Construction Of Disable Friendly Toilet ( Cwsn ) At Govt High School Dool Zone Nagseni District Kishtwar
Tender Value
2 Lakhs
Estimated cost
Bid Submission
17 Feb 2022
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jammu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Disable Friendly Toilet ( Cwsn ) At Govt High School Dool Zone Nagseni District Kishtwar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of (Crushed stone aggregates).(Including all carriages lead and lift if any) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-10(1:3:6) grade, with 20mm nominal size of Crushed stone aggregates,with 20% boulders..(Including all carriages lead and lift if any) |
| 4 | Providing and laying damp-proof course 50 mm thick withcement concrete 1:2:4 (1 cement : 2 course sand 4 graded stone aggregate 20mm nominal size Crushed Aggregates |
| 5 | Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar..(Including all carriages lead and lift if any) |
| 6 | Extra for brick work in superstructure above plinth level (by manual mean).(Including all carriages lead and lift if any). |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates..(Including all carriages lead and lift if any) |
| 8 | Reinforcement of R.c.c work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete. |
| 9 | Providing form work for slab base, beams and lintel band including strutting, propping and removal of form. |
| 10 | Providing form work for slab base, beams and lintel band including strutting, propping and removal of form.Suspended floors, roofs, landings, balconies and access platform |
| 11 | Centring and shuttermg including strutting, propping etc.and removal of form for·Edges of slabs and breaks in floors and walls. |
| 12 | Steel work welded in built up section/framed works including cutting,hoising,fixing in position and applying a primer coat of approved steel primer using structural steel primer as required for doors and windows frames. |
| 13 | Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,15 mm thick..(Including all carriages lead and lift if any) |
| 14 | Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,12mm thick..(Including all carriages lead and lift if any) |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.Second kail wood |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Float glass panes 4 mm thick glass panes |
| 17 | Applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 18 | Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. |
| 19 | White washing with lime to give an even shade with two or more coats for new work. |
| 20 | Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast,40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 21 | Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 22 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour suchas White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.(Including all carriages lead and lift if any) |
| 23 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. |
| 24 | Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 25 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unionsand G. I. clamps complete, including painting of fittings and bra |
| 26 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 27 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality andcolour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than190 gms. |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license |
| 29 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc (INTERNAL WORK-Exposed on wall(15 mm dia. nominal bore) medium |
| 30 | Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 20 mm dia. Gl pipe Medium) |
| 31 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 32 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighingnot less than 810 gms. 15 mm nominal bore |
| 33 | Providing and fixing C.P. brass angle valve for basin mixerand gyser points of approved make conforming to IS : 8931 (15 mm nominal bore) |
| 34 | Providing and fixingPVC waste pipe of sink or wash basinincluding PVC waste fitting complete. 32 mm dia |
| 35 | Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. |
| 36 | Providing and fixingPVC soil waste / rain water disposal pipe 100mm dia |
| 37 | Providing and fixingPVCBend 100 MM dia |
| 38 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railing and similar work including applying a priming coat of approved steel primer. G. I. pipes 40mm nominal bore (class B) |
| 39 | Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge |
| 40 | NOTE: - No Lead, Lifts, Transportation etc. will be provided |
AI Tender Summary
Tender Timeline
Feb 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender