Water Resources Department-WRD has published Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme At Amalnala Project Phase Iii. Tah Rajura, Dist Chandrapur. Submission Date for this Tender is 21-02-2022. Event Management Tenders in chandrapur Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation for roadway / Catch water drainin earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all leads andlifts and spreading for embankment or stacking asdirected. By Manual Means. etc complete with all leads and lifts as directed by Engineer in charg |
| 2 | Watering and compacting of embankment formed of materials obtained from the road cuttingwithin a lead of 50 m, not less than 97% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with Power roller.etc complete with all leads and liftsas directed by Engineer in charg |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete with all leads and lifts as directed by Engineer in charg |
| 4 | Construction of dry lean cement concrete Sub- base over aprepared sub-grade withcoarseandfineaggregate(naturalsand/VSIgrade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days,finishing, curingand includingpreparationofsub- grade surface if required etc complete with all leads and lifts. |
| 5 | Providingandlaying125micronLowDensityPolyethylene(LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour etc complete with all leads and lifts |
| 6 | Providing and laying in situ / ready mix M-15 plain cement concrete of trap /granite/quartzite/ gneissmetal for cast in citu piers, abutment, returns,wingsetc.includingprovisionof"V"shapedfalsejointsto form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steelform work centering(excludingdewateringbymeansofpump)andincluding baillingoutwaterandcuringfinishinginCM1:3etc.complete.as directed by engineer in chargewith all leads and lifts etc complete. |
| 7 | ProvidingandfixinginpositionTMT-FE-500bar reinforcementof variousdiametersforR.C.C.pilecaps,footings,foundations,slabs, beamscolumns,canopies,staircase,newels,chajjas,lintelspardis, copings, fins, arches etc. as per detailed designs, drawings and schedules.includingcutting, bending,hooking thebars, bindingwith wires or tack welding and supporting as required etc. complete with all leads and lifts. |
| 8 | Providingexpansionjointswith25mmthickbituminouspadasper detailed drawings etc. complete. |
| 9 | Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rowsof 40mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 100 x 50 x 6 mm spaced2.5 M C/C 1:2:4 c.c. bedding of size 45 x 30 x 30cm. as per detailed drawing, with 3coatsofapprovedofyellowandblackpaintincludingnecessary excavation in any strata. etc. complete with all leads and lifts. |
| 10 | Providing and laying chequered tiles of approved qualityof size 30 cm x30cm,confirmingtocorrespondingI.S.forflooringinrequired positionlaidonabedof1:4cementmortarincludingcementfloat, filling joint with cement slurry cleaning curing etc. complete with all leads and lifts. |
| 11 | SupplyingandFixingofMoldedShankRaisedPavementMarkers/ Cat"s Eyemade of polycarbonate and ABS moulded body and reflective panelswith microprismaticlenscapable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complyingtoSpecificationsofCategoryAofMORTHCircularNo RW/NH/33023/10-97 DOIIIDt11.06.1997.Theheight,widthand length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the baseshallbe35+/-5degree.Thestrengthofdetachmentofthe integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm andheightnotlessthan30+/-2mm)fromthebodyistobea minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesiveaspermanufacturer"srecommendationandcompleteas directedbytheengineer.Thecontractorshallsubmitatwoyear warrantyfor satisfactory field performance including stipulated retro- reflectance of the reflecting panel, to the Engineer. etc. complete with all leads and lifts. |
| 12 | Providingandfixingofretro-reflectorisedinformatorysignboard rectangular/Squareinshapehavingarealessthan0.9squaremeter madeoutof2 mmaluminumsheetbondedwithwhiteretro reflective sheeting ofClass (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflectivespecified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as perIRC:67-2012 Table No8.3, supported with back supportframe 25mmx25mmx 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mmx6mm,3.5mtlongfirmlyfixedtothegroundbymeansof properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing Theangleironpost shallbedulypaintedwithonecoatofepoxy primer and two coats of epoxy finish paints having alternate black and whitebandsof25cmwidthincludingGIfixuresandtransportation etc.complete.Thenutboltsofboardwithangleironpost/supporting structureafterfixing atsitehastobeelectricallywelded.ClassB( TypeIV Highintensitymicro-prismaticgradesheeting-HIP) sheeting shall have 7 years written warranty fromthe manufacturer and authorised distributor / convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and thiswarranty certificate in original should be submitted to the Engineer in charge by the contractor / supplier as directed by Engineer in charg |
| 13 | Providing and fixing heavy duty inter locking concrete Coloured paving blocksof80mmthicknessofhavingastrengthof300kg/Sq.cm.of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaningetc. complete with all leads and lifts.as directed by Engineer in charg |
| 14 | Providing and laying Cast in situ cement concrete in M20 oftrap/granite/quartzite/gneissmetalforbedblocks,foundation blocks, cut off walls, curtain walls, slab, rigid pavementand such other items including bailing out water,Steel centering, formwork, laying, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surfaceandcuringetc.complete.TheCementMortar1:3plasteris consideredforrenderingunevenandhoneycombedsurfaceonly. Newly laid concrete shallbe covered by gunnybag, plastic, tarpaulin etc.(Woodencenteringwillnotbeallowed.),with mixer etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)as directed by Engineer in charg |
| 15 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.as directed by Engineer in charg |
| 16 | Providing and Installing 880 mm open body slide, single turns, FRP Thickness 6 to 8 mm for height 20 ft with support with slide support structure including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 17 | Providing and Installing 880 mm Closedbody slide, single turns, FRP Thickness 6 to 8 mm for height 20 ft with support with slide support structure including transportation and fixing at site, testing etc completeas directed by Engineer in charg |
| 18 | Providing and Installing family slideFRP Thickness 6 to 8 mm for height 20 ft with support with slide support structure including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 19 | Providing and Installing water multiplay station total height 20 ft with 4 slides (Open Body, Closed body, freefall slide, mutilane slide) with Frp staircase, canopy. Plateform railing etc with attachments8 nos. (Water fall, wheel, inverted fountain ) all pipe structure and costed with pu paints and staicase railing etc) including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 20 | Providing and InstallingRainbow 7 arches of 3" pipes with ss 304 nozzles including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 21 | Providing and InstallingFRP Mushroom unbreslla height 7 ft dia 6 ft thickness 6 to 8 mm with support structure including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 22 | Providing and Installingmulti play system with slides ladder, climber etc including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 23 | Providing and Installing6 seater meri go round (MGR) including transportation and tixing at site, testing etc complete.as directed by Engineer in charg |
| 24 | Providing and Installingsee saw FRP duck type including transportation, testing etc complete.as directed by Engineer in charg |
| 25 | Providing and Installingcrystal climber including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 26 | Providing and Installingpool filtration system for 350 cum including transportation and fixing at site, testing etc complete.as directed by Engineer in charg |
| 27 | Providing and Supplying FRP Paddle Boat 2 Seater(L-9.5 ft x W -5.5 ft x H -2.8 ft) thikcness 4 to 6 mm tare weight 90 kgs with transportation at work site, testing etc complete.as directed by Engineer in charg |
| 28 | Providing and Supplying FRP Paddle Boat 2 Seater (Duck Model) (L-8.85ft x W -5.70 ft x Draft 0.65 ft t) thikcness 4 to 6 mm tare weight 100 kgs with transportation at work site, testing etc complete.as directed by Engineer in charg |
| 29 | Providing and Supplying FRP Paddle Boat 4 Seater(L-13 ft x W -5.5 ft x H -2.8 ft) thikcness 4 to 6 mm tare weight 150 kgs with transportation at work site, testing etc complete.as directed by Engineer in charg |
| 30 | Providing and Supplying FRP Paddle Boat 6 Seater(Duck Model)(L-10.5 ft x W -5.34 ft x H -2.7 ft) thikcness 4 to 6 mm tare weight 200 kgs with transportation at work site, testing etc complete.as directed by Engineer in charg |
| 31 | Providing and SupplyingBanana Boat capacity 6 person (L-5.2 m x W -1.25 m tube dia 0.61 m and side tube dia 0.31m ) with transportation at work site, testing etc complete.as directed by Engineer in charg |
| 32 | Providing and Supplying FRP Flat Bottom 14 Seater Boat With Canopy 15 Hp engine manual(L-14 ft x W -7.3 ft x H -1.1 ft)tare weight 400 kgs with canopy and side railing and all side withtransportation at work site, testing etc complete.as directed by Engineer in charg |
| 33 | Providing and Supplying FRP Motor Speed Boat 40 HP Engine with Remote Control & Steering System (L-4.50 m x B -1.60 m x dept of mould 0.65 m ) weight of boat 300 to 325 kgs with transportation at work site.as directed by Engineer in charg |
| 34 | Providing and Supplying Life Jacket Adults and Childrens with transportation of work site, testing etc complete.as directed by Engineer in charg |
| 35 | Providing and Supplying Life Buoy withtransportation at work site, testing etc complete.as directed by Engineer in charg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
