Military Engineer Services-MES has published Repair / Maintenance Of Water Distribution Supply Lines And Cleaning Of O / H Tank, Ug Sump, Filtration Plant And Other Misc Works At Alhilal Mil Stn Repair / Maintenance Of Water Distribution Supply Lines And Cleaning Of O / H Tank, Ug Sump, Filtrati. Submission Date for this Tender is 04-03-2022. Sump Tenders in Kangra Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-03-2022 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, taking up/down or laying of GI tubing/CI/DI pipe etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard dense soil complete all as specified and directed. |
| 2 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed. |
| 3 | Removing excavated soil to a distance not exceeding 50m and depositingwhere directed at a level not exceeding 1.5mabove the starting point complete all as specified and directed. |
| 4 | Taking up or down old GI tubing 20mm bore and connections (including fittings) from trenches/walls /floorsand connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 5 | Taking up or down old GI tubing 25mm bore and connections (including fittings) from trenches/walls /floorsand connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 6 | Taking up or down old GI tubing 40mm bore and connections (including fittings) from trenches/walls /floorsand connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 7 | Taking up or down old GI tubing 50mm bore and connections (including fittings) from trenches/walls /floorsand connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 8 | Taking up or down old GI tubing 80mm bore and connections (including fittings) from trenches/walls /floorsand connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 9 | Taking up or down old GI tubing 100mm bore and connections (including fittings) from trenches/walls /floorsand connections including cleaning for re-fixing or remove to store yard/ credited to contractor complete all as specified and directed. |
| 10 | Taking up or down 100mm bore CI/DI pipes( including all fittings),with spigot and socket ends or flanged ends and lead joints including burning out joints,rubber joints from trenches/walls /floors including cleaning for re-fixing or remove to store yard/ credited to contractorcomplete all as specified and directed. |
| 11 | Taking up or down 150mm bore CI/DI pipes( including all fittings),with spigot and socket ends or flanged ends and lead joints including burning out joints,rubber joints from trenches/walls /floors including cleaning for re-fixing or remove to store yard/ credited to contractorcomplete all as specified and directed. |
| 12 | Taking up or down 200mm bore CI/DI pipes( including all fittings),with spigot and socket ends or flanged ends and lead joints including burning out joints,rubber joints from trenches/walls /floors including cleaning for re-fixing or remove to store yard/ credited to contractorcomplete all as specified and directed. |
| 13 | Taking up or down 250mm bore CI/DI pipes( including all fittings),with spigot and socket ends or flanged ends and lead joints including burning out joints,rubber joints from trenches/walls /floors including cleaning for re-fixing or remove to store yard/ credited to contractorcomplete all as specified and directed. |
| 14 | Supplying, laying jointing and testing 20 mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc complete all as specified and directed. |
| 15 | Supplying, laying, jointing and testing 25mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etccomplete all as specified and directed. |
| 16 | Supplying, laying, jointing and testing 40mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etccomplete all as specified and directed. |
| 17 | Supplying, laying, jointing and testing 50mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etccomplete all as specified and directed. |
| 18 | Supplying, laying, jointing and testing 80mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etccomplete all as specified and directed. |
| 19 | Supplying, laying, jointing and testing 100mm bore galvanised steel water tubing medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etccomplete all as specified and directed. |
| 20 | Supply, laying, jointing and testing of DI pipe 100mm bore with spigot and socket ends, centrifugaly cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 21 | Supply, laying, jointing and testing of DI pipe 150mm bore with spigot and socket ends, centrifugaly cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 22 | Supply, laying, jointing and testing of DI pipe 200mm bore with spigot and socket ends, centrifugaly cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 23 | Supply, laying, jointing and testing of DI pipe 250mm bore with spigot and socket ends, centrifugaly cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 24 | Supply, installation, connecting and testing sluice valve 100mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve all as specified and directed. |
| 25 | Supply, installation, connecting and testing sluice valve 150mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve all as specified and directed. |
| 26 | Supply, installation, connecting and testing sluice valve 200 mm bore cast iron bodyclass-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve all as specified and directed. |
| 27 | Supply, installation, connecting and testing sluice valve 250 mm bore cast iron bodyclass-PN-1.6 with flanged ends drilled pipes, ISI marked (IS:14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve all as specified and directed. |
| 28 | S&F cast iron air valve with two outlets both ends flanged and drilled,of size 100mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with stainless steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc,including taking out old un-serviceable complete all as specified and directed. |
| 29 | S&F cast iron air valve with two outlets both ends flanged and drilled,of size 150mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with stainless steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc,including taking out old un-serviceable complete all as specified and directed. |
| 30 | S&F in replacement 50mm bore gun metal, globe or gate valve, heavy duty confirming to IS-778with iron wheel head, screwed both ends for iron pipe including taking out old un-serviceable one complete all as specified and directed. |
| 31 | S&F in replacement 40mm bore gun metal, globe or gate valve, heavy duty confirming to IS-778with iron wheel head, screwed both ends for iron pipe including taking out old un-serviceable one complete all as specified and directed. |
| 32 | S&F in replacement 32mm bore gun metal, globe or gate valve, heavy duty confirming to IS-778with iron wheel head, screwed both ends for iron pipe complete including taking out old un-serviceable oneall as specified and directed. |
| 33 | S&F in replacement 25mm bore gun metal, globe or gate valve, heavy duty confirming to IS-778with iron wheel head, screwed both ends for iron pipe completeincluding taking out old un-serviceable one all as specified and directed. |
| 34 | S&F in replacement 20mm bore gun metal, globe or gate valve, heavy duty confirming to IS-778with iron wheel head, screwed both ends for iron pipe complete including taking out old un-serviceable one all as specified and directed. |
| 35 | M&L cutting of existing 200mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work, fittings, pipe etc shall be measured and paid saperately. |
| 36 | M&L cutting of existing 150mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work, fittings, pipe etc shall be measured and paid saperately. |
| 37 | M&Lrun lead joint for cast iron spigot and socket pipe (water main) and fittings for 100 mm bore including taking out old lead from jointscomplete all as specified & directed. Note:-Excavation and earth work shall be measured and paid saperately. |
| 38 | M&Lrun lead joint for cast iron spigot and socket pipe (water main) and fittings for 150 mm bore including taking out old lead from jointscomplete all as specified & directed. Note:-Excavation and earth work shall be measured and paid saperately. |
| 39 | M&Lrubber gasket joints (tyton joints) for CI/DI pipes of 100mm bore spigot and socket pipes including taking out old un-serviceable tyton jointcomplete all as specified & directed. Note:-Excation and earth work shall be measured and paid saperately. |
| 40 | M&Lrubber gasket joints (tyton joints) for CI/DI pipes of 150mm bore spigot and socket pipes including taking out old un-serviceable tyton jointcomplete all as specified & directed. Note:-Excavation and earth work shall be measured and paid saperately. |
| 41 | Dismantling of existing brick masonry valve pit 750x750x750mm including stacking serviceable material for credited to contractor and removal of unserviceable material from site complete all as specified and directed. |
| 42 | M&L construction of valve pit of inner sizes 750mm x 750mm x 750mm brick masonry construction complete with mild steel sheet cover 3.15 mm thick and angle iron frame of size 40 x 40 x 6mmduly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle all as specified and shown on drawing. All internal surface and external surface upto 15 cm below normal ground level of brick masonry shall be plastered 15mm thick in cement mortar 1:4, finish even and smooth including necessary excavation and earth work in any type of soil and PCC work all as per TD drg complete all as specified and directed. |
| 43 | M&L brick work with sub-class"B" bricks, straight or curved on plan exc 6m mean radious built in cement mortar 1:6 including demolition of old un-serviceable brick masonry complete all as specified and directed. |
| 44 | M&Lplain cement concrete 1:2:4 (nominal mix)using 20mm graded crushed stone aggregate as in foundation,filling and mass concrete complete all as specified and directed. |
| 45 | M&L 15mm thick cement plasterin cement mortar 1:4 on fair faces of brick works or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L for cleaning of sedimentation tank (45m x 25m x 2.5m- 02Nos)by taking out the mud,silt,sand and other particleand removing the waste material to a distance not less than 50m and spreading and levelling complete as directed including washing and scrubbing down of algae, scales, vegetation and shrubs from the inside of tank with wire brush, washing with lime mixed water including applying two coats of white wash inside of tank after preparation of surface, external surface of tank shall be painted with two coats of cement base paint including preparetion of old surfaces, provide a block of size 90cm x 60cm on external surface of wall with black synthetic enamel paint including writing capacity of tank, date of cleaning of tank, next due date of cleaning of tank with white paint complete all as specified and directed. |
| 47 | M&L cleaning of semi under-ground sump shed type clear water (supply tank) 52000 gallons capacityby taking out the mud, silt, sand and other particleand removing the waste material to a distance not less than 50m and spreading and levelling complete as directed including washing and scrubbing down of algae, scales, vegetation and shrubs from the inside of tank with wire brush, washing with lime mixed water including applying two coats of white wash inside of tank after preparation of surface, external surface of tank shall be painted with two coats of cement base paint including preparetion of old surfaces,provide a block of size 90cm x 60cm on external surface of wall with black synthetic enamel paint including writingcapacity of tank, date of cleaning of tank,next due date of cleaning of tank with white paintcomplete all as specified and directed. |
| 48 | Cleaning of semi under-ground sump clear water (supply tank) 100000 gallons capacityby taking out the mud,silt,sand and other particleand removing the waste material to a distance not less than 50m and spreading and levelling complete as directed including washing and scrubing down of algae,scales,vegetation and shrubs from the inside of tank with wire brush,washing with lime mixed water including applying two coats of white wash inside of tank after preparation of surface,external surface of tank shall be painted with two coats of cement base paint including preparetion of old surfaces,providea block of size 90x60cm on external surface of wall with black synthetic enamel paint including writecapacity of tank,date of cleaning of tank,next due date of cleaning of tank with white paintcomplete all as specified and directed. |
| 49 | M&L cleaning ofOHR clear water (supply tank) 100000 gallons capacity at 21m height stangingby taking out the mud, silt, sand and other particleand removing the waste material to a distance not less than 50m and spreading and levelling complete as directed including washing and scrubbing down of algae, scales, vegetation and shrubs from the inside of tank with wire brush, washing with lime mixed water including applying two coats of white wash inside of tank after preparation of surface, external surface of tank shall be painted with two coats of cement base paint including preparetion of old surfaces, provide a block of size 90cm x 60cm on external surface of wall with black synthetic enamel paint including writingcapacity of tank, date of cleaning of tank, next due date of cleaning of tank with white paintcomplete all as specified and directed. |
| 50 | M&L cleaning ofOHR clear water (supply tank) 10000 gallons capacity by taking out the mud,silt,sand and other particleand removing the waste material to a distance not less than 50m and spreading and levelling complete as directed including washing and scrubbing down of algae, scales, vegetation and shrubs from the inside of tank with wire brush, washing with lime mixed water including applying two coats of white wash inside of tank after preparation of surface,external surface of tank shall be painted with two coats of cement base paint including preparation of old surfaces,provide a block of size 90cm x 60cm on external surface of wall with black synthetic enamel paint including writingcapacity of tank, date of cleaning of tank,next due date of cleaning of tank with white paintcomplete all as specified and directed. |
| 51 | M&L cleaning ofmasonary over head tank clear water (supply tank) 3000 gallons capacityby taking out the mud, silt, sand and other particleand removing the waste material to a distance not less than 50m and spreading and levelling complete as directed including washing and scrubbing down of algae, scales, vegetation and shrubs from the inside of tank with wire brush, washing with lime mixed water including applying two coats of white wash inside of tank after preparation of surface,external surface of tank shall be painted with two coats of cement base paint including preparetion of old surfaces,provide a block of size 90cm x 60cm on external surface of wall with black synthetic enamel paint including writingcapacity of tank, date of cleaning of tank ,next due date of cleaning of tank with white paintcomplete all as specified and directed. |
| 52 | M&L cleaning away all grass, vegetation, saplings, shrubs, brushwood, under growth, roots, and trees not exceeding 30cm girth(measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed. |
| 53 | M&L painting on CI/DI pipe lines of any size in pump house area complete with two coats of synthetic enamel paint after preparation of surfaces complete all as specified and directed. |
| 54 | M&L repairing to centrifugal pump set of capacity 30 HP including taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, impeller, MS bush, nut & bolts as required for pump set including oiling, greasing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note: All other item required to change are paid as supply only in respective items. |
| 55 | M&Lrepairing to centrifugal pump set of capacity 12.5 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, impeller, MS bush, nut & bolts as required for pump set including oiling, greasing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note: All other item required to change are paid as supply only in respective items. |
| 56 | M&Lrepairing to monoblock pump set of capacity 7.50 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, MS bush, nut & bolts as required for pump set including oiling, greasing and gland packing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note: All other item required to change are paid as supply only in respective items. |
| 57 | M&L repairing to monoblock pump set of capacity 3.0/5.0 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, MS bush, nut & bolts as required for pump set including oiling, greasing and gland packing and re-installing pump & motor set and testing at site, complete all as specified and directed. Note: All other item required to change are paid as supply only in respective items. |
| 58 | Supply and fix wall mounting type panelwith automatic Star delta starter suitable for 22 KW motor of size 600mm (L) x 600mm (W) x 250mm (D) with overload relay of range 20-32 Amps, power contrctors of suitable capacity, timer rangeand single phase preventor, ON/OFF actuatorsetc with MCCB 100 Amp, 4 Pole, 25KA as main switch including taking down old un-serviceable panelcomplete all as specified and directed. |
| 59 | Supply and fix automatic Star delta starter for 12.5 HPmotor with overload relay of range 10-16 Amps, power contractors ML-1 and suitable capacity timer range , single phase preventerincluding taking down old un-serviceable star delta starter complete all as specified and directed. Make- BCH/L&T/Havells or equivalent as approved by GE. |
| 60 | S&Fmechanical joint suitable for 100mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 61 | S&F mechanical joint suitable for 150mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 62 | S&F mechanical joint suitable for 200mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 63 | Supply only PVC Star coupling of best quality suitable for 30 HP Induction motor shaft as per site including taking out old un-serviceable one complete all as specified and directed |
| 64 | Supply only stainless steel coupling of best quality suitable for 30 HP Inductor motor shaft as per siteincluding taking out old un-serviceable one complete all as specified and directed |
| 65 | Supply only bearing of best quality suitable for 30 HP inductor motor including taking out old un-serviceable one as per site complete all as specified and directed |
| 66 | Supply only bearing of best quality suitable for 12.50 HPmotor and pump as per site complete including taking out old un-serviceable one all as specified and directed |
| 67 | Supply only bearing of best quality suitable for 7.50 HPmotor and pump as per site including taking out old un-serviceable one complete all as specified and directed |
| 68 | S&F in replacement Lubricant oil of best quality suitble for Air blower as per site including taking out old un-serviceable oil complete all as specified and directed |
| 69 | S&F 80mm union for GI pipe including taking out old un-serviceable one complete all as specified and directed. |
| 70 | S&F 50mm union for GI pipe including taking out old un-serviceable one complete all as specified and directed. |
| 71 | S&F 25mm union for GIpipe including taking out old un-serviceable one complete all as specified and directed. |
| 72 | S&F 20mm union for GI pipe including taking out old un-serviceable one complete all as specified and directed. |
| 73 | S&F 20mm to 15mm Reducer Socket for GI pipe including taking out old un-serviceable one complete all as specified and directed. |
| 74 | S&F in replacement ball/float valve high pressure ofPTMT with epoxy coated alumunuium rod and high density plastic ball screwed for 15mm bore GI tubing complete all as specified and directed . |
| 75 | S&F in replacement ball/float valve high pressure ofPTMT with epoxy coated alumunuium rod and high density plastic ball screwed for 20mm bore GI tubing complete all as specified and directed . |
| 76 | S&F in replacement ball/float valve high pressure ofPTMT with epoxy coated alumunuium rod and high density plastic ball screwed for 25 mm bore GI tubing complete all as specified and directed . |
| 77 | S&F MS Cover made out of 3.0 mm thick sheet with angle iron frame (50x50x6mm) with Hook, Hold fast, Hinge etc. and painting it with one coat of black paint for valve chamber as per site including taking out old un-serviceable one for 90cmx90cmx90cm wall chamber as per site complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
