Providing Pavement Marking With Hot Applied Thermoplast Paint, Fixing Of Cat Eyes And Other Road Assessories On Various Roads Under The Jurisdiction Of Ahmedabad Cantt Board Providing Pavement Marking With Hot Applied Thermoplast Paint, Fixing Of Cat Ey
Tender Value
14.70 Lakhs
Estimated cost
Bid Submission
11 Feb 2022
0 days left
EMD
73500
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ahmedabad → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Pavement Marking With Hot Applied Thermoplast Paint, Fixing Of Cat Eyes And Other Road Assessories On Various Roads Under The Jurisdiction Of Ahmedabad Cantt Board Providing Pavement Marking With Hot Applied Thermoplast Paint, Fixing Of Cat Eyes And Other Road Assessories On Various Roads Under The Jurisdiction Of Ahmedabad Cantt Board
BOQ
| Sl. No. | Item Description |
| 1 | Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beds as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.zebra patta /bump patta lane/center line/ edge line/cut patta |
| 2 | CAT EYE/Road Stud/RPM: Supplying of Moulded Twin Shank Raised Pavement Markers made of polycarbonates abd ABS moulded body and reflective panels with Micro Prismatic Lens(No Glass Bed Lens) capable of Providing total internal reflection of the light entering the lens face and shall support a load of 13635 kgs. tested accordance to ASTM D 4280 Type H and complying to specification of category A of MORTH Circular NO RW/NH/33023/10-97-DO lll Dt.11.06.1997. The height, width and length shall not exceed 20 mm,130 mm and 130mm and with minimum reflective area of 13 sqcm on each side and slope to the base shall be 35+/-5 degree.The strength of detachment of integrated cylindrical shank,(of diameter not less than 19+/-2 mm and heightnot less than 30+/-2 mm) from the body is to be a minimum value of 500 kgf. Fixing will be by drilling holes on the road for the shank to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommandation and The color of the marker should be as per the IRC 35-2015 and as directed by Engineer-In-charge. |
| 3 | Providing and erecting direction and place identification signs retro-reflectorised sign / cautionary, mandetory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick and supported on a stainless steel post and post should be firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level. The rate not included the cost of post/s and frame work of board, it should be pay separately under tender item sr. no. 4. |
| 4 | Supply and fabrication work for direction and place identification signs retro-reflectorised sign / cautionary, mandetory and informatory sign board from stainless steel 301 pipes in any shapes, articles etc. |
| 5 | Dismentalling existing direction and place identification signs retro-reflectorised sign / cautionary, mandetory and informatory sign board and re-fix to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm including repair the damaged surfaces of pavement.(a) strip type board (apppx 90-100 kg weight) |
| 6 | Dismentalling existing direction and place identification signs retro-reflectorised sign / cautionary, mandetory and informatory sign board and re-fix to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm including repair the damaged surfaces of pavement.(b) small board (appx 40-50 kg weight) |
| 7 | Dismentaling of an existing signage boards by providing new sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick and fix in existing erame work at site. |
| 8 | Only fixing work for Solar road studs by using epoxirazing based adhesive as per manufacturer recommendation and instruction of site engineer |
AI Tender Summary
Tender Timeline
Feb 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender