Military Engineer Services-MES has published Repair To Flooring, Plastering, Ceiling, Joinery And Certain B / R Work Under Age B / R-Ii At Ge Jhansi Repair To Flooring, Plastering, Ceiling, Joinery And Certain B / R Work Under Age B / R-Ii At Ge Jhansi. Submission Date for this Tender is 04-03-2022. Civil Work Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-03-2022 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 2 | M&L for15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed. |
| 3 | M&L for rendering 10 mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 4 | Preparing newly plastered surfaces of wall and applying two coats of oil bound distemberover a coat of puttyto make the surface to be plain and smoothcomplete all as sppecified and directed. |
| 5 | M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floor including terrazo flooringand paving n exc 15cm thickness (below or above the ground level) built in cement mortar and rubbish off the premises, complete all as specified and directed |
| 7 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 8 | M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc, complete all as specified and directed. |
| 9 | M&L for 15 mm thick screed / bedding layer in CM (1:6), complete all as specified and as directed. |
| 10 | M&L for 10 mm thick CM rendering in CM 1:4 as in backing coat, complete all as specified and as directed. |
| 11 | M&L for joint free, non-skid ceramic coloured tiles of size 600x600mm, 8 to 10 mm thick (square/ rectangular), in floors etc, set and jointed in neat cement slurry complete all as specified and as directed. |
| 12 | All as per item No 11 here-in-above but on vertical surfaces such as skirting/dado, complete all as directed. |
| 13 | M&L for 50 mm thick plain cement concrete type D2 (1:4:8) (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 14 | M&L for machine cut Kota stone slab flooring 20-25 mm thick and laid over and incl 20 mm thick screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone as per local trade practice, complete all as specified and directed. |
| 15 | All as per item No 14 above but on vertical surfaces such as skirting/dado over 10mm thick CM rendering in CM 1:4. complete all as specified and directed. |
| 16 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering complete all as specified and directed. |
| 17 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. MAKE - DYNAROOF/JINDAL/TATA |
| 18 | M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest |
| 19 | Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed works such as roof purlins, rafters, fillets ,ridges etc as in ceiling complete all as specified and directed. |
| 20 | M&L mild steel (Fe 410W, Gde 250) work as roof trusses (framed) trussed, purlins, crane gantries ,rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) etc incl two coat of synthetic paint over a coat of primer, completeall as specified and directed . |
| 21 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including snap grid frame work complete all as specified and directed. |
| 22 | S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5 mm dia GI wire from roof/Slab/truss including wall/perimeter runner/channel of 15 mm size with and including 6 mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm duly fixed in ceiling frame work including taking down of ceiling light and point wiring if any and refixing it, complete all as specified and directed. |
| 23 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified and directed. |
| 24 | All as per item No 23 here-in-above but n.exc 1.5 sqm each complete all as specified and directed. |
| 25 | Taking down shutters of any description exc 1 sqm and not exc 02 sqm each, complete all as specified and directed. |
| 26 | S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood colouredPVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as specified and directed. Make : Rajshree / Sintex |
| 27 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails,MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strips of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/or sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. |
| 28 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. Make : Ashish, Classic |
| 29 | S&F of 150mm aluminum handle cast type anodized complete all specified and directed. Make : Ashish, Classic |
| 30 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all specified and directed |
| 31 | S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. incl 3x100mm MS hinges, 2x150mmMS handle, 2x200mm MS Tower bolts and two coat sythetic paint over a coat of pink primer in each door, complete all as specified and directed. |
| 32 | S&F 30 mm Factory Made Solid Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, incl 3x100mm MS hinges, 2x150mmMS handle, 2x200mm MS Tower bolts, 1x300mm MS sliding bolt and two coat sythetic paint over a coat of pink primer in each door, complete all as specified and directed. |
| 33 | M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note :-(a)The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick. |
| 34 | M&L for box type steel window with 80 x 40 x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and including ,grill using12 mm square bar @ 10 cm C/C including , box type hinges with steel handle and steel pag stay complete glazing barsdoweled and welded complete all as specified as directed. Note:-(a)The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick. |
| 35 | M&L for Kitchen cabinets, made of 18 to 20mm thick PVC solid sheet with one side of wooden texture decorative surface, including necessary cutting of sheet in to size, joining with screwes and adhesive fixing to wall with screws, with and including necessary fitting i.e. self closing type hydraulic hinges, SS handle, telescopic type ball bearing slide & runner suitable for drawers and megnetic lock for Kitchen cabinets, PVC bidding tape, complete cabinet(s) make in full width of plateform (max 600mm width), consist of min 05 Nos of kitchen cabinets complete all as specified and as directed for following :- (a) Minimum Two nos cabins, completely (all around) covered with PVC sheet with one door with one or two leaf shutter and one shelf in full depth made out of same materials. (b) One No cabin, completely (all around) covered with PVC sheet with three drawers in full depth made out of same materials, The size of drawers will be decided accordingly to site dimension and requirement. (c) Two Nos cabin completely (all around) covered with PVC sheet with front door having one or two leaf shutter or only with front door. Note : (i)The size of cabins/drawers will be decided accordingly to site dimension and requirement. (ii)The complete work will be carried out in line, level and proper finished manner and without any gap in joints. (iii) Net Opening (L X H) will be measured for payment purpose. Make: Rajshri plastiwood or equivalent |
| 36 | M&L for kitchen cabinets, wall hanging type, made of 18 to 20 mm thick PVC solid sheet with one side of wooden texture decorative surface, including necessary cutting of sheet in to sizejoining with screwes and adhesive fixing to wall with screws, with and including necessary fitting like self closing type hydraulic hinges, SS handle, PVC bidding tape, kitchen cabinets consists of No of cabins having depth of 350mm of required size, All cabins having door(s) with one or two leaf shutter of same materials, complete all as specified and as directed . Note : (i)The size of cabins/drawers will be decided accordingly to site dimension and requirement. (ii)The complete work will be carried out in line, level and proper finished manner and without any gap in joints. (iii) Net Opening (L X H) will be measured for payment purpose. |
| 37 | M&L Framed work (Fe 410W, Gde 250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc including hinges weld etc completeall as specified and directed . |
| 38 | S & F mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed. |
| 39 | S&F sheet glass ordinary quality & glazing with wooden bead/oil puttyin Square n.exc 0.5Sqm in each panel 3 mm thick incl hacking out old broken glass ( any thickness, size, quality or des) complete all as specified and directed. |
| 40 | S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane inl hacking out complete as specified and directed. |
| 41 | M & L for machine cut granite (of any type) tiles 20mm thick, bedded and jointed in counter with gray cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding, polishing and making hole in platform for gas pipe complete all as specified and as directed. |
| 42 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as specified and directed. |
| 43 | M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, complete all as specified and directed. Note: The cost of sand cushion is included. |
| 44 | M&L for 75mm thick plain cement concrete type D2 (1:4:8)(40mm graded aggregate) as in sub base complete all as specified and directed. |
| 45 | M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) as in coping etc complete all as specified. |
| 46 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
