Military Engineer Services-MES has published Special Repair To Replacements Of Roof Asbestos Cement Sheet With Galvalume Sheet Of Bldg No T 2 T 3 Provn Of 06 Seat Toilet Bathroom For Single Jcos Accn Between Bldg No Bk 08 And Bk 09 Under Age B R No I Of Ge North Secunderabad Special Repair To Replac. Submission Date for this Tender is 11-03-2022. Shed Construction Tenders in Medchal Malkajgiri Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Feb-2022 | 8557 Corrigendum | Other | 04-03-2022 |
| 2 | 04-Mar-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-03-2022 |
| 3 | 07-Mar-2022 | 8557 Corrigendum2 | Other | 11-03-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 2 | Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc complete all as specified and as directed. |
| 3 | Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed. |
| 4 | Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed. |
| 5 | Dismantling timber Scantling framed work 40 sqcm and over in section, in any position complete all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 Sqm and not exc 4.00 sqm each complete all as specified and as directed |
| 8 | Demolition of Brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 9 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs, any thickness including cover fillets complete all as specified and as directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 11 | Material and labour forbrick work with fly ash bricks old size,straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed |
| 12 | Material and labour forbrick work with fly ash bricks old size,straight or curved on plan exceeding 6.0 metre mean radiusbuilt in cement mortar 1:6 complete all as specified and as directed |
| 13 | S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fiber cement building board fixed to frames etc complete all as specified andas directed. |
| 14 | S & F Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and as directed. |
| 15 | S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently as in rafter and purlin, without connection plates, etc. ( cut to ordinary lengths i.e within 20mmof the length indicated) to Fe-290-(Gde E- 165) complete all as specified and as directed. |
| 16 | S&F Rolled mild steel in Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk)forming holes, without any attachment etc.Roof trusses (framed) andconnecting plates, etc confirming Fe 410-W ( Gde-E-250) quality A,including necessary precautionary measures as in supports etc., complete all as specified and as directed. |
| 17 | S&FMS wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed. |
| 18 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 19 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges fixed with self tapping screws complete all as specified and as directed. |
| 20 | Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 21 | Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4without using extra cement complete all as specified and as directed |
| 22 | M&L for rendering 15 mm thick in two coats, 10 mm thick in cement plaster 1:6 and 5 mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed. |
| 23 | Supply only integral water proofing compound complete all as specified and as directed. |
| 24 | Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 25 | M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed. |
| 26 | M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed |
| 27 | M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed. |
| 28 | M&L for designer rubber moulded chequerred cement concrete tileswith mixture of greyand white cement in equal proportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layer in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed. |
| 29 | Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2020 complete all as specified and as directed |
| 30 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed |
| 31 | S&F 125 x 60 mmpressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 32 | S & F 35 mm thick factory made second class hardwood,plain framed paneled shutters (any number ofpanel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces. complete all as directed and specified. |
| 33 | S & F 30 mm 1st class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed. |
| 34 | S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed. |
| 35 | Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed. |
| 36 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as specified and as directed. |
| 37 | S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed. |
| 38 | M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe290 Gde E-165 complete all as specified and as directed. |
| 39 | Taking down steel/aluminium windows/ventilator/doors complete with frames and shutters (without taking off the shutters) of area not exc 2.00 sqm complete all as specified and as directed. |
| 40 | S&F standard aluminum sections of any type as in doors, windows, ventilators, partitions etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directed. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment.Cost of other consumables required for the item shall be deemed to be included in the quoted rate.However glass panes / Plywood sheet only will be measured and paid separately under respective items as supply only.Fixing by element of these items shall be deemed to be included in quoted rate. |
| 41 | Supply only 4.8 mm thicksheet glass, ordinaryquality, ineach pane for not exceeding 0.50 Sqm each pane for aluminium slidingwindows/ventilatorshutters etccomplete all as specified and directed. |
| 42 | Supply only 4.8 mm thicksheet glass, ordinaryquality, ineach pane forexceeding 0.50 Sqm each pane for aluminium slidingwindows/ventilatorshutters etccomplete all as specified and directed. |
| 43 | Supply only for 12mm thick Veneered decorative plywood,grade I (with BWR resin) decorative both side faces etccomplete all as specified. |
| 44 | S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia, complete all as specified and as directed. |
| 45 | S&F in repair bracket aluminium powder coated (fancy type) for 20 mm dia tubular curtain rod(for item above) complete all as specified and as directed |
| 46 | M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both sidedecorative face lamination fixed with screws, brackets to timber frame work with and including 1st class hard wood, 6 mm thick allaround edging, complete all as specified and directed. |
| 47 | Dismantling floor hearth or wall tilingincluding cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 48 | M&L for light shade double charged vitrified ceramic tiles approved shade 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match, laid over a screed bed 15mm thick in CM 1:4 (including), complete all as specified and directed. |
| 49 | All as per item no48 above but on vertical surfaces with backing coat of 10mm thick in cement mortar 1:4 complete all as specified and directed. |
| 50 | Material and labour for glazed ceramic high lighter wall tiles of approved colour of size 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 51 | Material and labour for Non skid coloured ceramic tiles of size exceeding 0.06 square metre but not exceeding 0.11 square metre of 7 to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including cement screed bed of cement mortar 1:4 of 15 mm thickcomplete all as specified and as directed. |
| 52 | Taking up or down steel Tubes, ‘medium grade’ galvanised, 15mm bore with all fitting and fixed complete to walls and ceilings or laid in floorsetccompleteall as specified and as directed. |
| 53 | S&FTubes, ‘medium grade’ galvanised, 15mm bore with all fitting and fixed complete to walls and ceilings or laid in floorsetccompleteall as specified and as directed. |
| 54 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed. |
| 55 | S&FTubes, ‘medium grade’ galvanised, 20mm bore with all fitting and fixed complete to walls and ceilings or laid in floorsetccompleteall as specified and as directed. |
| 56 | S&F in repairs CPbib tap 15mm bore fancy type with crutch or butterfly handle, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 57 | S&F in repairs stop valve / angle cockfancy type cast copper alloy chromium plated with capstan head screwed down for 15 mm dia iron pipe complete all as specified and as directed. |
| 58 | S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing ofstainless steel grating in round shape etc complete all as specified and as directed. |
| 59 | S & F in repairs PVC 10 ltrs capacity syphonic action type low level flushing cistern including flush pipe, cantilever brackets including taking down existing cistern etc complete all as specified and as directed. |
| 60 | S&F PVC connections, 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 61 | S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittingswith long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed. |
| 62 | S & F repairs 600mm x 450mm bevelled edge mirror of 5.5mm thick looking mirror selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 63 | Supply & fix in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including cement concrete and making good to floor complete all as specified and as directed. |
| 64 | M & L for preparing newly plastered wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer using chalk whiting etc complete all as specified and as directed. |
| 65 | M & L for complete removal of existing treatment ofwall and applying two coats of distemper oil emulsion on walls over 3mm thick wall care putty complete all as specified and directed. |
| 66 | Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of apexultima weather proofpaint over a coat of apex ultima primer including preparation of surface and complete all as specified and directed. Make : Apex from Asian Paints orequivalent in All Guard from Berger,Weather Shield Max Exterior Acrylic from ICI Dulux |
| 67 | M&L for Complete removal of existingtreatment on walls and applying 2 coats of apexultima weather proofpaint over a coat of apex ultima primer including preparation of surface and complete all as specified and directed. Make : Apex from Asian Paints orequivalent in All Guard from Berger,Weather Shield Max Exterior Acrylic from ICI Dulux |
| 68 | M&L for predation of new or previously untreated wooden surfaces of any description, over 10 cm in width or girth not otherwise describedand applying two coats of syntheticenamel paint including one coat of pink primer etc complete all as specified and directed. |
| 69 | M&L for preparation of old painted wooden surfaces of any description not other wise describedover 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 70 | M & L preparation of old painted surfaces of steeland applying one coat of synthetic enamel paint on steel surfaces over 10 cm width or girth complete all as specified and as directed.. |
| 71 | M&L for new or previously untreated steel surfacesof any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint)including priming with red oxide, zinc chrome complete all as specified and directed. |
| 72 | M & L for preparing the old plastered or unplastereddecorated surfaces of walls and applying two coats of white wash all as specified and as directed. |
| 73 | Removing/taking down of old bituminous tarfelt or any other type of roof treatment from roof/concrete surfaces and removal to a distance exc 250mtr and n. exc 500mtr from the site & cleaning of the roof surface with wire brush to make it free from dust, dirt complete all as specified and as directed. |
| 74 | Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule |
| 75 | Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square metre and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces with the over laps of 10 centimetres over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per square metre over that a coat of bituminous aluminium paint at the rate of 100 grams per square metre complete all as specified and as directed. |
| 76 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed |
| 77 | M&L formwork to sides & soffits of floor beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sub- ports, overhangs,etc also splays between colors and beams etc complete all as specified and as directed. |
| 78 | M&L for Reinforced cement concrete nominal mix type B1 1:2:4 (using 20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and as directed. |
| 79 | S&FTMT bars above 10 mm dia & over cut out length bent to shape including cranking, bending and binding with 0.9 mm dia mild steel wire or securing with clip complete all as specified and as directed. |
| 80 | S&FTMT bars 5 mm dia and over up to and including 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9 mm diamild steel wire or securing with clip for stirrups complete all as specified and as directed. |
| 81 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and as directed. |
| 82 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in Soft/Loose soil, complete all as specified and directed. |
| 83 | Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 84 | Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 85 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified and as directed. |
| 86 | M&L for RCC M-25 design mix as in foundations footings, plinth beams etc complete all as specified and as directed. |
| 87 | M&L for RCC M-25 design mix as in columns, pillars etc complete all as specified and as directed. |
| 88 | M&L for RCC M-25 design mix as in beams, lintels etc complete all as specified and as directed. |
| 89 | M&L for RCC M-25 design mix as in chajjas etc complete all as specified and as directed. |
| 90 | M&L for RCC M-25 design mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 91 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 92 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 93 | Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified and as directed. |
| 94 | Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and as directed. |
| 95 | M & L for Precast cement concrete block masonry with solid blocks exceeding 10cm in width and set in cement mortar1:6 by using solid blocks of type C1 1:3:6complete all as specified anddirected |
| 96 | M & L for hardcore of broken stone or boulders of gauge exc.63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed. |
| 97 | M&L Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed (or) bedding layer of mortar 15mm thick for laying floor finishes CM (1:4) complete all as specified and as directed. |
| 98 | M & L 75mm thick PCC 1:3:6 type C-2 (using 40mm aggregate) as in sub base, Floors, Paving,plinth protection, finished even and fair without using extra cement complete all as specified and as directed. |
| 99 | S&F 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 100 | S&F 125mm size aluminium handles, cast type, anodised complete all as specified and as directed. |
| 101 | S&F 100mm butt hinges extruded aluminium alloy with galvanised MS pin anodised type C22 complete all as specified and as directed. |
| 102 | S&F rotational moulded polythene water storage tank triple layer (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I Including dismantling of existing tank and removing to store complete all as specified and as directed.. |
| 103 | S & Fgun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and as directed.. |
| 104 | S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and as directed. |
| 105 | S&F MS Hold fast flat iron 25x3mm complete all as specified and as directed. |
| 106 | M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smoothwithout using extra cement with using water proofing compound as per manufacturer"s instructions complete all as specified and as directed. (Note: WPC shall be paid separately under relevant item of the schedule). |
| 107 | M & L for rendering 10mm thick in cement plaster 1:3 onconcrete surfaces as on ceiling complete all as specified and as directed.(Note: WPC paid separately). |
| 108 | M&L three coats of white wash including preparation of new surfaces as on ceiling complete all as specified and as directed. |
| 109 | Cutting chases, pinning in , for concealed water tubing on block walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and as directed.. |
| 110 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 25 mm bore GI tubing complete all as specified and as directed. |
| 111 | S&F 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 112 | S&F stop valve cast copper alloyscrewed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and as directed. |
| 113 | S & F PVC connection 15x450mm size complete all as specified and as directed.. |
| 114 | Supply and fix 10 Ltrs (PVC) white, valve less, syphonic action type, dual type flushing cistern, low level with inlet ball valve, float and top push button type, including long bend pipe complete all as specified and as directed. |
| 115 | M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 116 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trapincluding provn of lime concrete bedding including connections to "flushing cistern/pipe" complete all as specified and as directed. |
| 117 | S&F vitreous china, white wash hand basin, flat back size 550x400mm including MS brackets including cutting for and pinning in but excluding waste pipe complete all as specified and as directed. |
| 118 | S&F Soap dish vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 119 | S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges complete all as specified and as directed. |
| 120 | S&F15 mm dia brass chromium plated pillar tap, fancy type with or without lettered "Hot" or "Cold" ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and as directed. |
| 121 | M & L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigment over 30 mm hick sand cushioning complete all as specified and directed. |
| 122 | M&L for PCC 1:2:4 type B 1, using 40 mm graded stone aggregate as surface channels and drains including fair finishing complete all as specified and as directed. |
| 123 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia RCC pipe complete all as specified & directed. |
| 124 | M&L precast RCC 1:2:4 type B1 as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6 complete all as specified and as directed. |
| 125 | M & L rendering 15mm thick in cement mortar 1:6 on other than fair face of brick or concrete surface, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 126 | Cutting into existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 110 mm bore drain pipe complete all as specified and as directed.. |
| 127 | S&F LLDPE conventional septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc, complete for 30 users complete all as specified and as directed. |
| 128 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 25 cm thick, spread, leveled and rammed including watering complete all as specified and as directed. |
| 129 | M&L for Steel door of 1.25mm thick MS sheetincluding projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 130 | S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed |
| 131 | S&F 3mm thick figured glass pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 132 | M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation ofsurfaces complete all as specified and as directed. |
| 133 | M&L for three coats of white wash including preparation of new surfaces as on walls complete all as specified and as directed. |
| 134 | Supply and fixin repairs vitreous China wash down water closet pan (Pedestal Pattern), white colour with fixing bolts, plastic seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devise and making good the disturbed surfaces of floor to match with adjoining surfaces complete all as specified and as directed. |
| 135 | M & L for PCC 1:2:4 type B1 using 20 mm stone aggregated as in benching work etc complete all as specified and directed. |
| 136 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100 mm dia SWSW pipe complete all as specified & directed. |
| 137 | S&F 100mm internal dia of SGSW pipes (Grade "A")laid in trenches and jointed with cement mortar 1:3 complete all as specified and directed. |
| 138 | S&F 150mm internal dia of SGSW pipes(Grade "A") laid in trenches and jointed with cement mortar 1:3 complete all as specified and directed. |
| 139 | S&F 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or on the walls complete all as specified and as directed. |
| 140 | S&F 100mm SGSW, Y Junction, fixed with solvent cement, complete all as specified and directed. |
| 141 | S&F 150mm SGSW, Y Junction, fixed with solvent cement, complete all as specified and directed. |
| 142 | S&F 100mm SGSW bends any radius complete all as specified and directed. |
| 143 | S&F 150mm SGSW bends any radius complete all as specified and directed. |
| 144 | Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 m dia x 4.5 m effective depth as per drawing No TD/ST/748, Sheet No 1/1 dated 22 Jan 2011 and complete all as specified and as directed. |
| 145 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed. |
| 146 | M & L for Point wiring with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through existing conduit and including rigid 20 MM PVC conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with existing flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for one Light/Fan/Bell Point Controlled by One Switch complete all as specified and as directed.NOTE: 1. Modular Cover Plate is inclusive of the rated quoted by the contractor. 2. Cutting & Chases will be measured and paid separately. |
| 147 | All as per item No. 146 above but One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed. |
| 148 | All as per item No. 146 above but One 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 149 | All as per item No. 146 above but One 3 pin 5/6 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 150 | All as per item No. 146 here in before but using2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combinationpoint on independent boardincluding running of 2.5 Sq mm copper conductorFRLS PVC insulated cable as earth continuity conductor complete all as specified and as directed. |
| 151 | S & F SwitchMODULAR1 WAY6amps, 230 volts complete all as specified and as directed. |
| 152 | S & F MODULARsocket 5 pin 6amps2 MODULE230 Volts complete all as specified and as directed. |
| 153 | S & F MODULARsocket 6 pin 6 /16 amps2 MODULE230 Volts complete all as specified and as directed. |
| 154 | S & F electronic ceiling fan regulator MODULAR 5 stepped typeheavy duty suitable to work on 230 volts complete all as specified and as directed. |
| 155 | S & FSwitch MODULARone way 16 amps, 230 volts complete all as specified and as directed.. |
| 156 | S & F SwitchMODULARbell Push6amps, 230 volts complete all as specified and as directed. |
| 157 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed. |
| 158 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. |
| 159 | S & F Call bell AC 230 volts single phase complete all as specified and as directed. |
| 160 | Supply and fix wall mounted indus plus LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20Wincluding taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : C&S cat No - LTIC00120WLED/WD, Havells cat No-REGALBATTENT8UPTO1X22WSSBSWH incl Tube Rod cat No-PHOTONULTRAE2.01213T8SSTL20WLED8655PC, Wipro cat No WI0921208 including Tube Rod LL13-181-65SE. |
| 161 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable40 mm diaGI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and as directed. Make - Havells Cat No - ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC, C&S Cat No - LTESSI36WLED and Wipro. |
| 162 | S & Fsheet metal enclosure MCB DBSPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed. |
| 163 | S & F MCB SPN 240 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and directed. |
| 164 | S & F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB"scomplete all as specified and as directed. |
| 165 | Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanisediron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plateof SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate inpit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways,CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh complete. |
| 166 | M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduitsurfaceand conduit accessories of medium grade notless than 25 mm dia including one run of single core 4 sqmm PVC insulatedunsheated multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. |
| 167 | S & F in repair wall mounted decorative luminaire suitable forretrofit LED 10 watt including 1x10 watt LED bulb complete all as specified and as directed. Make - Havells Cat No LHDL07150099 or equivalent in Philips/Wipro/Bajaj |
| 168 | S & FRecess mounting indirect with perforated sheet & electronic DRIVERluminaire36 wattsLEDsoft line new with central opal diffuser series including all accessories and Lamp complete all as specified and as directed. Make :C&S Cat No LTCRSLM36WATT2"X2", Havells : ENDURASLIMPROPLUS2X2PLR36WLED840MOD or equivalent in Philips/Wipro/Bajaj |
| 169 | Supply and fix Heavy duty Exhaust fan, metal body, 300mm sweep, 1400 RPM 230 volts AC Supply with louvers including opening in wall and fixing arrangement with nut bolts and making good the disturbed surface all as specified and as directed. Make Havells Cat No- Turbo Force SP equivalent in Bajaj/CG. |
| 170 | Supply and fix in replacement of Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness including taking down old unserviceable fitting complete all as specified and as directed. Make: Havells RUGBYNEONFT10WLED860SSYMTOPC or equivalent to Bajaj/Wipro including taking down UNSV fitting complete all as specified and as directed. |
| 171 | Supply and fix wall mounted Indus plus LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & intergated electronic driver 1x10W, 230 Volts,DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. MAKE: Havells Cat No- LUMILINEPLUSBS10WLED865SPCSS, C&S Cat No - LTTB2F10WLED/W, Wipro Cat No - LL20-111-XXX-65NE3. |
| 172 | Supply laying or fixing or passing through pipe, 1100volts grade heavy duty cable with PVC insulated aluminium stranded served with inner sheathing of PVC tape and overall PVC insulated in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wireof size 16 sqmm two single core cable complete all as specified and directed. |
| 173 | Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI markedon concealed etc., with new sunk type pressed steel terminal boxes suitable forswitches duly painted with two coats of red oxide zinc chrome primer with suitable hylam sheet cover of suitable size for mounting of switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSconforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light point/Bell point controlled by one, one way switch 5 amps, SP |
| 174 | All as per item No. 173 above but One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed. |
| 175 | All as per item No. 173 above but One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.. |
| 176 | S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed. |
| 177 | Supply and fix in replacement socket combination 2 in 1, multipurpose 3/5 pin5 amps, flush type, 230 Volts complete all as specified and as directed. |
| 178 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 25 mm bore GI tubing complete all as specified and as directed. |
| 179 | Drilling and taping cast iron water mains for branch connections of internal dia 20mm complete all as specified and as directed. |
| 180 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in hard/dense soil, complete all as specified and as directed. |
| 181 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 Sqmm 4 core complete all as specified and as directed. |
| 182 | M&L for filling approved river sand in trenches for sand cushioning of laying of cables to the full width of excavated trench 8cm thick before laying the cable and 15cm above the cable, gently punned down, stretching and testing of cable on transformer yard etc complete all as specified and directed. Note: Thickness of sand cushion after punning down shall be measured for payment. |
| 183 | Supply and lay reinforced precast concrete cable cover LV, type I flat, size 250 x 150 x 40mm complete all as specified and directed. |
| 184 | Supply and lay galvanised iron tubing 40mm bore, light grade in protection of cable at road crossing/hard standing/pole protection fixed with MS clamps, nut bolts and washer as per site requirement complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
