Ministry Of Road Transport And Highways has published Providing Mastic Asphalt At Damaged Locations On Curves From Km 71.48 To Km 85.100 Of Nh-75 B.C.Road Vellore Section. Providing Mastic Asphalt At Damaged Locations On Curves From Km 71.48 To Km 85.100 Of Nh-75 B.C.Road Vellore Section.. Submission Date for this Tender is 14-02-2022. Road Work Tenders in belur Karnataka. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and applying Tack Coat as per Table 500-5 on prepared surface using VG-10 gradeBitumen complying with IS 73-2013 and as per IRC-22 of approved quality and make including cleaning of road surface by Mechanical Broom & dusting by Air compressor, and spraying by Bitumen Pressure Distributor,including cost of all materials, labours, all lead and lift, loading and unloading ,transporting to site, disposal of the excavated stuff, HOM of machineries,etc., complete as per specifications and as per directions of the Engineer-in-charge of the work, Using 80/100 grade Bitumen (VG-10) |
2 | Providing and laying 25 mm thick Mastic asphalt wearing course excluding tack coat with VG-40 comlying with IS 73-2013 (Industrial grade Bitumen) at an average of 15.50% bitumen coarse aggregate, fine aggregate and hydrated lime stone dust as filler, meeting the requirements given in table 500-39, 500-40, 500-41, 500-42 prepared by using mastic asphalt cooker and laid to required level and slope after cleaning the surface with Mechanical broom and dusting with air compressor, including providing antiskid surface with VG-30 grade bitumen precoated hard stone chipping of 13.2mm nominal size at the rate of 0.005 cum/ 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surface is not less than 100 Degrees, protuding 1 mm to 4mm over mastic surface, including cost of all materials, labours, all lead and lift, loading and unloading ,transporting to site, disposal of the excavated stuff, HOM of machineries, etc., complete as per specifications and as per directions of the Engineer-in-charge of the work, |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail