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 15 KVAR complete all as specified and as directed by Engineer in charge.. Make - Epcos Cat part- B32448A4122B540 / GE / L& T / Siemens /Crompton or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 36 | S&F in repair of Heavy duty Capacitor 3 Phase, 415Volt (AC), 50 HZ of cap 25 KVAR complete all as specified and as directed by Engineer in charge.. Make - Epcos Cat part- B32448A4252B 40 / GE / L& T / Siemens /Crompton / Epcos or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 37 | Supply only in replacement of Capacitor duty contactors 3 Phase suitable up to 10 KVAR cap Duty cont 1 NO1NC240V complete all as specified and as directed by Engineer in charge.. Make - EPCOS Cat Part No B44066S1011C240N 1 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 38 | Supply only in replacement of Capacitor duty contactors 3 Phase suitable up to 16 KVAR cap Duty cont 1 NO1NC240V complete all as specified and as directed by Engineer in charge.Make - EPCOS Cat Part No B44066S1611C240N 1 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 39 | Supply only in replacement of Capacitor duty contactors 3 Phase suitable up to 25 KVAR cap Duty cont 1 NO1NC240V complete all as specified and as directed by Engineer in charge.. Make - EPCOS Cat Part No B44066S2511C240N 1 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 40 | S&F in repair of MCB 6 to 32 Amps, 3 pole, C curve, 10 KA complete all as specified and as directed by Engineer in charge.. Make: - Legrand Cat Part No: - 408650 to 58 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 41 | S&F in repair of MCB 40 Amps, 3 pole, C curve, 10 KA complete all as specified and as directed by Engineer in charge.. Make: - Legrand Cat Part No: - 408659 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 42 | Supply only in replacement of current transformer of ratio 100/5, 5 VA with accuracy class 1.0 including connection with 2.5 sqmm twin core PVC cable complete all as specified and as directed by Engineer in charge. |
| 43 | Supply only in replacement of current transformer of ratio 200/5, 10 VA with accuracy class 1.0 including connection with 2.5 sqmm twin core PVC cable complete all as specified and as directed by Engineer in charge. |
| 44 | S&F in replacement pre-stressed cement concrete pole, 9 metre long of cross section 102mm x 172mm at top and 102mm x 279mm at bottom, class 10, complying with requirements of IS-1678-1998 erecting truly in vertical position including painting of poles with two coats of synthetic enamel paint over a coat of primer in alternate strip of 30cm each in black and yellow colour up to 1.5 metre height from top of PCC pedestal/coping of poles including numbering of poles with synthetic enamel paint black in 80mm high letters over 150mm x 230mm yellow base made from synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Note:PCC for foundation and earth work shall be measured and paid for separately. |
| 45 | Disconnecting over head conductors and insulators any Nos on existing damaged steel tubularswaged LT poles, dismantling MS work such as cross arms /clamps/hooks etc, stay and street light (where exists), excavating and taking out damaged pole making good hole to receive new pole and S&F in same position new steel tubular swaged pole 09 meter long type 410SP-31, re-fixing the MS work cross arms/clamps/hooks etc and insulators retrieved from dismantling and re-jointingthe conductors with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.5 metre height from PCC coping and applying two coats of aluminium paint to remaining portion of pole, over cross arms, brackets, bracings, clamps, hooks etc and marking pole number complete all as specified and as directed by Engineer-in-charge. |
| 46 | M&L for painting on steel tubular poles 9metre long including attachments (cross arms, clamps GI pipes etc) complete with one coat of aluminium paint after preparation of steel surfaces and black & yellow strips 30cm each upto 1.5 metre height from top of PCC foundation block or PCC coping including numbering of poles with synthetic enamel paint (Black) in 80mm high letters over 150mmx230mm yellow base complete all as specified and directed by Engineer-in-charge. |
| 47 | M&L for preparation of old painted surfaces of PCC pole and applyingtwo coats of synthetic enamel paint in black and yellow colour in alternate strips of 30 cm each upto 1.50 metre height from top of PCC coping and applying two coat of aluminum paint over cross arms, brackets, bracings, clamps, hooks etc. and marking pole number with white synthetic enamel paint in 80mm high letters, over black synthetic enamel paint base of size 20cm x 20cmincluding applying two coats of white wash to coping of polesall as specified and directed by Engineer-in-Charge.Note :-Pole number shall be marked with white enamel paint over a base of size 20cm x 20cm prepared with two coats of blackenamel paint on pole surfaces. |
| 48 | M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of poles etcincluding weathering, slightly rounded or chamfered angle and throating, necessary form work and fair finishing all exposed faces of concrete without using extra cement complete all as specified and directed by Engineer-in-charge |
| 49 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation of poles, filling & mass concrete including necessary form work completeall as specified and directed by Engineer-in-charge . |
| 50 | M & L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation for stays & mass concrete including necessary form work and fair finishing completeall as specified and directed by Engineer-in-charge |
| 51 | Suppyling, installing, testing in replacement and commissioning of factory made outdoor type bus bar chamber outer shell shall be made out of 3.15mm thick CRCA sheet duly powder coated siemens gray shade and completely weather, vermin & dust proof, adequate air ventilation at sides & back, outer door shall be provided with double door fix with hinges and locking arrangements etc suitables to accomodate the 160 Amps aluminium bus bar fixed horizontally in staggred manner minimum length 450mm, 3 phases and neutral duly insulated with heat shrinkable PVC sleeves and colour coded mounted on heavy duty DMC insulators duly connected with 160 Amps MCCB including provision for taking out incoming and outgoing cable detacheable plate at bottom for cable entry and making six Nos hole in each bus bar including with bottom frame made out of angle iron 50mm x 50mm x 5mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces groutedin PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm complete all as specified and directed by Engineer-in-Charge.Note :- (i) Cost of PCC, excavation and earth work is included in the unit rate of this item nothing extra shall be paid on this account.(ii) All cables to be connected with busbar will be properly thimbles. |
| 52 | All as per item No 51 above but MCCB 100 Amps, 4 pole, 415 volts and 100 Amps aluminium bus bar |
| 53 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thickpacked layer of charcoal dust and common salt, connected to galvanized iron strip 32mm x 6mm thick as earth leadby means of bolts, nuts and washers of galvanised iron or steel and thimbles and other end of the earth strip connected to earthing test point/equipment and protected by galvanised iron pipe light grade 40mm dia upto earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia GI medium grade of length 2.25 metre and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mmthick pre-cast RCC (1:2:4) type B-0cover with 40mm x 40mm x 3mm MS angle iron frame, excavation & earth work completeall as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 including taking down old earthing complete all as specified and directed by Engineer-in-charge.Notes :- (i) GI strip upto earth test point/equipment is included in this item.(ii) Outer edge of earth pit shall be 1.5 metre away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement for earth pit cover shall be 1 kg . |
| 54 | Laying, jointing, commissioning and testing in replacement XLPEinsulated screened PVC bedded, armoured,heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 185 sq mm 3.5 core confirming to IS-7098 (Part-I-1988) laid in trenches, along poles through pipes etc complete all as specified and directed by Engineer-in-charge.Notes :- (i)Excavation, earth work, sand cushioning, cable protection and GI pipe shall be measured & paid for separately under respective items of BOQ(ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall deemed to be inclusive of the above provisions.(iii) Cable required for laying shall be issued under Schedule \"B\" free for fixing only. |
| 55 | Supplying, laying, jointing, commissioning and testing XLPEinsulated screened PVC bedded, armoured,heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 400 sq mm 3.5 core confirming to IS-7098 (Part-I-1988) laid in trenches, along poles through pipes etc including taking down old unserviceable cable complete all as specified and directed by Engineer-in-charge.Notes :- (i)Excavation, earth work, sand cushioning, cable protection and GI pipe shall be measured & paid for separately under respective items of BOQ(ii) Road cutting / floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall deemed to be inclusive of the above provisions. |
| 56 | All as per item No 55 above but cable of cross sectional area 240 sq mm 3.5 core |
| 57 | All as per item No 55 above but cable of cross sectional area 120 sq mm 3.5 core |
| 58 | All as per item No 55 above but cable of cross sectional area 95 sq mm 3.5 core |
| 59 | All as per item No 55 above but cable of cross sectional area 70 sq mm 3.5 core |
| 60 | All as per item No 55 above but cable of cross sectional area 50 sq mm 3.5 core |
| 61 | All as per item No 55 above but cable of cross sectional area 35 sq mm 3.5 core |
| 62 | All as per item No 55 above but cable of cross sectional area 25 sq mm 3.5 core |
| 63 | All as per item No 55 above but cable of cross sectional area 16 sq mm 4 core |
| 64 | All as per item No 55 above but cable of cross sectional area 16 sq mm 2 core |
| 65 | All as per item No 55 above but cable of cross sectional area 10 sq mm 2 core |
| 66 | Supplying, jointing and testing heat shrinkable typestraight through jointing kit, suitable for cable of size 16 to 50 Sqmm, 3.5 core aluminium conductor1100 Volts including making connectionscomplete all as specified and directed by Engineer-in-Charge. |
| 67 | All as per item No 66 above but suitable for cable of size 70 sqmm to 120 sqmm. |
| 68 | All as per item No 66 above but suitable for cable of size 150 sqmm to 185 sqmm. |
| 69 | All as per item No 66 above but suitable for cable of size 240 sqmm to 300 sqmm. |
| 70 | Supplying, jointing and testing heat shrinkable type, in / out door, end termination jointing kit, suitable for cable of size 25 to 50 Sqmm, 3.5 core aluminium conductor1100 Volts including making connectionscomplete all as specified and directed by Engineer-in-Charge. |
| 71 | All as per item No 70 above but suitable for cable of size 70 sqmm to 120 sqmm. |
| 72 | All as per item No 70 above but suitable for cable of size 150 sqmm to 185 sqmm. |
| 73 | All as per item No 70 above but suitable for cable of size 240 sqmm to 300 sqmm. |
| 74 | Cutting/ trimming of tree branches not exc 10cm girth touching/approaching the LT / HT overhead lines upto 3 metre width on each side with hacksaw/axe to clear the LT / HT line including disposal of trimmed branches100 Metre away inside the cantonment area & clearing site complete all as specified and directed by Engineer-in-Charge. (Approximate length of span 40 to 50 metre)Note:-The contractor shall be responsible to maintain this item of work till the date of completion work. Nothing shall extra be paid on this account. |
| 75 | Taking out old unserviceable underground LT Cable with standad aluminium conductor 1100 volts grade cross sectional area upto 95 Sqmm form trenches / floor / road / pipe / along poles and relaying in the same location after repair complete all as specified and directed by Engineer-in-Charge. Note : Excavation &earthwork shall be measured and paid seperately under respective items of BOQ. |
| 76 | All as per item No 75 above but cable of cross sectional area 120 sqmm to 300 sqmm |
| 77 | S&F in replacement stay assembly complete with accessories as shown in electrical plate No 1 using stay rod 16 mm dia x 1800mm long, stay bow 14mm dia and stay plate 30 cm x 30 cm x 6 mm including stay wire 8 SWG x 7 strands, loop type insulator with over all dimensions 90x140mm and clearence of hole 25.5mm, stay clamps and painting to exposed surfaces of mild steel work with two coats of aluminum paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.Note : Excavation,earthwork and PCC in foundation shall be measured and paid seperately under respective items of BOQ. |
| 78 | S&F in replacement cross arms, bracings, stiffeners, supports, clamps and back plates fabricated from structural steel confirming to Fe-290 (Gde E-165) including nuts, bolts, washers, welding, binding cold or hot, drilling holes for bolts, in any shape or size complete all as specified and directed by Engr-in-Charge.Note :Exposed steel surface shall be treated with two coats of synthetic enamel paint over a coat of red oxide primer and unexposed surface of steel sections shall be applied onecoat of red oxide primer. |
| 79 | Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth, or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or layingunderground cable and water supply / sewage pipe line etc.in soft rock / disintegrated PCC & getting out including taking out old brick or precast cable cover complete all as specified and directed by Engineer-in-Charge. |
| 80 | Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth, or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or layingunderground cable and water supply / sewage pipe line etc.in soft / loose soil & getting out including taking out old brick or precast cable cover complete all as specified and directed by Engineer-in-Charge. |
| 81 | All as per serial item No. 80 here-in-above but depth exc 1.5 mtr & not exc 3mtr |
| 82 | Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge. |
| 83 | Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and directed by Engineer-in-charge. |
| 84 | M&L for dry sand (Tibba sand) and punning for cushioning to underground cable complete all as specified and directed by Engineer-in-chargeNote: - For payment purpose thickness after punning shall be measured. |
| 85 | M & L for brick protection with old size sub class \"B\" bricks laid flat, length of bricks across the route of underground cable all as specified and directed by Engineer-in-Charge. |
| 86 | S&F in replacement Galvanized iron tubing, 100mm bore light grade, ISImarked, including all fittings and laid in trenches / under road / drains, fixed to poles / walls with required numbers of clamps made out of 25x3mm flat iron, bolts, nuts and washers for protection of LT electric cable complete all as specified and as directed by Engineer-in-charge.Notes :- (i) Excavation & earthwork shall be measured & paid for separately under respective items of BOQ(ii) Cost of flat iron clamp if required is included in the unit rate of this item. Nothing extra shall be paid on this account. |
| 87 | All as per item No 86 above but 80mm bore tubing |
| 88 | All as per item No 86 above but 50mm bore tubing |
| 89 | All as per item No 86 above but 40mm bore tubing |
| 90 | M&L for preparation of existing painted surfaces of Panel Board / Feeder Pillar box(indoor / outdoor type), area not exceeding 10 square metre each and applying one coat of synthetic enamel paint after preparation of surfaces on external and internal surfaces of approved tint by using spray machineinclusive of writing SM / MES No / name of feeders etc.(not exceeding of height 5 cm each) including welding of broken panel door, tightening electric connection of switch gears and cleaning of vegetation all around the panels up to one meter from all sides complete all as specified and as directed by Engineer-in-charge. |
| 91 | S&F in replacement MCCB 4 Pole 100 Amps, thermal magnetic releasehaving, breaking capacity 25 KA, 415 Volt in the existing feeder pillar box including any addition / alteration to the panel to accommodate the new MCCB & making connections with 25x3 mm copper strip as required from main bus bars,making necessary welding work, metal work for fixing base plate etc and connectionscomplete all as specified and as directed by Engineer-in-Charge.Make : Legrand Cat Part No. DPX³ 160 420055 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 92 | All as per item No. 91 here-in-before but MCCB 4 Pole, 125 Amps rating, breaking capacity 25 KA, 415 Volt Make : Legrand Cat Part No. DPX³ 160 420056 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 93 | All as per item No. 91 here-in-before but MCCB 4 Pole, 160 Amps rating, breaking capacity 36 KA, 415 Volt Make : Legrand Cat Part No. DPX³ 160 420097 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 94 | All as per item No. 91 here-in-before but MCCB 4 Pole, 250 Amps rating, breaking capacity 36 KA, 415 Volt Make : Legrand Cat Part No. DPX³ 250 420249 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 95 | All as per item No. 91 here-in-before but MCCB 4 Pole, 400 Amps rating, breaking capacity 36 KA, 415 Volt Make : Legrand Cat Part No. DPX³ 630 422007 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 96 | All as per item No. 91 here-in-before but MCCB 4 Pole, 630 Amps rating, breaking capacity 50 KA, 415 Volt Make : Legrand Cat Part No. DPX³ 630 422023 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 97 | S&F LT Line polypropylene composite phase separator, moulded or bolted type, overall length 360mm, width 25mm, thickness 12mm, suitable for 2-lines wire complete all as specified and as directed by Engineer-in-charge. |
| 98 | S&F LT Line polypropylene composite phase separator, moulded or bolted type, overall length 640mm, width 25mm, thickness 12mm, suitable for 3-lines wire complete all as specified and as directed by Engineer-in-charge. |
| 99 | S&F LT Line polypropylene composite phase separator, moulded or bolted type, overall length 940mm, width 25mm, thickness 12mm, suitable for 4-lines wire complete all as specified and as directed by Engineer-in-charge. |
| 100 | S&F LT Line polypropylene composite phase separator, moulded or bolted type, overall length 1250mm, width 25mm, thickness 12mm, suitable for 5-lines wire complete all as specified and as directed by Engineer-in-charge. |
| 101 | S&F in replacement MCB, four Pole 63 Amps, having breaking capacity 10 KA, \"C\" Curve complete all as specified and directed by Engineer-in-Charge.Make :-Legrand Cat Part No 408702 or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 102 | S&F in replacement air termination, single pointed aluminium rod 12 mm dia single pointed 300 mm longcomplete all as specified and directed by Engineer -in-Charge. |
| 103 | S&F in replacement galvanized iron strip of size 32 mm x6mm to be used as down conductor for lighting protection and to arrange ring main circuitfor earth pit complete all as specified and directed by Engineer -in-Charge. |
| 104 | S&F in replacement Digital type Voltmeter 96mm x 96mm, of range 0-500 volts, class -1 complete all as specified & as directed by Engineer-in-charge |
| 105 | S&F in replacement Digital type Ammeter 96mm x 96 mm of range 0-200 Amp, single phase, class -1 complete all as specified & as directed by Engineer-in-charge |
| 106 | S&F in replacement selector switch rotary type, flush button, 3 way position in one for voltmeter or Ampmeter of any range as per existing complete all as specified & as directed by Engineer-in-charge |
| 107 | S&F in replacement Phase indicator lamp assembly LED type complete with indicator lampincluding making connections with 2.5 Sq mm copper conductor PVC insulated and PVC sheathed single core cable complete all as specified and as directed by Engineer-in-charge. |
| 108 | S&F in replacement 100mm size mild steel butt hinges cold rolled medium weight complete all as specified & directed by Engineer-in-Charge. |
| 109 | S&F in replacement 250mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed by Engineer-in-Charge. |
| 110 | S&F in replacement heavy duty TPN bus bar chamber 100 Amps, 4 way fixed with hinges and locking arrangements, wall mounting type and arrangements for 4 Nos incoming / outgoing connections in each bus bar fixed on wall complete all as specified & directed by Engineer-in-Charge.Make :- Havells Cat Part No IHBC010004 / Legrand / L&T or equivalent in makes mentioned in Appendix \"A\" here-in-after. |
| 111 | M&L for fixing MS sheet 2mm thick to existing LT panels / feeder pillar box including necessary straightening / correcting the distorted parts, cuttings, welding / riveting, drilling bend to shape as required, welding of hinges, sliding door bolts, locking arrangement, nut, bolts, washers etc and appying two coats of synthetic enamedled paint over a coat of red oxide primer to match with the existing surfaces comlepte including butt hinges sliding door bolts and taping , thimbling disconnecting all incoming and outgoing complete all as specified and as directed by Engineer-in-charge.Note :- Supply only butt hinges and sliding door bolts shall be measured and paid seperately under respective items of BOQ. |
| 112 | Inspection/Checking and calibration of weighing machine of capacity 30 Ton by checking/repairing all the connections and cleaning of load beam cell etc to make the machine seviceable and to measure acctual weight by replacing defective parts complete all as specified and directed by Engineer-in-Charge.Note :- The cost of replaced parts is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.----------------------------------------------------------------------------Note :-A sum of Rs. 243121/- will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 33 & 34 (Schedule of Credit) of Tender documents. |
