Bids Are Invited For 1 Items 1 Providing Desk Cum Bench (front & rear) Size: 1140x1095x700 mm. The desk top panel is made from 11mm thk Compact Laminate board with decorative paper on both sides (as per ISO 2046:1995). The panels have corners rounded f, Panchkula-Haryana

Bids Are Invited For 1 Items 1 Providing Desk Cum Bench (front & rear) Size: 1140x1095x700 mm. The desk top panel is made from 11mm thk Compact Laminate board with decorative paper on both sides (as per ISO 2046:1995). The panels have corners rounded for safety usage. All understructure side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating. The Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating. The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobular screws(As per DIN 7500) with Zn blue plating(As per IS 1573:1986). Compact Laminate seat and back panels are assembled using M6 Countersunk trilobular screws(As per DIN 7500) with Zn black plating(As per IS 1573:1986). Spacers are provided on the top of round tubes for wooden panels fixing.They are made of PP Glass filled(30%). Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product. M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. The OEM Should have the Quality and Safety Certification like ISO 9001: 2015, ISO 14001:2015, OHSAS 45001:2018. Product Should have Greengaurd, Indoor air Quality Certification for LOW VOC Contenet. The certiifcate must be verifiable from the authorised issuers website. 2 Item 2 Providing Desk Cum Bench meadal)size shall be 1140x795x700 mm. The desk top panel is made from 11mm thk Compact Laminate board with decorative paper on both sides (as per ISO 2046:1995). The panels have corners rounded for safety usage. All understructure side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating. The Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating. The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobular screws(As per DIN 7500) with Zn blue plating(As per IS 1573:1986). Compact Laminate seat and back panels are assembled using M6 Countersunk trilobular screws(As per DIN 7500) with Zn black plating(As per IS 1573:1986). Spacers are provided on the top of round tubes for wooden panels fixing.They are made of PP Glass filled(30%). Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product. M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. The OEM Should have the Quality and Safety Certification like ISO 9001: 2015, ISO 14001:2015, OHSAS 45001:2018. Product Should have Greengaurd, Indoor air Quality Certification for LOW VOC Contenet. The certiifcate must be verifiable from the authorised issuers website. 3 item 3 Table with CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Product should be GREENGUARD, GRIHA, certified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuers website. Product should be GREENGUARD, GRIHA certified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuers website. 15 4 Item 4 Revolving Chair SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. . TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The S shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the backspine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. Product should be GREENGUARD GOLD, GREENPRO, SCS IAQ, certified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuers website. Title Additional Items Total Quantity : 72

Refer document

Refer document