Renovation Of Existing Toilets At Ground Floor Of Pcb, Sed, Rid, Cisf Main Gate And Rcd Divisions In Ecil, Hyderabad.- 1 PCB 1.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 2 PCB2.1 Dismantling G.I. pipes (external/internal work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore 3 PCB 3.1 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter 4 PCB 4.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe 5 PCB 4.2 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe 6 PCB 5.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 7 PCB 6.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 8 PCB 7.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below 9 PCB 8.1 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats 10 PCB 9 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 11 PCB 10 Removal of EWC, IWC, wash basin etc., including fittings and as directed by Engineer-in-charge. 12 PCB 11 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 13 PCB 12.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 14 PCB 13.1 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 15 PCB 14.1 Centering and shuttering including strutting, propping etc. and removal of form: Lintels, beams, plinth beams, girders, bressumers and cantilevers 16 PCB 15.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 17 PCB 16.1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 18 PCB 17 providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry 19 PCB 18.1 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) 20 PCB 19 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make: Kajaria / Nitco / Somany / Cera. 21 PCB 20 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc., complete. Make: Kajaria / Nitco / Somany / Cera. 22 PCB 21.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 23 PCB 21.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter 24 PCB 22.1.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm 25 PCB 22.2.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree 75 mm bend 26 PCB 22.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree 110 mm bend 27 PCB 22.3.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110mm Shoe 28 PCB 23.1 Providing and fixing PVC pipeline with necessary fittings etc., complete and as directed by Engineer-in-charge. 40mm dia pipe 29 PCB 24 Providing & fixing 100mm PVC nahani traps with CP steel gratings, bitumen painted before fixing and making good the floor as good as original, CP double jali etc., complete and as directed by Engineer-in-charge. 30 PCB 25.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes 31 PCB 25.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes 32 PCB 26.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 33 PCB 27 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 34 PCB 28.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 35 PCB 29.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade . Make: Asian/Berger/Nerloac New work (two or more coats) over and including water thinnable priming coat with cement primer 36 PCB 30 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Make: Asian/Berger/Nerolac. 37 PCB 31 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 38 PCB 32.1 Finishing walls with Acrylic Smooth exterior paint of required shade : Make: Asian / Berger / Nerolac Old work (One or more coat applied @ 0.90 ltr/10 sqm). 39 PCB 33 Providing and fixing WPC (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm windows door shutter of thickness 25mm including S.S. pressed butt hinges of required size etc., complete and as directed by Engineer-in-charge. 40 PCB 34 Providing and fixing ventilators made with UPVC (Unplasticised polyvinyl chloride) including door/window suitable sections with necessary fixtures, fastners and panel filling with 5mm thick float for windows and 12mm thick WPC (wood plastic composite) white panel etc., complete and as directed by Engineer-in-charge. Make: Finesta/orient/equivalent (with prior approval of Engineer-in-charge) 41 PCB 35.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 42 PCB 36.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 43 PCB 37.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 44 PCB 38.1 Providing and fixing white vitreous pedestal type water closet (European type W.C. pan) of size 39x34.5x57.5 cm with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) with all fittings and fixtures etc., complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. Make: EWC Hindware Popular (Cat No.20044) 45 PCB 39.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous Hindware Acu pan pattern WC pan of size 580x440mm with integral type foot rests. Make: IWC Hindware ACU PAN (Cat No.20044) 46 PCB 40.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Make: Parryware/Hindware/Cera. White Vitreous China flat back Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 47 PCB 41 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 48 PCB 42.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 49 PCB 43.1.1 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 50 PCB 44.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 51 PCB 45.1.1 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 52 PCB 46 Providing and fixing CP Health faucets of approved quality and make with all fittings. Make:Parryware / Hindware-Cat no.F160027/Cera. 53 PCB 47.1 Providing and fixing CP Brass two in one tap of approved quality. Make: Parryware / Hindware / Cera. 15mm nominal bore. 54 PCB 48.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 55 PCB 49.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 56 PCB 50.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore 57 PCB 51.1 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter 58 PCB 52 Providing and fixing SS towel ring round shape of size 200 mm dia with flange and minimum distances of wall face with concealed fittings arrangement of approved quality and colour etc., complete and as directed by Engineer-in-charge. Make: Hindware / Equivalent (with prior approval of Engineer-in-charge.) 59 PCB 53.1 Painting with synthetic enamel paint of approved brand and required color, manufacture to give an even shade : Make: Asian/Berger/Nerolac Two or more coats on new work 60 PCB 54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Make: Asian/Berger/Nerolac One or more coats on old work 61 PCB 55 Supplying soap dispenser or Hand wash dispenser of approved quality as per the direction of Engineer-in-charge. Standard make with prior approval of Engineer-in-charge. Standard make with prior approval of Engineer-in-charge. 62 PCB 56 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make: Parryware/Hindware/Cera 63 PCB 57 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 64 PCB 58.1 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 65 SED 1.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 66 SED 2.1 SED - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 67 SED 3.1 SED Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below 68 SED 4.1 SED Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats 69 SED 5 SEDDemolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. 70 SED 6 SED - Removal of EWC, IWC, wash basin etc., including fittings and as directed by Engineer-in-charge. 71 SED 7 SED Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 72 SED 8.1 SED - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 73 SED 9.1 SED Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 74 SED 10.1 SED Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers 75 SED 11.1 SED Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 76 SED 12.1 SED Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 77 SED 13 SED Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry 78 SED 14.1 SED - 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) 79 SED 15 SED 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. 80 SED 16 SED Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make: Kajaria / Nitco / Somany / Cera. 81 SED 17 SED Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc., complete. Make: Kajaria/Nitco/Somany/Cera. 82 SED 18.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 83 SED 18.2 SED Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter 84 SED 19.1.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm 85 SED 19.2.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5degree 75 mm bend 86 SED 19.2.2 SED Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree 110 mm bend 87 SED 19.3.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe 88 SED 20.1 SED Providing and fixing PVC pipe line with necessary fittings etc., complete and as directed by Engineer-in-charge. 40mm dia pipe 89 SED 21 SED Providing & fixing 100mm PVC nahani traps with CP steel gratings, bitumen painted before fixing and making good the floor as good as original, CP double jali etc., complete and as directed by Engineer-in-charge. 90 SED 22.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes 91 SED 22.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes 92 SED 23.1 SED Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 93 SED 24 SED Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: JK Putty / Equivalent (with prior approval of Engineer-in-charge) 94 SED 25.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 95 SED 26.1 SED Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Make: Asian/Berger/Nerolac. New work (two or more coats) over and including water thinnable priming coat with cement primer 96 SED 27.1 SED Finishing walls with Acrylic Smooth exterior paint of required shade :Make: Asian/Berger/Nerolac Old work (One or more coat applied @ 0.90 ltr/10 sqm). 97 SED 28 SED Providing and fixing WPC (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm windows door shutter of thickness 25mm including S.S. pressed butt hinges of required size etc., complete and as directed by Engineer-in-charge. 98 SED 29 Providing and fixing doors and windows made with UPVC (Unplasticised polyvinyl chloride) including door/window suitable sections with necessary fixtures, fastners and panel filling with 5mm thick float for windows and 12mm thick WPC (wood plastic composite) white panel etc., complete and as directed by Engineer-in-charge.Make: Finesta/Orient / Equivalent (with prior approval of Engineer-in-charge) 99 SED 30.1 SED Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 100 SED 31.1 SED Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 101 SED 32.1 SED Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 102 SED 33.1 SED Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) of size 39x34.5x57.5 cm with seat and lid, 10 litre low level white PVC flusing cistern including flush pipe, with manually controlled device (handle lever) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. Make: EWC Hindware Popular (CAT no.20044) 103 SED 34.1 SED Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous Hindware Acu pan pattern WC pan of size 580x440mm with integral type foot rests. Make: IWC Hindware ACU PAN (Cat no.20044) 104 SED 35.1 SED Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:. White Vitreous China flat back Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 105 SED 36 SED Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 106 SED 37.1 SED Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 107 SED 38.1.1 SED Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 108 SED 39.1 SED Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 109 SED 40.1.1 SED Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 110 SED 41 SED Providing and fixing CP Health faucets of approved quality and make with all fittings. Make: Hindware Cat no.F160027/Cera/Parryware 111 SED 42.1 SED Providing and fixing CP Brass two in one tap of approved quality. Make: Parryware / Hindware / Cera. 15mm nominal bore. 112 SED 43.1 SED Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 113 SED 44.1.1 SED Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 114 SED 45.1 SED Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. Make: Parryware/Hindware/Cera. 15mm nominal bore 115 SED 46.1 SED Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter 116 SED 47 SED Providing and fixing SS towel ring round shape of size 200 mm dia with flange and minimum distances of wall face with concealed fittings arrangement of approved quality and colour etc., and as directed by Engineer-in-charge. Make: Hindware / Equivalent (with prior approval of Engineer-in-charge.) 117 SED 48.1 SED Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Make: Asian / Berger / Nerolac. Two or more coats on new work 118 SED 49.1 SED Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Make: Asian / Berger / Nerolac. One or more coats on old work 119 SED 50 SED Supplying soap dispenser or Hand wash dispenser of approved quality as per the direction of Engineer-in-charge. Standard make with prior approval of Engineer-in-charge. Standard make with prior approval of Engineer-in-charge. 120 SED 51 SED Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make: Parryware / Hindware / Cera. 121 SED 52 SED Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 122 SED 53.1.1 SED Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Make: Jindal or equivalent. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 123 SED 53.2.1 SED Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Make: Jindal or equivalent. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Make: Jindal or equivalent. Powder coated aluminium (minimum thickness of powder coating 50 micron) 124 SED 54.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) 125 SED 55 SED Providing and fixing powder coated (minimum thickness of poweder coating 50 micron) aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 126 SED 56 SED Etching on float glass panes in aluminium work in approved pattern as per the directions of Engineer-in-charge. 127 SED 57 SED Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 128 SED 58 SED Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 129 SED 59.1 SED Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 130 CISF 1.1 CISF Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 131 CISF 2.1 CISF Dismantling G.I. pipes (external/internal work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore 132 CISF 3.1 CISF Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter 133 CISF 4.1 CISF Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe 134 CISF 4.2 CISF Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe 135 CISF 5.1 CISF Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 136 CISF 6.1 CISF Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 137 CISF 7.1 CISF Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below 138 CISF 8.1 CISF Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats 139 CISF 9 CISF Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 140 CISF 10 CISF Removal of EWC, IWC, wash basin etc., including fittings and as directed by Engineer-in-charge. 141 CISF 11 CISF Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 142 CISF 12.1 CISF Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 143 CISF 13.1 CISF Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 144 CISF 14.1 CISF Centering and shuttering including strutting, propping etc. and removal of form: Lintels, beams, plinth beams, girders, bressumers and cantilevers 145 CISF 15.1 CISF Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 146 CISF 16.1 CISF Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 147 CISF 17.1 CISF Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 148 CISF 18 CISF providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry 149 CISF 19 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. 150 CISF 20.1 CISF 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) 151 CISF 21 CISF Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make: Kajaria / Nitco / Somany / Cera. 152 CISF 22 CISF Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc., complete. Make: Kajaria / Nitco / Somany / Cera. 153 CISF 23.1 CISF Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 154 CISF 23.2 CISF Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter 155 CISF 24.1.1 CISF Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm 156 CISF 24.2.1 CISF Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree 75 mm bend 157 CISF 24.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 DEGREE 110 mm bend 158 CISF 24.3.1 CISF Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110mm Shoe 159 CISF 25.1 CISF Providing and fixing PVC pipeline with necessary fittings etc., complete and as directed by Engineer-in-charge. 40mm dia pipe 160 CISF 26 CISF Providing & fixing 100mm PVC nahani traps with CP steel gratings, bitumen painted before fixing and making good the floor as good as original, CP double jali etc., complete and as directed by Engineer-in-charge. 161 CISF 27.1 CISF Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes 162 CISF 27.2 CISF Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes 163 CISF 28.1 CISF Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 164 CISF 29 CISF Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 165 CISF 30.1 CISF Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 166 CISF 31.1 CISF Wall painting with premium acrylic emulsion paint of interior grade, VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. New work (two or more coats) 167 CISF 32 CISF Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 168 CISF 33 CISF Providing and fixing WPC (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm windows door shutter of thickness 25mm including S.S. pressed butt hinges of required size etc., complete and as directed by Engineer-in-charge. 169 CISF 34 CISF Providing and fixing doors and windows made with UPVC (Unplasticised polyvinyl chloride) including door/window suitable sections with necessary fixtures, fastners and panel filling with 5mm thick float for windows and 12mm thick WPC (wood plastic composite) white panel etc., complete and as directed by Engineer-in-charge. Make: Finesta/orient/equivalent (with prior approval of Engineer-in-charge) 170 CISF 35.1 CISF Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 171 CISF 36.1 CISF Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 172 CISF 37.1 CISF Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 173 CISF 38.1 CISF Providing and fixing white vitreous pedestal type water closet (European type W.C. pan) of size 39x34.5x57.5 cm with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) with all fittings and fixtures etc., complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. Make: EWC Hindware Popular (Cat No.20044) 174 CISF 39.1 CISF Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous Hindware Acu pan pattern WC pan of size 580x440mm with integral type foot rests. Make: IWC Hindware ACU PAN (Cat No.20044) 175 CISF 40.1 CISF Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Make: Parryware/Hindware/Cera. White Vitreous China flat back Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 176 CISF 41 CISF Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 177 CISF 42 CISF Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 178 CISF 43 CISF Providing and fixing white glazed vitreous Urinal partition/division fixed brass screws embedded in the wall including making necessary repairs etc., complete and as directed by Engineer-in-charge. 179 CISF 44.1.1 CISF Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 180 CISF 45.1.1 CISF Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 181 CISF 46.1 CISF Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :Make: Parryware/Hindware/Cera 15 mm nominal bore 182 CISF 47.1.1 CISF Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 183 CISF 48 CISF Providing and fixing CP Health faucets of approved quality and make with all fittings. Make:Parryware / Hindware-Cat no.F160027/Cera. 184 CISF 49.1 CISF Providing and fixing CP Brass two in one tap of approved quality. Make: Parryware / Hindware / Cera. 15mm nominal bore. 185 CISF 50.1 CISF Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 186 CISF 51 CISF - Providing and fixing C.P.brass angle cock of quality and make and as approved by Engineer-in-charge. 15mm dia. Make: Parryware/Hindware/Cera. 187 CISF 52.1 CISF Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter 188 CISF 53 CISF Providing and fixing SS towel ring round shape of size 200 mm dia with flange and minimum distances of wall face with concealed fittings arrangement of approved quality and colour etc., complete and as directed by Engineer-in-charge. Make: Hindware / Equivalent (with prior approval of Engineer-in-charge.) 189 CISF 54 CISF Providing and fixing CP Brass urinal push cock of approved quality and colour etc., complete and as directed by Engineer-in-charge. 190 CISF 55 CISF Providing and fixing ball valve (CPVC) of approved quality, high or low pressure etc., complete and as directed by Engineer-in-charge. 191 CISF 56 CISF Supplying soap dispenser or Hand wash dispenser of approved quality as per the direction of Engineer-in-charge. Standard make with prior approval of Engineer-in-charge. 192 CISF 57.1 CISF Finishing walls with Acrylic Smooth exterior paint of required shade : Make: Asian/Berger/Nerolac New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 193 CISF 58.1 CISF Painting with synthetic enamel paint of approved brand and required color, manufacture to give an even shade : Make: Asian/Berger/Nerolac Two or more coats on new work 194 CISF 59.1 CISF Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Make: Asian/Berger/Nerolac One or more coats on old work 195 CISF 60 CISF Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make: Parryware/Hindware/Cera 196 CISF 61 CISF Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 197 RID 1.1 RID Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 198 RID 2.1 RID Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore 199 RID 3.1 RID Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter 200 RID 4.1 RID Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe 201 RID 4.2 RID Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe 202 RID 5.1 RID Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 203 RID 6.1 RID Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 204 RID 7.1 RID Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below 205 RID 8.1 RID Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats 206 RID 9 RID Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 207 RID 10 RID Removal of EWC, IWC, wash basin etc., including fittings and as directed by Engineer-in-charge. 208 RID 11 RID Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 209 RID 12 RID Demolishing of weldmesh partitions including stacking of useful materials near the site and disposal of unserviceable materials within 50 metere lead etc., complete and as directed by Engineer-in-charge. 210 RID 13.1 RID Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 211 RID 14.1 RID Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 212 RID 15.1 RID Centering and shuttering including strutting, propping etc. and removal of form fo: Lintels, beams, plinth beams, girders, bressumers and cantilevers 213 RID 16.1 RID Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 214 RID 17.1 RID Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 215 RID 18 RID - Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry 216 RID 19.1 RID 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) 217 RID 20 RID 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. 218 RID 21 RID Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make: Kajaria / Nitco / Somany / Cera. 219 RID 22 RID Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Make: Kajaria/Nitco/Cera/Somany. 220 RID 23.1 RID Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 221 RID 23.2 RID Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter 222 RID 24.1.1 RID Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Prince / Sudhakar / Aashirvaad / Astral. Single tee with door 110x110x110 mm 223 RID 24.2.1 RID Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Prince / Sudhakar / Aashirvaad / Astral. Bend 87.5 degree 75 mm bend 224 RID 24.2.2 RID Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Prince / Sudhakar / Aashirvaad / Astral. Bend 87.5 degree 110 mm bend 225 RID 24.3.1 RID Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Prince / Sudhakar / Aashirvaad / Astral. Shoe (Plain) 110 mm Shoe 226 RID 25.1 RID Providing and fixing PVC pipe line with necessary fittings etc., complete and as directed by Engineer-in-charge. 40mm dia 227 RID 26 RID- Providing & fixing 100mm PVC nahani traps with CP steel gratings, bitumen painted before fixing and making good the floor as good as original, CP double jali etc., complete and as directed by Engineer-in-charge. 228 RID 27.1 RID Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes 229 RID 27.2 RID - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes 230 RID 28.1 RID Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 231 RID 29 RID Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 232 RID 30.1 RID Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 233 RID 31.1 RID Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Make: Asian/Berger/Nerolac New work (two or more coats) over and including water thinnable priming coat with cement primer 234 RID 32 RID Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Make: Asian/Berger/Nerolac 235 RID 33 RID Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 236 RID 34.1 RID Finishing walls with Acrylic Smooth exterior paint of required shade :Make: Asian/Berger/Nerolac Old work (One or more coat applied @ 0.90 ltr/10 sqm). 237 RID 35 RID Providing and fixing WPC (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm windows door shutter of thickness 25mm including S.S. pressed butt hinges of required size etc., complete and as directed by Engineer-in-charge. 238 RID 36 RID-Providing and fixing doors and windows made with UPVC (Unplasticised polyvinyl chloride) including door/window suitable sections with necessary fixtures, fastners and panel filling with 5mm thick float for windows and 12mm thick WPC (wood plastic composite) white panel etc., complete and as directed by Engineer-in-charge.Make: Finesta/Orient / Equivalent (with prior approval of Engineer-in-charge) 239 RID 37.1 RID- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 240 RID 38.1 RID - Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 241 RID 39.1 RID - Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 242 RID 40.1 RID Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) of size 39x34.5x57.5 cm with seat and lid, 10 litre low level white PVC flusing cistern including flush pipe, with manually controlled device (handle lever) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. Make: EWC Hindware Popular (CAT no.20044) 243 RID 41.1 RID- Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous Hindware Acu pan pattern W.C. pan of size 580x440 mm with integral type foot rests. Make: IWC Hindware ACU PAN (Cat No.20044) 244 RID 42.1 RID Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 245 RID 43 RID- Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 246 RID 44.1.1 RID Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 247 RID 45.1.1 RID - Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 248 RID 46.1 RID Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 249 RID 47.1.1 RID - Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 250 RID 48.1 RID Providing and fixing CP Health faucets of approved quality and make with all fittings. Make:Hidware Cat no.F160027/Cera/Parryware 15mm nominal bore 251 RID 49.1 RID - Providing and fixing CP Brass two in one tap of approved quality. Make: Parryware / Hindware / Cera. 15mm nominal bore. 252 RID 50.1 RID Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 253 RID 51.1.1 RID - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 254 RID 52.1 RID- Providing and fixing C.P. brass angle cock of quality & make as approved by Engineer-in-charge. 15mm nominal bore 255 RID 53.1 RID- Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter 256 RID 54 RID- Providing and fixing SS towel ring round shape 200 mm dia with flange and minimum distances of wall face with concealed fittings arrangement of approved quality and colour etc., and as directed by Engineer-in-charge. Make: Hindware / Equivalent (with prior approval of Engineer-in-charge.) 257 RID 55.1 RID Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Make: Asian/Berger/Nerolac Two or more coats on new work 258 RID 56.1 RID Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Make: Asian/Berger/Nerolac One or more coats on old work 259 RID 57 RID- Supplying soap dispenser or Hand wash dispenser of approved quality as per the direction of Engineer-in-charge. Standard make with prior approval of Engineer-in-charge. 260 RID 58 RID-Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make: Parryware/Hindware/Cera. 261 RID 59 RID - Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 262 RID 60.1.1 RID- Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Make: Jindal /Equivalent with prior approval of Engineer-in-charge. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 263 RID 60.2.1 RID Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Make: Jindal /Equivalent with prior approval of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Make: Jindal /Equivalent with prior approval of Engineer-in-charge. Powder coated aluminium (minimum thickness of powder coating 50 micron) 264 RID 61.1 RID Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) 265 RID 62 RID Providing and fixing powder coated (minimum thickness of poweder coating 50 micron) aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 266 RID 63 RID - Etching of float glass panes in aluminium work in approved pattern etc., complete and as directed by Engineer-in-charge. 267 RID 64 Providing and laying Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 268 RID 65 RID - Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. 269 RID 66 RID Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness 270 RID 67.1 RID Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 271 RCD 1.1 RCD Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 272 RCD 2.1 RCD Dismantling G.I. pipes (external/internal work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore 273 RCD 3.1 RCD Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter 274 RCD 4.1 RCD Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe 275 RCD 4.2 RCD Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe 276 RCD 5.1 RCD Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 277 RCD 6.1 RCD Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 278 RCD 7.1 RCD Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below 279 RCD 8.1 RCD Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats 280 RCD 9 RCD Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 281 RCD 10 RCD Removal of EWC, IWC, wash basin etc., including fittings and as directed by Engineer-in-charge. 282 RCD 11 RCD Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 283 RCD 12.1 RCD Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 284 RCD 13.1 RCD Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 285 RCD 14.1 RCD Centering and shuttering including strutting, propping etc. and removal of form: Lintels, beams, plinth beams, girders, bressumers and cantilevers 286 RCD 15.1 RCD Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 287 RCD 16 RCD - Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry 288 RCD 17.1 RCD 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) 289 RCD 19 RCD Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc., complete. Make: Kajaria / Nitco / Somany / Cera. 290 RCD 20.1 RCD - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 291 RCD 20.2 RCD Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter 292 RCD 21.1.1 RCD Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm 293 RCD 21.2.1 RCD Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree 75 mm bend 294 RCD 21.2.2 RCD Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 degree 110 mm bend 295 RCD 21.3.1 RCD Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110mm Shoe 296 RCD 22.1 RCD Providing and fixing PVC pipeline with necessary fittings etc., complete and as directed by Engineer-in-charge. 40mm dia pipe 297 RCD 23 RCD Providing & fixing 100mm PVC nahani traps with CP steel gratings, bitumen painted before fixing and making good the floor as good as original, CP double jali etc., complete and as directed by Engineer-in-charge. 298 RCD 24.1 RCD Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes 299 RCD 24.2 RCD - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes 300 RCD 25.1 RCD - Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 301 RCD 26 RCD - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 302 RCD 27.1 RCD Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 303 RCD 28.1 RCd Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade . New work (two or more coats) over and including water thinnable priming coat with cement primer 304 RCD 29 RCd Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Make: Asian/Berger/Nerolac. 305 RCD 30 RCD Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 306 RCD 31.1 RCD Finishing walls with Acrylic Smooth exterior paint of required shade : Make: Asian / Berger / Nerolac Old work (One or more coat applied @ 0.90 ltr/10 sqm). 307 RCD 32 RCD Providing and fixing WPC (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm windows door shutter of thickness 25mm including S.S. pressed butt hinges of required size etc., complete and as directed by Engineer-in-charge. 308 RCD 33.1 RCD Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 309 RCD 34.1 RCD Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 310 RCD 35.1 RCD Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 311 RCD 36.1 RCD Providing and fixing white vitreous pedestal type water closet (European type W.C. pan) of size 39x34.5x57.5 cm with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) with all fittings and fixtures etc., complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. Make: EWC Hindware Popular (Cat No.20044) 312 RCD 37.1 RCD Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous Hindware Acu pan pattern WC pan of size 580x440mm with integral type foot rests. Make: IWC Hindware ACU PAN (Cat No.20044) 313 RCD 38.1 RCD Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China flat back Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 314 RCD 39 RCD - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 315 RCD 40.1.1 RCD Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 316 RCD 41.1.1 RCD Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 317 RCD 42.1 RCD Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 318 RCD 43.1.1 RCD Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 319 RCD 44 RCD Providing and fixing CP Health faucets of approved quality and make with all fittings. Make:Parryware / Hindware-Cat no.F160027/Cera. 320 RCD 45.1 RCd Providing and fixing CP Brass two in one tap of approved quality. Make: Parryware / Hindware / Cera. 15mm nominal bore. 321 RCD 46.1 RCD Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 322 RCD 47.1.1 RCD Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 323 RCD 48.1 RCD Providing and fixing C.P. brass angle cock of quality & make as approved by Engineer-in-charge. 15mm nominal bore 324 RCD 49.1 RCD Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter 325 RCD 50 RCD Providing and fixing SS towel ring round shape of size 200 mm dia with flange and minimum distances of wall face with concealed fittings arrangement of approved quality and colour etc., complete and as directed by Engineer-in-charge. Make: Hindware / Equivalent (with prior approval of Engineer-in-charge.)
