Renovation And Restrengthening Of Birni Rural Piped Water Supply Scheme Under Birni Block Of District Giridih For The Year Of 2021-22 Under D.W. S. Division Giridih 2 On Turnkey Basis Renovation And Restrengthening Of Birni Rural Piped Water Supply Scheme
Tender Value
2.82 Crore
Estimated cost
Bid Submission
22 Feb 2022
0 days left
EMD
28.27 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
birni → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation And Restrengthening Of Birni Rural Piped Water Supply Scheme Under Birni Block Of District Giridih For The Year Of 2021-22 Under D.W. S. Division Giridih 2 On Turnkey Basis Renovation And Restrengthening Of Birni Rural Piped Water Supply Scheme Under Birni Block Of District Giridih For The Year Of 2021-22 Under D.W. S. Division Giridih 2 On Turnkey Basis
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Feb-2022 | EMD CHANGAE | Fee | 22-Feb-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Infiltration Gallary |
| 2 | Earthwork in excavation foundation trenches as per design section in all kind of soil, including moorum soil, soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of the same beyond 50 m away from the toe of the dam in country side) within initial lead of 150 m and initial lift of 1.5 mAll lift as per specification & direction of E/I. |
| 3 | 1st Lift |
| 4 | 2nd Lift |
| 5 | Providing and fixing in position C.I. /M.S.350 mm dia rose pieces in intake wells including cost of all materials and labour, painting with three coats anti corrosiveoil paint, etc. complete as directed by Engineer-in-charge. |
| 6 | Dewatering the excavated trenches and pools of water in the building trenches /pipe line trenches well work by using pumps and other devices including disposing of water to safe distance …as per E/I |
| 7 | Design and supply applo v -wire screen laterials suitables for infiltration gallery….as per site condition and details . End connection suitable flange excluding taxcess and trasportation. (200 mm dia) |
| 8 | Providing Double Flange sluice valve conforming for IS -2906/14846 including worn gear arrangement as per Test pressure stainless steel spindal, caps transportation etc complete for rates inclusive all taxes….PN 1.6 without bypass arrangement.....as per E/I |
| 9 | 300 mm dia. |
| 10 | Supplying labour and tools for fixing C.I.Sluice Valvewith D.I. Spigottail piece including makingflange joints as per ISS specification including drilling holes in flanges if required cost of all ,jointing materials ,nuts and bolts but excluding the cost of pig leadand giving satishfactory hydraulic testing, etc complete as per specification and direction of E/I. |
| 11 | 300 mm dia. |
| 12 | Providing, lowering, laying and placing in position, shrouding material for screen pipe gallery / slotted pipe gallery/ trench gallery with all leads and liftsinvolved including transportation of materials to site of works, screening and washing of materials and placing in position with given section, etc. complete as directed by Engineer-in-charge |
| 13 | a ) 40 mm gauge pebbles |
| 14 | b ) 12 mm to 20 mm gauge pebbles |
| 15 | c ) 6 mm to 12 mm gauge pebbles |
| 16 | d ) Coarse Sand (from river sand) |
| 17 | Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loadinginto truck transport to stores, unloading etc. complete as directed by Engineer-in-charge. |
| 18 | 300 mm Dia. C.I. Pipes |
| 19 | Lowering, laying and jointing CI ‘B’ class connecting mains with rubber gaskets including transportation of pipes from stores to site of works, cost of jointing materials, cost of rubber gasket with all leads and lifts, etc. complete. |
| 20 | 300 mm Dia. C.I. Pipes |
| 21 | Providing and making flanged joints toflanged C.I. pipes of all classes /specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing, etc all complete as per specification & direction of E/I.. |
| 22 | xii) 300 mm |
| 23 | Providing & supplying ISI Standard CI flanged /S&S Special excluding GST levied by GOI & GOM in all respect including railway freight unloading from railway wagon loading into truck . Unloading ..etc complete |
| 24 | Providing P.C.C. M-150 in nominal mix of (1:2:4) for grouting & thrust blockwith approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M.2.5 to 3 including screening,shuttering, mixing cement concretein mixer and placinginposition, vibrating,striking, curing,taxes and royalty all complete as per building specification and direction ofE/I. |
| 25 | Thrust Block |
| 26 | Drilling in softrock of all kind by wagon drill machine for grout holes of more than 5 M depth ( Consolidation grouting ) all complete including washing of holes for period not exceeding 10 minutes per hole as per specification & direction of E/I. |
| 27 | Providing plane M.S /Tor steel reinforcement of 25 mmto 32 mm dia.rod foranchoring theas per approved design & drawing excluding carriage of M.S. rodsto work site, cutting, bending & binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 28 | Mechanical & Electrical Part Of WTP |
| 29 | Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under- |
| 30 | Providing,erecting and commissioning of Multi stage / HSC Centrifugal pump (make: Kirloskar / WPIL / Mather & Platt) as per IS :5120, capable for discharging - 15 LPS against a head of 28 m, consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:325 and IS:12615 , having 10% more BHP than that of pump, operating on 1500 rpm , 415V, 3PH, 50 HZ [make: Kirloskar / ABB / CGL / Marathon] all complete with reuired size of sluice valve and non-return valve standard fittings , strainers, reducers, foot valve, pressure gauge, MS delivery & Suction pipe , common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:- Contractor will have to check the design of pump & motor and get it approved by the Department) |
| 31 | Discharge- 15 LPS, Head- 28m and 15 HP (1W+1S) |
| 32 | Main Power Distribution Panel cum MCP for Clear Water to be installed at WTP:- Floor mounted cubical LT Motor Control Panel board fabricated with MS sheet of suitable gauge and size, dust and vermin proof and painted consisting of proper power distribution 4 pole 2000A copper busbar, 1 no. incoming feeder of 2000A ACB, 6 nos. 630 A MCCB for outgoing feeder of Clear water pump sets (with spare feeder), 2 nos. 100 A & 63 A MCCB for WTP, & other Utilities, 2 nos. 32 A MCB for lighting feeder, switch disconnected isolater (TPN) , selector switches, Volt-meters, Ampere-meters, indicator lamps etc. all complete with internal wiring, protection Units/relays and capacitor banks of proper KVAR for Power Factor. Improvement for Pump sets and other equipments, etc. all complete as per site requirement, Instruction of E/I. |
| 33 | Power wiring with required 400 Sq mm 3.5 core 1.1 kv grade armoured Aluminium Cables, XLPE / PVC insulated armoured cable from Transformer to MCP at Clear water Pump House.Laying, Jointing and making proper terminations, etc all complete. |
| 34 | Power wiring with required 95 Sq mm 3.0 core 1.1 kv grade armoured Aluminium Cables, XLPE / PVC insulated armoured cable from Transformer to MCP at Clear water Pump House.Laying, Jointing and making proper terminations, etc all complete. |
| 35 | Supplying, Installation & Commissioning of Lightening arrestor for Pump house, fire fighting system, first aid, Rubber matting etc. for WTP. |
| 36 | Lighting: Doing internal and external lighting by doing wiring and installing luminaries with standard lumen in pump house,gangway and electric substation of Raw Water pumping plant. including 2 nos. Fire estingusher, first aid box, tools & plants, insulation globs & shoes, etc. all complete as per site requirement and direction of E/I. |
| 37 | Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/I. |
| 38 | Installation Charges |
| 39 | Raw Water Pumping Machinery |
| 40 | Supply, installation, testing and commissioning of Raw water pump sets with following equipments and details as under |
| 41 | Vertical Turbine Pump -:[make: Kirloskar/Jyoti/ WPIL/ Mather & Platt], single/ multi stage, Radial/ Mixed flow, capable of discharging 16 LPS against a head of 45 m consisting of bowl assembly dynamically balanced bronze impellers, stainless steel pump shaft and line shaft of 60 ft flanged column assembllies of 1.5m length and with 9mm thick MS fabricated column assembly with strainers, prelubrication tank, Non reverse ratchet coupling, pressure gauge, required size of sluice valve and non- return valve & all accessories .coupled with squirrel cage induction motor Eff1 rating havingconforming IS:325 and IS:12615 having 15% more BHP than that of pump, operating on 3 Phase, 415V, 50Hz with 1440 rpm [make: Kirloskar/ BHEL/ Crompton Greaves/ABB].Including cost of construction foundation, bolt & nut, common header, with all suction/delivery piping works, required for the job, etc. all complete job. (Note - Contractor will again have to check the design of Pump & Motor and get it approved by the Dept.) |
| 42 | Discharge- 16 LPS and Head- 45m (1W+1S) |
| 43 | Motor Control Panel:Supplying, installation, testing &commissioning of Floor mounted cubical LT Motor Control Panel board operated on 3 phase, 50 Hz, 415V+/- 10% AC supply, fabricated with MS sheet of suitable guage and size,dust and vermin proof consisting of proper power distribution 4 pole 200A copper busbar, 2 no. incoming feeder with spareof160A MCCB, 2 nos. outgoing feeder of 100A MCCB for pumps sets, 1 no. 100A MCCB outgoing Spare feeder, 2 no. 32A& 2 no. 63A MCB feeder for lighting, other electrical utilities and spare, ELCB/RCCB,switch disconnected isolator (TPN) rated (100A - 415V), selector switches, Volt-meters, Ampere-meters, CT/PT units, indicator lamps etc. all complete with internal wiring, meters, protection units/relays & control cables. Panel board shall be duly painted with two coats of super enameled paint of approved colour with one coat of red oxide primer according to Indian standards and instruction of E/I. etc. all complete. [MCCB/ MCB make: L&T/ Siemens/ Schneider/ ABB/ C&S) |
| 44 | Cable: Power wiring with required 120 Sq mm 3.5 core1.1KV grade unarmoured Copper cablesXLPE/PVC insulated cable from Panel (MCP) to Motors & Staters including laying on wall or on floor as where required, jointing and making proper terminations,etc. all complete. |
| 45 | Cable: Power wiring with required 25 Sq mm 3 core1.1KV grade unarmoured Copper cablesXLPE/PVC insulated cable from Panel (MCP) to Motors & Staters including laying on wall or on floor as where required, jointing and making proper terminations,etc. all complete. |
| 46 | Earthing: Earthing with copper earth plate including accessories and providing masanory enclosure with cover plate having locking arrangement and watering pipe of 2.7 m long etc. with charcoal / coke and salt as required conforming IS:3043 for each motors. |
| 47 | Lightening Arrester: installatiom of lighteingArrester over pump house and electric sub station for raw water pumping plants as per EI rule. |
| 48 | Crane: Providing, erecting triple spur gear type ChainPulley Block suitable for 3 Tonne capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark, etc. all complete job as per site requirement. |
| 49 | Lighting: doing internal and external lighting by doing wiring and instoling lumenaries e.g suitable wattage LED, light fittings with standard lumane in pump house, Gangway etc all complete for Raw water plant. |
| 50 | Supply, installation and commissiionng of 63 KVA, 11/0.433 KV copper would distribution transformer for Raw water Pumping Plant at intake well. |
| 51 | Providing, erecting and commissioning of DP structure in Rail/RSJ Pole with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse and lightening arrester, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material labours, cost of providing disc & pin insulator for HV and LV side of the transformer, testing of dielectric strength of transformer oil etc. for transmission of power. All complete job as per I.E. rules and specification of Jharkhand state electricity board. |
| 52 | Installation Charges |
| 53 | Distribution Main |
| 54 | Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main |
| 55 | Providing and supplying ISI mark centrifugally cast (spun) ductile Iron pipes of 100 mm and above all diameter for water works with sockets and spigot ends confirming to IS 8329/2000 in standared working lengths of 4.5,5.5,and 6.0 M for classification K-7 and K-9 suitable for push on joints (rubber gasket D jointing) with cement mortar lining inside the pipes with outsides zinc and bituminious coating rate are ex- factory excluding transportation,taxes and duties contractor profit and over head charges etc. |
| 56 | 100mm dia. DI K-7 |
| 57 | 110mm dia. HDPE K-7 |
| 58 | 150mm dia. DI K-7 |
| 59 | 200mm dia. DI K-7 |
| 60 | Carriage of pipe upto 250 km. lead |
| 61 | 100mm dia. DI K-7 |
| 62 | 110mm dia. HDPE K-7 |
| 63 | 150mm dia. DI K-7 |
| 64 | 200mm dia. DI K-7 |
| 65 | Providing and supplying D.I. specials and fitting withsealing rubber gasket of SBR complete withcast iron follower gland and MS nutbolt coated or otherwise protected from rusting and suitable for DI pipes includingcost of labour, materials, and transportation to stores/ site, loading and unloading including all taxes etc. complete as per IS-9523.. |
| 66 | Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrengements as per test pressure stainless steel spindle, caps includingall taxes transportation complete |
| 67 | 100 mm dia. |
| 68 | 150 mm dia. |
| 69 | 200 mm dia. |
| 70 | Earthwork in excavation (as per I.S. 3114/1965 forlaying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipes with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge. |
| 71 | Earthwork in excavation of cut-off trenches by the hydraulic excavator as per designed section in soft rock (Where blasting is not needed) (vide type of soil item -C) with disposal of soil beyond 500m from centre of trench but upto 1 km with all lifts by tipper including construction and maintenanceof haul road all complete as per specification & direction of E/I . |
| 72 | Lowering, laying and jointing with SBR rubber gaskets DI pipes of various classes with CI/MS specials of following diameter in proper position, grade and alignment as directed by Engineer in Charge including conveyance of material from store to site of work including cost of jointing materials and rubber rings, labouretc. complete |
| 73 | 100mm dia. DI K-7 |
| 74 | 110mm dia. HDPE K-7 |
| 75 | 150mm dia. DI K-7 |
| 76 | 200mm dia. DI K-7 |
| 77 | Supplying labours, tools and tackles for testing of laidCI or HDPE pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently) |
| 78 | 100mm dia. DI K-7 |
| 79 | 110mm dia. HDPE K-7 |
| 80 | 150mm dia. DI K-7 |
| 81 | 200mm dia. DI K-7 |
| 82 | Supplying labour and tools for fixing C.I. sluice valvein trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I. |
| 83 | 100mm dia. DI K-7 |
| 84 | 150mm dia. DI K-7 |
| 85 | 200mm dia. DI K-7 |
| 86 | Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M.x 0.90M. x 1.50M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. gradedstone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I. |
| 87 | Cutting the road as well as restoring the same as perspecifications and as directed by Engineer-in-charge |
| 88 | Waterbound Macadam road(taken out material will be used) for cutting as per requirement 50% of the restoring work |
| 89 | Dismantaling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of unservisible materials with all leads complete as per direction of E/I |
| 90 | Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of store chips 20 mm-6 mm size graded and clean coarsed sand of FM 2.5 to 3.0 including screeing shuttering mixing cement concrete in mixer and placing in position vibrating striking curing taxes and royalty alll complete as per building specification and directio of E/I |
| 91 | Earthwork in backfilling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-charge( Refilling ) |
| 92 | House Connections |
| 93 | Earth work in excavation ( as per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give 1 m av. cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/l. (For soil item B) |
| 94 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including\" cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 95 | ProvindingP.C.C M-150 with in norminal mix of (1:2:4) in foundation with approvedquality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including , screening , shuttering, mixingcement concrete in mixture and placing in position vibrating striking curing taxes and royality all complete as per building specifiaction and direction of E/I |
| 96 | Earth work in back filling the trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B) |
| 97 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 98 | Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN etc. for usage in drinking water with quality system. The cost shall including cost all taxes, inspection charges transprotaion to work site and earth work involved , all complete job as per specification and direction of E/I. 20 mm dia pipe. |
| 99 | Providing and supplying G.I. pipes (Tata and equivalent make) for usage in drinking water with quality system, The cost shall include testing of all materials all taxes central , State , Municipal, Inspection charges transportation up to site transite insurance, loading, unloading, stacking etc. complete as specified and directed. |
| 100 | Lowering laying and jointing HDPE / MDPE pipe in proper position including all specials by Compression fitting / Electrofusion and But fusion jointing procedure including hydraulic testing as er relevent IS Code complete with all materials for jointing procedure like Electrofusion machine ,Electric mirrior/heater/But fusion welding machine with hydraulic testing and all labours as directed by engineer in charge as per IS-7634 part II |
| 101 | Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/l. (Pipe with socket to be supplied deparmentally free of cost). |
| 102 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram |
| 103 | Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/ (a) 20 mm dia and weight not less than400 gram. |
| 104 | Providing and fixing 15 mm Dia male ended C.I Body Brass Spindle valve and seat bib cock of approved quality (Wt.not Less than 400 gms.) with extra socket all complete as per specification and Direction of E/I. |
| 105 | Supplying and fixing G.I. fittings of Approved make all complete as per specification and Direction of E/I |
| 106 | Elbow 20 mm |
| 107 | Elbow 15 mm |
| 108 | Reducing Socket 20 mm |
| 109 | Nipple 20 mm |
| 110 | Nipple 15 mm |
| 111 | Union Socket 20 mm |
| 112 | Socket 15mm |
| 113 | Socket 20 mm |
| 114 | 12% GST |
| 115 | Labour cess |
AI Tender Summary
Tender Timeline
Feb 21, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 22, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender