Construction Of Market Stall At Indurail Adc Village Under Panisagar R.D. Block During The Year 2021-22. Construction Work
Tender Value
24.70 Lakhs
Estimated cost
Bid Submission
19 Feb 2022
0 days left
EMD
24707
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panisagar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Market Stall At Indurail Adc Village Under Panisagar R.D. Block During The Year 2021-22. Construction Work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 3 | Excavating, supplying and filling of local earth (includingroyalty) by mechanical transport upto a lead of 5 km alsoincluding ramming and watering of the earth in layers notexceeding 20 cm in trenches, plinth, sides of foundationetc. complete. |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 5 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:4.1.7 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stoneaggregate 40 mm nominal size) |
| 6 | Centering shuttering including struttings, proppingetc. and removal of form work for:4.4.1 Foundations, footings, bases for columns. |
| 7 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level:5.1.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement 5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement 5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 10 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.1.1 Foundations, footings, bases for columns etc. for massconcrete with timber plank |
| 11 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts withshuttering ply |
| 12 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.5.2 Lintels, beams, plinth beams, girders, bressumers andcantilevers with wooden plank |
| 13 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.4.2 Suspended floors, roofs, landings, balconies and accessplatform with 12 mm thick shuttering ply |
| 14 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete above plinth level.5.20.4 Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 15 | First class brick work in foundation and plinthincluding cost of all materials as required complete:-6.1.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 16 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost ofall materials as required complete:-6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 17 | Supplying and fixing rolling shutters of approved make,made of required size M.S. laths interlocked togetherthrough their entire length and jointed together at theend by end locks mounted on specially designed pipeshaft with brackets, side guides and arrangements forinside and outside locking with push and pull operationcomplete including the cost of providing and fixingnecessary 275mm long wire springs grade No.2 and M.S.top cover of required thickness for rolling shutters &with handles, hold fast including embedding in cementconcrete of required grade required for fixing in position, all necessary fittings, including applying of approvedsteel primer etc. complete as required:-9.6.1 80xl.25mm M.S. laths with 1.25 mm thick top cover. |
| 18 | Providing and laying cement concrete 1:2:4 (1 cement : 2fine sand : 4 graded stone aggregate) flooring finishedwith a floating coat of neat cement including cementslurry, rounding of edges and strips etc. complete.10.8.2 40 mm thick with 20 mm stone aggregate |
| 19 | 15 mm cement plaster on the rough side of single orhalf brick wall of mix:12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 20 | 12 mm cement plaster of mix12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 21 | 6 mm cement plaster of mix :12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand) |
| 22 | Distempering with dry distemper of approved brandand manufacture (two or more coats) of required shadeon new work, over and including water thinnablepriming coat to give an even shade. [Payment shall bemade after submission of Test Certificate issued by theManufacturer] |
| 23 | Finishing walls with textured exterior paint of requiredshade of approved brand and manufacture [Paymentshall be made after submission of Test Certificate issuedby the Manufacturer] :12.29.1 New work ( two or more coats applied @ 3.28 litre/10sqm) over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm |
| 24 | 12.32.3 Painting Steel work with Deluxe Multi Surface Paint togive an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 25 | Neat cement punning |
| 26 | With DewateringEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.I Ordinary Soil Upto 3 m depth |
| 27 | Providing concrete for plain/reinforced concrete in openfoundations complete including formwork as per drawings& MoRD technical specifications Clauses 802, 803, 900,1202 and 1203. (including centering, shuttering, stagingetc. but excluding reinforcement).I P.C.C grade M 10Nominal mix 1:3:6 |
| 28 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres as per direction of the of the Engineer-in-Charge. |
| 29 | 80 mm thick factory made c.c. interlocking paver block of M-35 GradeProviding and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:(a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern. |
AI Tender Summary
Tender Timeline
Feb 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender