}

Arc For Supply And Installation Steel Furniture Arc For Supply And Installation Steel Furniture , Computer Table , Computer Work Table-C Shaped Steel Frame Having Prelaminated Mdf Wooden Top, One Shelf And Stand For Cpu With Plastic Key Board Pullout T, aurangabad-Maharashtra

Dr. Babasaheb Ambedkar Marathwada University has published Arc For Supply And Installation Steel Furniture Arc For Supply And Installation Steel Furniture , Computer Table , Computer Work Table-C Shaped Steel Frame Having Prelaminated Mdf Wooden Top, One Shelf And Stand For Cpu With Plastic Key Board Pullout T. Submission Date for this Tender is 23-02-2022. Coats and Jackets Tenders in aurangabad Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

31023415
Arc For Supply And Installation Steel Furniture Arc For Supply And Installation Steel Furniture , Computer Table , Computer Work Table-C Shaped Steel Frame Having Prelaminated Mdf Wooden Top, One Shelf And Stand For Cpu With Plastic Key Board Pullout T
Tender
Indian
Maharashtra
Aurangabad
23-02-2022

Tender Details

Arc For Supply And Installation Steel Furniture Arc For Supply And Installation Steel Furniture , Computer Table , Computer Work Table-C Shaped Steel Frame Having Prelaminated Mdf Wooden Top, One Shelf And Stand For Cpu With Plastic Key Board Pullout Tray Size 750H X 900W X 590D Mm. , Computer Work Table- , Prelaminated Mdf Wooden Structure With Pullout Tray, Bottom Panel, Mounted On 4-Twin Wheels Castors Size- 750H X 800W X 430D Mm. , Computer Work Table- , Prelaminated Mdf Wooden With Lockable Key Board Pull Out Tray 3-Drawer Unit On One Side And 2-Open Ph Storage Units On Other Side Size 750H X 1200W X 600D Mm. , Computer Work Station- , Prelaminated Mdf Wooden Structure With Pullout Tray, One Each Drawer Shelf And Pigeon Hole Compartment Mounted On 4-Twin Wheels Castors Size- 750H X 1200W X 600Dmm , Conference Table , Conference Table Oval Shape Plb Top, With Pvc Lipping, Modesty Panel 2400 Mm. Wide And A Pair Of Tripod Type Legs For 8 Persons , Conference Table- , Oval Shape With Plb Top With Pvc Lipping, Modesty Panel And A Pair Of Tripod Type Legs , Size- 2567Mmw 894Mmd X 75Mmh , Multipurpose / Conference Tablerectangular Prelaminated Mdf Top On Steel Under Structure And 4 Round Steel Tubular Detachabel Legs For 6 Persons Size- 740H X 1655L X 900D Mm , Conference Table , Rectangular Square Half Circle Quarter Circle Modules With Wooden Top Made Of Plb With Lipping Horizontal Wire Management Carrier And 2 Tone Modesty Panel, To Form Configuration Of Your Requirement , Steel Table , Steel Table-25Mm Thick Prelaminated Mdf Top Round Tubular Frame One No. Each 3-Drawer And 2- Drawer Cum Cradle Storage Units Size- 750H X 1370W X 675D Mm. , Steel Table With Prelaminated Mdf Top Square Tubular Frame One No. Each 3-Drawer And 2-Drawer Storage Units Size- 750H X 1370W X 675D Mm , Steel Table With Prelaminated Mdf Mdf Top Square Tubular Frame Modesty Panel One No. Each 3-Drawer And 2-Drawer Storage Units Size- 750H X 1675W X 865D Mm. , Steel Table With Prelaminated Mdf Top Round Tubular Frame One No. 3- Drawer Storage Units Size- 750H X 1195W X 595D Mm. , Steel Table With Prelaminated Mdf Top Square Tubular Frame One No. 3-Drawer Storage Size- 750H X 1195W X 595D Mm. , Steel Table Made From 38 Mm Thick Medium Density Fiber ( Mdf ) Understructure Square Tube With Modesty Panel Of 18 Mm Thick Prelaminated Board Drawer Unit Made From Ms Sheet Consisting Of 2 Box Drawers Mounted On Roller Slide Size Lhs / Rhs 2691W X 1128D X 731Hmm , Steel Table , With 25Mm Thick White Cedar Or Grey Finished Prelaminatedwith2mm Thick Lipping Stiffener Mdf Top Steel Sheet Under Structure Modesty Panel And One Each Double Extension 3- Drawer And 2 Drawer Storage And Centre Tray Units Fitted With One Lock All Units Size: 725H X 1800W X 900D Mm , Steel Tablewith 25 Mm Thick White Cedar Or Grey Finished Prelaminatedwith2 Mm Thick Lipping Stiffener Mdf Top Steel Sheet Under Structure Modesty Panel And One Each Double Extension 3- Drawer And 2 Drawer Storage And Centre Tray Units Fitted With One Lock All Units Size: 725H X 1665W X 900D Mm , Steel Executive Table : , Made Of Pre-Laminated Board ( Plb ) 25Mm Thick ( Size : 1665W X 900D X 735H Mm ) Understructure :- Tubular Frame Desk Pedestal Should Be Combination Of Pre-Laminated Panels And Ms Sheet Of Size: 439 W X 729D X 536H And Slides Are Of Roller Slides Type With Storage Of Hinged Door Unit With Shelf Of Size: 341W X 438D X 793H, With Executive Return Unit Size: 900W X 483D X 670H Mm , Steel & Wood Executive Table ( Size- 1800W X 900D X 735 H Mm ) Made From Prelaminated Board With 25 Mm Thick Edges Are Duly Sealed With 2 Mm Thick Beadingwith 3-Drawers And 2-Drawers Unit On Either Side And A Modesty Panel In Front Andtubular Frame Made From Ms Square Tube With Executive Return Unit Size- 900W X 483D X 670H Mm , Steel Executive Table , With A Side Return Unit Having 3-Drawers Storage Unit And One 2 Drawers Moveable Pedestal. , Size:- 200W X 1190D X 750H Mm , High Back Chair , Premium Executive Chair , Ergonomically Designed Tension Adjustable Tilt Height, High Density Moulded P.U. Upholstered With Extra High Back And Seat Fitted With Antishock Height Adjusting Pneumatic Gas Lift. , Executive Chair With T-Shaped Armrests, Permanent Contact Mechanism P.U. Cushioned Back And Height Adjustable Seatfitted With Pneumatic Gas Lift With 5- Pronged Pedestal Fitted With Twin Castor Wheels. , Executive Revolving Chair , With Following Specifications High Back Chair With Seat & Backrest Are Made Up Of Molded Polyurethane Foam Of The Right Density And Thickness. Pneumatic Height Adjustment, Under Structure Made From Ms Powder Coated, Swivel Mechanism, Twin Wheel Castors. Size:- W75.0 X D75.0 X H100.0 Cm With Assembling, Installation Etc. As Per Manufacturers Standard Specifications. , Premium Executive Chair, , Ergonomically Designed Tension Adjustable Tilt Height, High Density Moulded P.U. Upholstered With High Back And Seat, Fitted With Antishock Height Adjusting Pneumatic Gas Lift. , Officers Revolving Chair , With Armrest Of Following Specifications Medium Back Chair With Seat & Backrest Are Made Up Of Molded Polyurethane Foam Of The Right Density And Thickness. Pneumatic Height Adjustment, Understructure Made From Ms Powder Coated, Swivel Mechanism, Twin Wheel Castors. Size: W65.0 X D65.0 X H84.0 96.5.0 Cm With Assembling, Installation Etc. As Per Manufacturer’S Standard Specifications. , Executive Revolving Chair , With Following Specifications High Back Chair With Seat & Backrest Are Made Up Of Molded Polyurethane Foam Of The Right Density And Thickness. Pneumatic Height Adjustment, Under Structure Made From Ms Powder Coated, Swivel Mechanism, Twin Wheel Castors. Size: W75.0Xd75.0Xh100.0 Cm With Assembling, Installation Etc. As Per Manufacturers Standard Specifications. , Midium Back Chair , Premium Executive Chair , Ergonomically Designed Tension Adjustable Tilt Height High Density Moulded P.U. Upholstered With Low Back And Seat, Fitted With Antishock Height Adjusting Pneumatic Gas Lift. , Officers Revolving Chair , With Following Specifications Medium Back Chair With Seat & Backrest Are Made Up Of Molded Polyurethane Foam Of The Right Density And Thickness. Pneumatic Height Adjustment, Under Structure Made From Ms Powder Coated, Swivel Mechanism, Twin Wheel Castors. Size: W75.0 X D75.0 X H97.0- 114.0 Cm With Assembling, Installation Etc. As Per Manufacturers Standard Specifications. , Executive Chair , Ergonomically Designed Height And Tilt Adjustable Seat, Angle Adjustable Medium Back, Medium Density Moulded P.U. Foam Upholstered Cushions. , Premium Work Chair , With Arms, Adjustable Molded P.U. Upholstered Back And Seat Mounted On Pneumatic Gas Lift, Fitted On 5- Pronged Base With Twin Castor Wheels. , Executive Chair Revolving And Tilting With Pvc Cane Back And Height Adjustable Seat On Hydraulic Spring Lift Mounted On 5- Prongs Steel Base Fitted With Twin-Castor Wheels , Visitors Chairs , Visitors Chair With Armrest Of Following Specifications Medium Back Chair With Seat & Backrest Are Made Up Of Molded Polyurethane Foam Of The Right Density And Thickness. Understructure Made From Ms Powder Coated S Type Round Tubular Frame. Size: W65.0 X D65.0 X H69.0Cm With Assembling, Installation Etc. As Per Manufacturer’S Standard Specifications. , Visitors Chair With Following Specifications Medium Back Chair With Seat & Backrest Are Made Up Of Molded Polyurethane Foam Of The Right Density And Thickness. Understructure Made From Ms Powder Coated S Type Round Tubular Frame. Size: W 55.0 X D 61.0 X H 80.0 Cm With Assembling, Installation Etc. As Per Manufacturer’S Standard Specifications. , Premium Executive Chair, , Ergonomically Designed Tension Adjustable Tilt Height Density Moulded P.U. Upholstered With Low Back And Seat, Fitted With Antishock Height Adjusting Pneumatic Gas Lift. , Visitor’S Chair With Polyurethane Arms, High Density P.U. Upholstered Seat And Back , Visitor’S Chair , ‘S’ Type With Steel Tubular Frame, Fabric Upholstered Medium Density P.U.F. Cushioned Seat And Back And Full Arm-Rests , Office Chair ‘S’ Type Steel Tubular Frame Bends Reinforced From Inside, Rexine Upholstered Padded Seat / Back, Full Arms Covered With Arm Rests. , Visitors Chairwith Following Specifications Medium Back Chair With Seat & Backrest Are Made Up Of Molded Polyurethane Foam Of The Right Density And Thickness. Under Structure Made From Ms Powder Coated With S Type. Size W75.0Xd75.0Xh90.0 Cm With Assembling, Installation Etc. As Per Manufacturers Standard Specifications. , Visitor’S Chair , Acrylic Type Moulded Chair With Removable Velvet Cushions, Lackers Glossy Finish, With Arms , Office Chairs ‘S’ Type , Steel Chair ‘S’ Type With Cane Seat And Back Without Arms , Steel Chair ‘S’ Type Cane Seat And Back With Half-Arms , Steel Chair ‘S’ Typecane Seat And Back With Full-Arms , Steel Office Chair ‘S’ Type , Steel Tubular Frame Bends Reinforced From Inside, Rexine Upholstered Padded Seat / Back, Full Arms Covered With Arm Rests. , Computer Chairs , Computer Chairwithout Arms, Revolving Cushioned Back And Height Adjustable Seat Mounted On 5- Pronged Base With Castor Wheels. , Computer Chairwith Arm Rests, Revolving Cushioned Back And Height Adjustable Seat Mounted On 5- Proged Base With Twin Wheel Castors. , Computer Chairpremium Revolving Work Chair, Without Arms With Tilt Height Adjustable High Density Molded P.U. Upholstered Back And Seat Mounted On Pneumatic Gas Lift, Fitted On 5- Pronged Base With Twin Castor Wheels , Steel Library Stack , Library Stack, Double Faced Main Section, With 14-Shelves Two End-Posts And Both End Enclosures , Library Stack Double Faced Additional Section With 14-Shelves One End Post And Without End Enclosure. , Library Stack, Single Faced Main Section With 7-Shelves With Two End Posts And Both End Enclosures. , Library Stack, Single Faced Additional Section, With 7-Shelves With Two End-Posts And Both End Enclosures. , Steel Book Case , 4-Door Bookcase Having 4-Compartments And Top Hung Glass Pan Shutters, Measuring :1675H X 840W X 380D Mm , 2-Door Bookcase Having 2-Compartments And Top Hung Glass Pan Shutters, Measuring 944H X 840W X 380D Mm , Steel Cupboards , Storwel Major Plain With 4-Adjustable Shelves. Measuring: 1980H X 915W X 485D Mm , Storwel Cupboard Kd Plain 22 Gauge, Knock Down Model With 4-Adjustable Shelves Size: 1830H X 900W X 450Dmm , Steel Cupboard Plain, 22 Gauge, With 4 Adjustable Shelves. Size:- 1950H X 900W X 507D Mm , Storwel With A Full Width Locker 2- Adjustable Shelves Size:- 1980H X 915W X 485D Mm , Storwel Cupboard Minor Plain With 3 Adjustable Shelve. Size: 1270H X 765W X 430D Mm , Steel Filing Cabinet , Filing Cabinet Four-Drawer With Automatic Locking System. Size: 470W X 620D X 1320H Mm , Filing Cabinet Two-Drawer With Automatic Locking System. Size:- 470W X 620D X 710H , Vertical Sliding Door , Vertical Sliding Door Unit For Record Storage With One Shelf And Metal Top Size:- 711H X 900W X 450D Mm , Vertical Sliding Door Unit For Record Storage With Two Shelf And Metal Top Size:- 1168H X 900W X 450D Mm , Seating Desk Bench , Class Room Furniture For 2-Students With Square Steel Tubular Under Structure Full Width Shelf For Book And Ndl Top Seat And Back Size:- 750H X 1048W X 895D Mm ( Overall ) , Class Room Furniture , Superior Quality For 2-Adulsts With Rectangular Channel Steel Under Structure Full-With Shelf With Front Panel Cover For Books And Rounded Cornered Ndl Top, Seat And Back Size: 750H X 1048W X 872D Mm ( Overall ) , Metal Perfo Chairs On Beam , Metal Perfo Chairs On Beam 3- Seater With Arm Rests As Per Manufactures Standard Specifications , Metal Perfo Chairs On Beam2- Seater With Arm Rests As Per Manufactures Standard Specifications , Metal Perfo Chairs On Beam 3-Seater Without Arm Rests As Per Manufactures Standard Specifications , Metal Perfo Chairs On Beam 2-Seater Without Arm Rests As Per Manufactures Standard Specifications , Dining Chair , Plastic Molded Chair With Following Specification Medium Back Made By Extreme Durable And Weather-Resistance Injection Moulded Plastic With Vibrant Finish And Understructure Made From Ms Powder Coated Round Tubular Frame.With Assembling, Installation Etc. As Per Manufacturer’S Standard Specifications. , Dining Table For Canteen The Tables Shall Be Of Stainless Steel Materials With Smooth Finished & Thick Sheet , 8 Chairs Table , 6 Chairs Table , 4 Chairs Table , Podium For Class Room , Made In 18 Mm Ply / Particle Board With Saniting Top, Standard Box Type. , Podiummade In Transparent Acrylic With Proper Joint Fixtures With Standard Asthetics. , M.S. Cots. Made In Heavy 25 Mm Squre Pipe Frame, With Ms 3 Inch C Section Patti, With Vertical, 2 Support With Powder Coating Size:- 900 X 1800 X 600 Weight Approx 35 Kg. , Steel Stool ( For Laboratory ) , Supplying Steel Stool ( For Laboratory ) With Height Adjustment Of 18” To 24” With Revolving Stainless Steel Top Having 4 Fixed Legs ( Heavy Duty ) , In Powder Coated M.S. Pipe Rod Size1” , In Stainless Steel Pipe Rod , Size 1” , Supplying & Steel Stool ( For Laboratory ) With Height Adjustment Of 18” X 24” With Revolving &Stainless Steel Top With Cushioned Back Rest Having 4 Fixed Legs ( Heavy Duty ) , In Powder Coated M.S. Pipe Rod Size 1” , In Stainless Steel Pipe Rod Size 1” , Optimizer Specification , Optimizer Drive Type- Optimizer Storage / Systemis An Efficient Space Saving Storage Arrangement Catering To A Variety Ofofficerequirements. ( A ) Construction; Right Knockdown Constructionmade Out Of 0.8 Thk. Crcasteel Conforming To Is; 513Gr.D., Each Body Block ( Ss / Sl / Tm ) Building Consists Of 1 Main Unit &Then Add-On Units ( 0, 1, 2, 3, 4-Depending On No. Of Bays 1, 2, 3, 4, & 5, ) . Each Unit Has 5 Loading Levels Formed By 4 Nos. Adjustable Shelves. Finish; The Bodies Including Shelves Are Given Antirust Surfacetreatment & Are Powder Coated With Epoxy Polyester Powder. A Centralized Locking Arrangement Isprovided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. The Recess Handle Lock & Placed At Suitable Height. This Arrangement Occupies A Space Of 90.0Mm. , Single Static Driver Cover Unit 2 Bay-Sd2 , Single Last Drive Cover Unit 2 Bay – Ld2 , Twin Mobile Drive Unit 2Bay- Td2 , Channels For Above Length 3’ 6’ 9’ &12’ , Single Static Drive Cover Unit 3Bay- Sd3 , Single Last Drive Unit 3 Bay – Ld3 , Twin Mobile Drive Unit 3 Bay- Td3 , Single Static Drive Cover Unit 4 Bay- Sd4 , Single Last Drive Unit 4 Bay – Ld4 , Twin Mobile Drive Unit 4 Bay- Td4 , Single Static Drive Cover Unit 5 Bay-Sd5 , Single Last Drive Unit 5 Bay –Ld5 , Twin Mobile Drive Unit 5 Bay- Td5 , Optimizer Push Pull Type 15’- , Optimizer Storage System Is An Efficient Space Saving Storage Arrangement Catering A Variety Of Office Requirements. ( A ) Construction; Knock Down Construction Made Out Of 0.8 Thk. Crca Steelconforming To Is: 513Gr. D, Each Body Block ( Ss / Sl / Tm ) Building Consists Of 1 Main Unit& Thenadd-On Units ( 0, 1, 2, 3, 4-Depending On No. Of Bays 1, 2, 3, 4&5 ) . Each Unit Has 5 Loading Levels Formed By 4 Nos. Adjustable Shelves. Finish: The Bodies Including Shelves Are Given Antirust Surface Treatment & Are Powder Coated Withepoxy Polyester Powder. A Centralized Locking Arrangement Is Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That Itgets Locked On Channels When All The Units Are Brought Together. The Recess Handle Lock Placed At Suitable Height. This Arrangement Occupies A Space Of 90.0Mm. , Single Static 1 Bay Push Pull Type –Ss1 , Single Last 1 Bay Push Type – Sl1 , Twin Mobile 1 Bay Push Pull Type– Tm 1 , Channels For Above Length 3’ 6’ 9’ & 12’ , Single Static 2 Bay Push Pull Type- Ss2 , Single Last 2 Bay Push Pull Type- Sl2 , Twin Mobile 2 Bay Push Pull Type- Tm2 , Shorted Angel Racks , Gi Cupboards Frame With Fittings , Sofa Set Executive Per Seat Hidesenti Foam & Juth Cloth & Rexin Cloth , Quotation For Modular Furniture , Staff Straight Workstation Made In 36Mm Postformedplywood Top With 2Mm Pvc Edgebanding.. Partition Framework Made In 60Mm Aluminium Powdercoating With Individual Raceways For Data And Elctrical Cabling With White Board And Soft Board , Full Height Partiton Made In Aluminium Powder Coated Framework Provided With 5Mm Glass For Framework And 9Mm Prelminated Board Provided With Godrej Door Closer And Locks , Medium / Full Height Storage Unit Made In 20Mm Plywood And 1.5Mm Lamination With 2Mm Pvc Edgebanding With Necessary Shelf And Modular Hardwares . , Reception Table Made In 25Mm Postformed Top And 20Mm Plywood And 1.5Mm Lamination For Gabel End And Modesty Panel With 2Mm Pvc Edgebanding . Provided With Three Drawer Pedestal Unit , Branch Head Table Finished In 1Mm Thk Laminate With 28Mm Thk Commercial Ply Top And 19Mm Vertical Supports And Apronall Finished With 1Mm Laminated In Approved Colour And All Edges Covered By 2Mm Thk Pvc Edgebandingtop Made In 28Mm Postlaminated Commercial Plywood With All Ebco Hardware With 2Nos Back Stoargeunit , Conferncetable Made In 25Mm Postlaminated Plywoodtop And 18Mm Postlmainted Plywood For Gabel End And Modesty Panel With 2Mm Pvc Edgebanding For 10 Persons. , Three Drawer Pedestal Unit Made In 18Mm Plywood With 1Mm Lamintion , Cpu Trolley

Key Value

Document Fees
INR 1000 /-
EMD
INR 10000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail