Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #31014363

Repairs To Joinery Roof Sheet Tiling Repairs To Joinery Roof Sheet Tiling Ceiling Plastering And Other Misc Br Work In Tarapore Vihar Vikram Batra Vihar 13 Engr Regt And Csr Under Age Br-Ii Of Ge Sukna

Issued by Statutory Bodies & Commissions/Committees · sukna, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Mar 2022
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sukna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repairs To Joinery Roof Sheet Tiling Repairs To Joinery Roof Sheet Tiling Ceiling Plastering And Other Misc Br Work In Tarapore Vihar Vikram Batra Vihar 13 Engr Regt And Csr Under Age Br-Ii Of Ge Sukna

BOQ

Name of Work : REPAIR / REPLACEMENT / CONVERSION OF OH ACSR LINE INTO UG CABLE AND CONNECTED LT DISTRIBUTION WORKS AT BANA SINGH VIHAR, OLD DHAN SINGH THAPA VIHAR ETC AT SUKNA MIL STN
Sl. No. Item Description
1S&F in repairs steel rolling shutters of 1.25 mm thick lath, without ball bearing and including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push & pull or manual type complete all as specified and as dirrected.Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Steel Engineers / Sen-Harvic
2Taking down steel rolling shutters of any description and of any size and refixing the same after carrying out repairs, oiling and greasing and including replacing with new guide channels and weldings etc. complete all as specified and directed.Note: Rates for spare parts like bearing, tension spring / gear operated lever and shaft are included in the quoted rates.
3M&L making good broken / damaged RCC chajjas with PCC 1:2:4 type B1 or cement mortar 1:3 and including rendering 15 mm thick in CM 1:4 mixed with water proofing compound as per manufacturer\"s instruction to top, sides and soffits, including necessary scaffolding, formwork upto 3 storey height complete all as specified and directed.Note:- Water proofing compound shall be measured and paid seperately
4M&L brick work withsub class\"B\" brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.
5M&L 10 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement and including taking down complete all as specified and directed.
6M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and including taking down complete all as specified and directed.
7M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement and including taking down complete all as specified and directed.Note:- WPC shall be measured and paid separately.
8Supplyonly liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited / M/s IWL Limited
9M&L preparation of new plastered ceiling surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya
10M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper overa coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish completeall as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints
11M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints /Asian Paints (Gutucam) / Crimocem Super Cement paints
12M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed.Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)
13M&L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)
14M&L machine cut kota stone flooring 20 mm (minimum) thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing and laid over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
15M&L 16-18 mm thick granite (of any type) tiles machine cut, bedded over & including 20 mm thick screed bed in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and demolition complete all as specified and directed.
16M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over andincluding screed bed 15 mm thick in CM 1:4 complete all as specified and directed.Make:-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
17All as per Sl item No. 16 abovebutin skirting / dado etc. laid over andincluding screed bed 10 mm thick in CM 1:3.
18M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thickas in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :-M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd
19M&L PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
20Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.
21Dismantling of overhead aluminium conductor, steel reinforced (ACSR) or AAC conductors complete all as specified and directed.
22Dismantling of cross arms of MS channel or angle sections, bracings, supports, clamps and back plates including nuts, bolts, washers etc. complete all as specified and directed.
23Dismantling insulators from poles of any type & any sizecomplete all as specified and directed.
24Taking down existing XLPE Cable of any size inunderground / alongwith pole or in any positon, removing materials to store for keeping in safe custody or for taking credit complete all as specified and as directed.Note:- Excavation and earthwork (if required) shall be measured and paid seperately.
25Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 10 Sqmm x 4 Core, laid in trenches / duct / on pole complete all as specified and directed.Make :- Havells / KEI / Polycab
26All as per Sl. Item No. 25 above but 16 sqmm x 4 Core
27All as per Sl item No. 25 above but 35 sqmm x 3.5 core.
28All as per Sl. Item No. 25 above but95 Sqmm x 3.5 Core
29All as per Sl item No. 25 above but 150 Sqmm x 3.5 Core.
30Re-routing / re-laying of servicible LT UG cable intrenches with necessary connection and disconnection for re-distribution of loadcomplete in all respects as specified and directed.Note:- Excavation, returning filling, removing, sand, bricks willbe measured and paid seperately under relevent items of this schedule.
31Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.
32Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
33Removing of excavated surplus soil to a distance n. exc 50 m and depositing wheredirected at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
34M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.
35Supply & laying sub class \"B\" bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.
36S&F 15 mm bore galvanised steel tubing, light grade with necessary fittings fixed along electric pole etc, for cable protection including taking down complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd
37S&F 40 mm bore galvanised steel tubing, light grade with necessary fittings, fixed along electric pole etc, for cable protection including taking down complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd
38S&F 80 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing, for cable protection including taking down complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd
39Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 80 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed.Note:- GI Pipe shall be measured and paid separately.
40S&F street light junction box made from CPRI approved factory having size 200 (Width) x 150 (Depth) x 250 (Height) mm (minimum dimensions) made out of 2.00 mm thick CRCA sheet, duly powder coated of approved shade over a coat of red oxide primer both internally and externally, with rain shed all side except back side, comprising of 04 nos copper bus-bar of size 20 x 4 mm mounted on suitable size spacer insulators, necessary cable entry / exit holes for upto 35 sqmm cables, nut-bolts, MS clamps of suitable size for fixing including dismantling complete all as specified & as directed.
41S&F in repairs 6 KW, single phase, automatic street light control panel with and including digital timer switch for automatic switching on / off street light as per set time through programmable 24 hour switch, 32A, TP power contactor, 40A SPN MCB, wall / floor mountable, IP 54 (dust and vermin proof) enclosure made out of CRCA sheet duly powder coated, conforming to IS/IEC 60954-4-1, in-built- short circuit protection, locking arrangement with padlock and panel lock complete all as specified and directed.Make:- Havells / GE / Kakatiya energy system Pvt Ltd
42S&F FRLS PVC insulated 3 core multistranded sheathed cable with 1.5 Sqmm copper conductor for connection of street / security light etc, including taking down complete all as specified and directed.Make:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL
43S&F LED street / security light fitting 1 x 60 watt, IP-65 (minimum), integrated typewith high efficiency electronic driver, pressure die cast aluminium housing with toughened glass cover, internally prewired and including electrically connecting with twin core twisting flexible cord of 0.75 sqmm copper conductor cable including all other necessary fixing accessories such as GI pipe light grade of 40 mm bore (or higher size as per manufacturer recommendation) & suitable length with MS flat iron clamps (clamps shall be 40 x 5 mm MS flat), nuts, bolts & washers including painting to GI pipe & clamps with two coat of aluminium paint over a coat of red oxide primer & taking down complete all as directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells
44S&F LED street / security light fitting 1 x 90 watt, IP-65 (minimum), integrated typewith high efficiency electronic driver, pressure die cast aluminium housing with toughened glass cover internally prewired and including electrically connecting with twin core twisting flexible cord of 0.75 sqmm copper conductor cable and all other necessary fixing accessories such as GI pipe light grade of 40 mm bore (or higher size as per manufacturer recommendation) & suitable length with MS flat iron clamps (clamps shall be 40 x 5 mm MS flat), nuts, bolts & washers including painting to GI pipe & clamps with two coat of aluminium paint over a coat of red oxide primer & taking down complete all as directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells
45S&F 100 watt LED flood light fitting, IP-66 (minimum), IK-07 with luminous efficacy 120 Lumen/watt (minimum), 10 KV Surge Voltage protection, operating voltage 140V - 270V, pressure die cast aluminium housing, internally prewired and including electrically connecting & all other necessary fixing accessories such as 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers including painting to clamps with two coat of aluminium paint over a coat of red oxide primer & taking down complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells
46M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point including dismantling complete all as specified and directed.Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
47S&F cubical type LT panel board, outdoor type, factory made from CPRI approved factory, having overall minimum dimensions 0.75 m (Length) X 0.9 m (Height) X 0.50 m (Depth), made out of 3.15 mm thick CRCA steel sheet pretreated, powder coated and including MS angle iron 50 x 50 x 5 mm frame work, general construction conforming to IS-13947, legs 0.6 m long, MC 100 channel base, totally enclosed, dust & vermin proof using neoprene rubber gasket (IP-55), double leaf door shutter in front side and single leaf shutter in rear side fixed with hinges having necessary locking arrangement in both front and rear door, with four side projected slanting roof, provided with louvers for ventilation / heat dissipation, duly powder coated of approved shade over a coat of red oxide primer both internally and externally and including mounting on PCC platform made out of PCC 1:3:6, type C-2, 150 mm thick (100 mm below & 50 mm above GL) all round the panel board and including necessary earth work.(Item Contd...)
48The panel board shall be suitable for operation on AC 415 / 440 Volt, 3 Phase, 50 Hz, 4 wire system and shall have 04 nos tinned Aluminium bus bar conductor of size 25 x 6 mm of 350 Amps capacity with colour insulating tape / sleeves mounted on suitable size \"F\" class, non hygroscopic, non combustible insulators, provision for fixing ACB / MCCBs / MCBs, necessary inter-connections with bus bar / strip with 1100V grade standard colour code insulation, provision of cable entry / exit provided in bottom, connections of all outgoing / incoming, existing / new copper wires of required size (minimum 2.5 sqmm) with following accessories and including taking down of old panel complete all as specified and directed:-Incoming :-(i) MCCB 4 pole 250 Amp, 25KA, Ics = 100% Icu including spreader link- 01 No.Instrumentation System :-(i) Phase indicator LED lamps (R, Y & B) with integral circuit (set of three) - 01 Set(ii) Danger notice plate of size 20 x15 cm & 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size for LT conforming to IS - 2511 - 02 NosMake of MCB/MCCB :- L&T / Havells (Brand- HIM & HIX) / Panasonic/ Hager / ABB / Legrand / Indo AsianMake of Indicator Lamps :-L&T / Siemens / GE / RR Micro / BCH / Schneider
49M&L for roof treatment in order of precedence as given below complete all as specified and as directed:-(i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm.(ii) 15 mm thick screed bed in CM 1:4 on surface.(iii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm.(Contd...)
50(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing.(v) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer\"s instruction.Note :- (a) Bituminous primer shall be \"ShaliTex Primer\" manufactured by M/s STP Ltd or equivalent in M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited(b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction.(d) APP based polymeric membrane shall be “SUPER THERMOLAY” manufactured by M/s STP Ltd or “WP Shield” manufactured by M/s Sika India Pvt Ltd or equivalent of M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited(e) Water proofing paint shall be by M/s STP Ltd or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited

AI Tender Summary

OUR REF NO 31014363
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 01-03-2022
Authority
Authority Name Military Engineer Services
Work Description Repairs To Joinery Roof Sheet Tiling Repairs To Joinery Roof Sheet Tiling Ceiling Plastering And Other Misc Br Work In Tarapore Vihar Vikram Batra Vihar 13 Engr Regt And Csr Under Age Br-Ii Of Ge Sukna
Basic Detail
Tender No GE Sukna/8373
Bidding Type Tender
Location
City sukna
State West Bengal
Key Dates
Publish Date 08 Feb 2022
Submission Date 01 Mar 2022
Open Date 03 Mar 2022
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 90000
Exemption Not Available
Document List
Tender_8373.pdf
609b8d68-1bbc-4b6c-b004-3544a20213ea.html
BOQ_566221.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 08, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 01, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 03, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tender_8373.pdf

html

609b8d68-1bbc-4b6c-b004-3544a20213ea.html

xls

BOQ_566221.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders