Himachal Pradesh State Electricity Board-HPSEB has published Supply, Installation, Testing And Commissioning Of 1 No. 20 Hp / 15 Kw Dual Motor Submersible Slurry Pump With Silt Agitator Having Flow Discharge Of Minimum 2500 Lpm And Should Have Capabilityto Handle The Particle Sizeof Minimum-75 Mm Or Above And Sup. Submission Date for this Tender is 23-02-2022. Raw Materials Processing Machinery Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Laying and Jointing PVC Pipe. Heading |
2 | Supply, installation, testing and commissioning of followingProduct with specification detailed below: - Type Slurry Submersible Pump with Agitator, ApplicationWet well, Quantity 1No’s. MOTOR H.P. /K.W. 20.0/15.0, Speed in RPM (Syn.) 1450, Supply System 415 V, 3Phase, 50Hz., Ac Supply, Max Current 28Amp., Temperature Ambient, Insulationclass of winding wire ‘F’ Class, Protection IP 68, Starter Type –Soft Starter, Cable 1x4CX20.0 Sq. mm 200 Mtr. At least or as per site requirement PVC insulated double sheathed copper conductor flexible cable. PUMP Discharge outlet Size 150mm, Free passage for suspended solid particles 85 mm, Head in MWC 20 Mtr., Discharge capacity 2500 LPM. MATERIAL OF CONSTRUCTION Pump casing CI IS FG 260+2% NI, Motor of body, top cover, oil chamber, wear plate CI IS 210 FG 260, Handles S.S., BearingsBall Bearing Grease Lubricated, Impeller S.S. 410 Harden, Strainer S.S., Additional Stool M.S. Fabricated, Mech. Seal Sic/Sic & S/Cr. Steel. |
3 | Providing, installation, testing and commissioning of Control Panel, Float Type Level Switch and Cables as detailed in clause 3.04, 3.05 and 3.07 of the technical specification (Section III) of the tender document |
4 | Providing additional Two No. Motors as detailed in clause 3.06 of Section III of (Technical Specification) of the tender document. |
5 | Providing and fixing of 3 No.AC Micro ControllerModel: PACMPD , type: TWIN , Range: 7-18 Amp. Aux. Supply 0-13VAC, 0-11VAC, Special- 5Sec |
6 | Spares as defined in clause 3.08 of Section III of the tender specification. |
7 | Construction of chamber for 100mm sluice plates |
8 | Construction of chamber for 100mm sluices valve |
9 | Supplying, Conveying and fixing spls. Including ea |
10 | Supplying, Conveying and fixing spls. Including eart |
11 | Construction of chamber for 100mm sluice plates |
12 | Construction of chamber for 100mm sluices valve |
13 | Laying and Jointing PVC Pipe. Heading |
14 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using |
15 | Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost |
16 | Construction of chamber for 100mm sluices valve |
17 | Construction of chamber for 100mm sluices valve |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail