Providing Running Water Supply Arrangement At Anganwadi Center Within Or 100 Mtr. From School Premises Of Galsi-Ii ( 122 Nos ) Block Under Burdwan Division P.H.E. Dte._2Nd Call
Tender Value
59.41 Lakhs
Estimated cost
Bid Submission
25 Feb 2022
0 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
galsi → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Running Water Supply Arrangement At Anganwadi Center Within Or 100 Mtr. From School Premises Of Galsi-Ii ( 122 Nos ) Block Under Burdwan Division P.H.E. Dte._2Nd Call
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone)including removing spreading or stacking the spoils within a lead of 75m as directed and including trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing or pumping out water est.\"s required complete. a) depth of excavation not exceeding 1.5m (not requiring shoring). |
| 2 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 3 | Single brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints withlocal sand. |
| 4 | Cement Concrete (1:2:4) with graded stone chips (20mm size) excluding shuttering and reinforcement, if any, in ground floor , as per relevant IS Cods.A) Pakur |
| 5 | Brick work with 1st class bricks in cement mortar (1:6) cement sand morter in foundation plinth etc. |
| 6 | Cement Concrete (1:1.5:3) with graded stone chips (20mm size) excluding shuttering and reinforcement, if any, in ground floor , as per relevant IS Cods.A) Pakur |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders, etc.initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (a) For works in foundation, basement and up to roof of ground floor / up to 4m i) Tor Steel (other than TATA/SAIL) |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out aftercompletion of works (upto roof of ground floor)(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht.shall be allowed under 12 (e) for every 4 m or part thereof) (a) 25 mm to 30 mm thick wooden shutter ing as per decision & direction of Engineer-In-Charge. a) Side Shuttering-Roof outside |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including throating, nosing & drip course where necessary. GROUND FLOOR:- B) With (1:6)-15 mm thick |
| 10 | Neat cement punning about 1.5mm thick in wall, dado, window, sills, floor, drain, etc. |
| 11 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipe |
| 12 | a) 32 mm dia PVC Pipe |
| 13 | a) 15 mm dia PVC Pipe |
| 14 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). |
| 15 | a) 15 mm dia |
| 16 | b) 20 mm dia |
| 17 | c) 32 mm dia |
| 18 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)For Exposed Work |
| 19 | a) 15 mm dia |
| 20 | b) 20 mm dia |
| 21 | d) 32 mm dia |
| 22 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work |
| 23 | a) 15 mm dia PVC Pipe |
| 24 | b) 20 mm dia PVC Pipe |
| 25 | Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 m |
| 26 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer a) 1000 LitreCapacity |
| 27 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. |
| 28 | Labour for punching hole in plastic water storage tank upto 50 mm dia |
| 29 | Mazdoor for cleaning and disinfection etc |
| 30 | Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings. (As per ASTM D 2467, Schedule 80,a) 15 mm dia |
| 31 | R.C.C. well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with cement mortar 1:2 complete as per direction. a) 65 mm thick and 0.9 metre internal dia. |
| 32 | Supply of ordinary brick bats for filling the pit |
| 33 | Labour for filling the Pit with bricks bats.1/4 * 1 Mazdoor =1/4 * Rs. 245.00 = Rs. 61.25 |
| 34 | Supplying,hoisting,fitting and fixing R.C.C. precast thin lintels, 75 mm. thick (1:1.5:3) conforming to the specification laid down in C.B.R.I. data sheet No.1 with stone chips, sand, cement and reinforcement (both main and distribution) bars upto 1.00 percent as per drawing and specification including placing in situ and supporting arrangement for taking the load of super-imposed brick work and striking of the same when directed. II. Other than SAIL/ TATA/RINL |
| 35 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A)UPVC Pipes i) 75 mm dia |
| 36 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 ma) In ground floor including roofi) upto 150 mm thick |
| 37 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 38 | Add 12% GST [For Sl. No. 01 to 28] |
| 39 | Add 1% Cess [For Sl. No. 01 to 28 + 29] |
AI Tender Summary
Tender Timeline
Feb 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 28, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender