Proposed Construction Of Sinhagad Entrance Gate On South Side Of Buldana-Chikhli Highway In Muncipal Limit
Tender Value
30.11 Lakhs
Estimated cost
Bid Submission
21 Feb 2022
0 days left
EMD
30120
Bank guarantee accepted
Document Fee
3200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
buldana → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Construction Of Sinhagad Entrance Gate On South Side Of Buldana-Chikhli Highway In Muncipal Limit
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area, stackingand/or spreading as directed, including dewatering , preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting as necessary complete.(LIFT UPTO 1.5 M) |
| 2 | Excavation for foundation in hard murum & Boulders including removing the excavated materials up to a distance of 50 metres, beyond the building area & stackingand/or spreading as directed, including dewatering,preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete(Lift upto 1.5m ) |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with sand / grit ramming, watering etc complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 5 | Providing and laying in situ cementconcrete M-20 oftrap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions including plywood/steel formwork, compaction, curing & rounghing the surface if special finish is to be provided, finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface etc. complete. (Excluding reinforcement and strucural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 6 | Providing and casting in situ cement concrete M-20 of trap granite/quartzite/gneiss metal for R.C.C. columns as per detaileddrawing and designs, or as directed including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. In cuding use of plastisizer wherver necessary as directed Engineer in charge (Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 7 | Providing and casting in situ cement concrete M-20 of trap granite/quartzite/gneiss metal for R.C.C. Beams and lintels as per detaileddrawing and designs, or as directed including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. In cuding use of plastisizer wherver necessary as directed Engineer in charge (Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 8 | Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and including steel centering, plywood/steel formwork, compaction,finishing uneven and honeycombed surface with 1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided with fan hook box of 2mm thick M.S. Sheet rectangular size 180mmx100mm with required depth with holes or notches as required, bottom and top lids of 1.6mm thick M.S Sheet fixed with 3.5 mm dia. round headed screws together with 12mm dia M.S. bar bent to shape with hooke and painting to exposed surface and curing etc. complete.(Excluding reinforcement and structural steel including cover block)the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, trapaulin etc. (Wooden Centering will no be allowed.) |
| 9 | Providing and casting in situ cement concrete in M-20 of trap/granite /quartzite/gneiss metal for R.C.C. pardiof given thickness including centering, formwork, compaction, finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or and roughening them if special finish is to be provided and curing etc complete. ( Excluding reinforcement.) |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken) |
| 11 | Providing 2nd class Burnt Bricks masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructureincluding striking joints , raking out joints, watering and scaffolding .complete. |
| 12 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee |
| 13 | Providing sand faced plaster forexternal position in cement mortar using kharsalia/ kasaba or similar type of sand, in all position including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. |
| 14 | Providing Granite sills/Jambs/revels of 18mm to 20mm thick of appvoved quality vein and colour with machine polished surface on a bed of Cement mortar 1:4 including neat cement float, filling joints with neat cement slurry, curing, polishing & cleaning etc. complete. |
| 15 | Providing and applying Texture plaster with finishing with texture materialof approved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. |
| 16 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 17 | Providing & Fixing mat finish stainless steel lettering of various heights as directed by Engineer in-charge including material, labour, cleaning etc. complete. From 30 to 45 cm. height |
| 18 | METAL |
| 19 | SAND |
| 20 | 80 mm soling |
| 21 | C.C. Cube M-20 Grade |
| 22 | Cement |
| 23 | Sand |
| 24 | Course Aggregate |
AI Tender Summary
Tender Timeline
Feb 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender