Renovation Of Directors Office At Nsut West Campus, Jaffarpur, Delhi-110073 ( Composite Work ) . Renovation Of Directors Office At Nsut West Campus, Jaffarpur, Delhi-110073 ( Composite Work ) .
Tender Value
15.48 Lakhs
Estimated cost
Bid Submission
17 Feb 2022
0 days left
EMD
30976
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Directors Office At Nsut West Campus, Jaffarpur, Delhi-110073 ( Composite Work ) . Renovation Of Directors Office At Nsut West Campus, Jaffarpur, Delhi-110073 ( Composite Work ) .
BOQ
| Sl. No. | Item Description |
| 1 | Part-A(Civil)1 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.1.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 2 | 2 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).2.1 12mm thick commercial ply conforming to IS : 1328 BWR type |
| 3 | 3 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.3.1 1.5 mm thick |
| 4 | 4 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 5 | 5 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :5A For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 6 | 5B For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 7 | 6 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Pre-laminated particle board with decorative lamination on both sides |
| 8 | 7 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar |
| 9 | 8 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 10 | 9 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm |
| 11 | 10 Supplying and Placing in position main table with overall size of table 1800 x 2100 x 750mm. The main table shall be of size 1800 x 900 x 750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product should be complete as per the direction of Engineer in charge. The product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. |
| 12 | 11Supplying & Placing in position Back Unit of dimensions 1800 x 500 x 1800mm. It shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm thick MDF one side pre laminate board with 0.4mm PVC membrane pressed on top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.The product should be complete as per the direction of Engineer in charge. The product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. |
| 13 | 12 Supplying & Placing High Back Chair as under:- The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The mechanism shall be Active BioSynchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt angle to the chair. Front-Pivot for tilt with feet resting on ground and continious lumber support should ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. The neckrest assembly consists of upholstered neckrest inner(material-poly propylene) with moulded polyurethane foam and polyster fabric. upholstered inner shall be fixed to neck rest cover. neckrest shall be fixed to back assembly through neckrest spline. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 109.3 to max 124.4 cm. Seat height - min 45.5cm to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. The product should be complete as per the direction of Engineer in charge. The product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. |
| 14 | 13 Supplying and Placing Position under Visitor Chair as under:- The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armtop is made up of PU molded over plastic inner. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99.0cm. Seat height -49.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. The product should be complete as per the direction of Engineer in charge. The product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. |
| 15 | 14 Supply and placing in position Sliding door storage with overall Dimensions of VSDU shall be 900mm(W) x 450mm (D) x 1830mm (H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - \"D\" Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise .VSDU shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 8 shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm .The product should be complete as per the direction of Engineer in charge. The product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. |
| 16 | 15 Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.The product should be complete as per the direction of Engineer in charge. The product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. |
| 17 | 16 Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The product should be complete as per the direction of Engineer in charge. The product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. |
| 18 | 17 Supplying and placing in position coffiee table of size 1310mm x 700mx 380mm Top: tempered glass, 1252mm x 652mm x 8mm Color: super white in beige painting body: mdf, color: grey-white high glossy, Legs: rubber wood, 700mm x 372mm x 85mm Color: walnut painting. The product should be complete as per the direction of Engineer in charge. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Delform, or Vitra only. |
| 19 | Part-B (Electrical1 Wiringforlightpoint/fanpoint/exhaustfanpoint/ callbellpoint with1.5 sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessedmediumclassPVCconduit,withmodular switch,modularplate,suitableGIboxandearthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.a) Group C |
| 20 | 2 Wiringforgroupcontrolled(looped)lightpoint/fan point/exhaustfan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.a) Group C |
| 21 | 3 Supply and fixing suitable sizeGI box with modular plateand coverinfrontonsurfaceorinrecess includingprovidingandfixing6pin,15/16Amps modular socket outlet and 15/16 Amps modular switch , connection etc . as required . |
| 22 | 4 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 23 | 5 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required. |
| 24 | 6 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 25 | b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 26 | c) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 27 | 7 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 28 | 8 Dismantling the existing worn out / defective fittings from the ceiling andSITC of minimum 36 watt aluminium body energy efficient LED Panel light fitting having system efficacy minimum 100 lumen/watt LM79, color temp 6500 deg K, recess mounting suitable for fitting in the 600mm x 600mm square existing space having symmetric glare free illumination in the false ceiling complete with all standard accessories including drivers etc. complete as required |
| 29 | 9 Supplying and fixing following way, single pole and neutral , sheet steel MCB DISTRIBUTION BOARD 240voltsonsurface/recesscompletewith,tinned copper bus bar, neutral link, earth bar, din bar, interconnections,powderpaintedincludingearthing etc. as required.(But without MCB/ RCCB/ Isolator)a) 12 way double door |
| 30 | 10 Supplyingandfixing5ampsto32amps,rating, 240/415volts,\"C\"Curve,miniaturecircuitbreaker suitableforinductiveloadoffollowingpolesinthe existing MCB DB complete with connections, testing and commissioning etc. as required.a) Single Pole |
| 31 | 11 Supplying and fixing folowing rating double pole 240 volts, MCBin the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 63 ampDP MCB |
| 32 | 12 Supplyingandfixingfollowingratingdoublepole 240volts, Residual current Circuit Breaker ( RCCB ) , having sensitivity of 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 63 amp DP RCCB |
| 33 | 13 Supplying, Installation, Testing and Commissioning of following sizes Heavy duty Exhaust Fan including connection with 3 core PVC insulated PVC sheathed flexible copper conductor cable on the existing window opening / Structure / Box complete etc. as required. The exhaust fan shall be fixed on minimum 10mm think backbite sheet having suitable opening for exhaust fan. All complete as per direction of Engineer-in-charge.a 300 mm 12\" 1400 RPM |
| 34 | 14 SITC of 2 Tr capacity Cassette air conditioner, 5 star rated Inverter type having only cooling facility suitable for operation of 215±10% volt, 50 HZ, A.C supplywith eco-friendly gas havingcordless remote control, fittings. Installationandcommissionofunitto becompleteinallrespectwithsatisfactionof engineer-in- charge. Completed with upto 3 mtr refrigerant pipeduly insulated withnitrile rubber tubular insulation between each set of indoor & outdoor units including making hole in the wall with the help of core cutter including repairing etc as per specification.(Note: The outdoor unit & indoor unit shall have copper coil for condenser and evaporator) |
| 35 | 15 Supplying, Installation and welding the copper pipe with the existing pipe of 2 TR refrigerant copper pipe work with fitting duly insulated with 19/13 mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specification all piping insidethe room shall be properly supported with M. S. hanger / angles / clamping arrangement, dash fasteners suitably run on existing cable tray etc. as required. |
| 36 | 16 SITC of 1/2.0TR AC Outdoor unit powder coated standrequired as per site condition wall / Floor Mounted. |
| 37 | 17 Supplying and Laying of one number 3/4 core 2.5 sqmm pvc insulated and pvc sheathed round wire on wall/surface/with pvc pipe etc for AC. |
| 38 | 18Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on walla 25 mm nominal outer dia Pipes |
| 39 | 19 Comprehensive Annual Maintenance of2 Tr capacity Inverter type Cassette AC as per manufacturer recommendation including servicing of the AC ,Refrigerant gas charging , replacement of compressor, motor,wiring,etc complete with all parts required for healthy and proper functioning of the Air Conditioning.(Nothing will be provided by the department during the period)a) For 1st Year (During defect liability period) |
| 40 | b) For 2nd Year |
| 41 | c) For 3rd Year |
| 42 | d) For 4th Year |
| 43 | e) For 5th Year |
| 44 | f) For 6th Year |
| 45 | 20 Scrap Value of worn out /defective conventional ceiling fan |
AI Tender Summary
Tender Timeline
Feb 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender