Construction Of Crpf Assistant Commandant Residential Quarter At District Jail Jammu ( Cno. 205-A) Construction Of Crpf Assistant Commandant Residential Quarter At District Jail Jammu ( Cno. 205-A)
Tender Value
22.18 Lakhs
Estimated cost
Bid Submission
12 Feb 2022
0 days left
EMD
44360
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jammu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Crpf Assistant Commandant Residential Quarter At District Jail Jammu ( Cno. 205-A) Construction Of Crpf Assistant Commandant Residential Quarter At District Jail Jammu ( Cno. 205-A)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering withC.C. (1:3:6) (1 cement : 3 coarse sand : 6 Cr. Stone Agg) . All works upto plinth level. |
| 2 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral staircases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with (1:1.5:3) mix (1:1.5:3) (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20 mm nominal size). |
| 3 | Centering and shuttering including strutting, propping etc and removal of form for: |
| 4 | Suspended floors, roofs, landings, balconies and access platforms |
| 5 | Edges of slabs and breaks in floors and walls(Under 20 cm wide ) |
| 6 | Brick work with common burnt clay F.P.S. (non-modualar) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement : 6 coarse sand). |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 8 | 15 mm cement plaster on single or half brick wall of mix 1:6 (I cement : 6 fine sand). |
| 9 | Finishing walls with acrylic smooth exterior emulsion like apex or equivalent of required shade on new work (two or more coats) over and including priming coat of exterior primer applied @ 2.20 Kg/10 sq.m.) |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Sal wood |
| 11 | Providing and fixing in positionpowder coated aluminium (min. 16 gauge ) in Doors, windows and Ventlator including cost of aluminium frame, acessories, fixtures, glazing (5 mm thick plain glass), wire guage, etc.all complete, including all leads, lifts, costs and carriages of all materials involved. (Section of Aluminium as directed by EIC with prior approval) |
| 12 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x600 mm ) |
| 13 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laidon 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 16 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 17 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete wherever required. |
| 18 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.22.1 With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws30 mm |
| 20 | Extra for providing and fixing flush doors with decorativeveneering instead of non-decorative ISI marked flush door shutters conforming to ISI: 2202 (Part-I)9.23.1 On one side only |
| 21 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge with Second class deodar wood (35 mm) |
| 22 | Carriage of materials by mechanical means : |
| 23 | Carriage of sand from samba 45 Km by mech. Means and 100 mtr. by head load. |
| 24 | Carriage of Stone Aggregate 26 Km. by mech. Means and 100 mtr. by head load. |
| 25 | Carriage of Bricks from Mishriwala Jammu 25 Km. by mech. Means and 100 mtr. by head load. |
| 26 | Providing and fixing in position sanitary and plumbing items ….. Complete job including costs and carriages of all materials involved of superior and approved make as approved and directed by EIC. |
| 27 | 4\" Dia. PVC Pipe |
| 28 | 4\" PVC Plain Bend |
| 29 | 4\" PVC Door Bend |
| 30 | 3\"\" PVC Pipe |
| 31 | 3\" PVC Plain Bend |
| 32 | PVC Floor Trap |
| 33 | 4\" Dia. M.S. Clamp |
| 34 | 3\" Dia . M.S. Clamp |
| 35 | Washbasin with pedestal complete job |
| 36 | Western W.C. with PVC Flushing cistern and bend etc. all complete. |
| 37 | Looking Mirror 2\"0\" x 2\"6\" |
| 38 | 1\" spacers for Looking Mirror |
| 39 | Towel Ring |
| 40 | S.S. Soap case |
| 41 | S.Body |
| 42 | PVC Connection |
| 43 | C.P. Grating |
| 44 | Waste pipe with coupling |
| 45 | CPVC pipe 35 mm with fittings |
| 46 | CPVC pipe 25 mm with fittings |
| 47 | Tank Nipple 0.75\" |
| 48 | Tank Nipple 1\" |
| 49 | Ball Valve 0.75\" & 1\" |
| 50 | Foot valve |
| 51 | storage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 52 | Towel Rod |
| 53 | Bib Tap- (Long Body) |
| 54 | Gysers 25 ltr. Of approved make |
| 55 | Basin Mixer |
| 56 | CP Nipple |
| 57 | CP Cup |
| 58 | SS Sink of approved make and size 610 X 460bowl depth 200m |
| 59 | Angle valve |
| 60 | 1H.P. water pump/motar with fittings of make Crompton, Havells |
| 61 | Providing and fixing S.S. curtain rodswith SS brackets, end knobs and all other required fittings and fixtures …. Complete job. |
| 62 | Wiring for light/Fan point with 1.5 sq.mm FRPVC insulated copper cable in surface /recessed medium class PVC conduit with suitable G.I. Box, modular type switch complete. |
| 63 | Wiring for circuit/submain wiring of FRPVC insulated copper conductor cable. |
| 64 | (i)2 x 1.5 sq.mm. |
| 65 | (ii)2 x 2.5 Sq.mm. |
| 66 | (iii)2 x 4.0 sq.mm. |
| 67 | Providing and fixing modular dumieesswitches ………. Complete job. |
| 68 | Providing and fixing ceiling rose …… complete job. |
| 69 | Providing and fixing of following modular type switch/socket combined of make Anchor Roma or equivalent. |
| 70 | (i) 10 A |
| 71 | (ii)20 A |
| 72 | Providing and fixing following MCB\"s distribution boxes double door heavy duty (12 way). |
| 73 | Providing and fixing of following type MCB\"s/switch gear of L&T, Heavells, Anchor or equivalent make ( 6A to 32A). |
| 74 | Providing and fixing 48\" sweap ceiling fan of crompton, Orient or equivalent make with allied accessories complete job . |
| 75 | Providing and fixing modular stepped type fan dimmers. |
| 76 | Providing and fixing modular angle / straight holders. |
| 77 | Providing and fixing LEDlamp of Orient, Crompton or equivalent make. |
| 78 | (i) 9 watt |
| 79 | (ii)40 watt |
| 80 | Providing and fixing of following type MCB\"s/switch gear of L&T, Anchor or equivalent make |
| 81 | (i) 63A -SPN |
| 82 | (ii)32A - DP |
| 83 | Providing and fixing ceiling Fan clamps with fasteners including cost of extension rod . |
| 84 | Providing and fixing of 25 mm size of med. Class PVC conduit along with accessories in surface /recessed ….. Complete job including cutting the wall and making good the surface with plastering etc. all complete. |
| 85 | Providing and fixing of following sizes of 2 core Aluminium cable. |
| 86 | (i)2 x 16 sq.mm. cable |
| 87 | Providing and fixing phenolic laminated sheets to cover the junction boxes 3 mm thick. |
| 88 | (i) 5\" x 5\"to 12\" x 12\" |
| 89 | Providing and fixing exhaust fan of crompton, Orient or equivalent make with allied accessories complete job . |
AI Tender Summary
Tender Timeline
Feb 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 12, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender