Providing Lwss To Tail Ended Village Ghumarth And Adjoining Village By Construction Of Percolation Well In Sukker Khad In Bijahri Distt. Hamirpur Hp Sh C O Percolation Well Clear Water Sump Well 15000 Liters At Head Works And Main Storage Tank 50000 Liter
Tender Value
36.49 Lakhs
Estimated cost
Bid Submission
18 Feb 2022
0 days left
EMD
62250
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
barsar → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Lwss To Tail Ended Village Ghumarth And Adjoining Village By Construction Of Percolation Well In Sukker Khad In Bijahri Distt. Hamirpur Hp Sh C O Percolation Well Clear Water Sump Well 15000 Liters At Head Works And Main Storage Tank 50000 Liters Pump House At Head Works
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in foundation for digging well in dry excavation from gravel level upto the level where well curb is placed, including disposing of soil within allradius and filling space outsidethe well after completion from N.S. level to 1.5 meters depth in all kind of soil such as pick work,jumper work, blasting work Soft/hard Rock chiseling workSoft/hard Rock(where blasting is prohibited) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Excavation in foundation , trenches etc., in all kinds of soil suchas pickwork, jumper work blasting work, insoft / hard rock, including chiseling wedging out of rocks clearance of bushes etc.including shoring, dewatering etc. in all leads and lifts stacking the excavatedsoilupto any lead and liftclear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus earth within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work. |
| 3 | Wet well sinking in gravel including all pumping, shoring etc.complete in all respect. |
| 4 | From spring level to 3.00 meters belowspring level in all leads and lifts. |
| 5 | Exceeding 3 meters, but upto 6.00 metersbelowspring level in all leads and lifts. |
| 6 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of redlead paint. In beams joists channels, angles, tee, flats with connection plates or angle cleets as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 7 | Lowering steel well curb in the pit and assembling in position in all depthcomplete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 8 | Providing and laying cement concrete work 1:1.5:3 (1 Cement:1.5 Sand :3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : |
| 9 | Foundations,footings bases of columns and the like and massconcrete in all leads and lifts. |
| 10 | Suspended floors,roofs,landing shelves and their supports balconies beams,girders bressumers and cantilever upto floor two level including carriage ofmaterial in all leads & lifts. |
| 11 | Columns, pillars posts and struts upto floor two levelin all leads and lifts. |
| 12 | Archesupto floor two level |
| 13 | Providing and Layingcement concrete Design mix. M-25 not less than 1:1.5:3 nominal size (1Cement :1.5 Sand:3graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work and reinforcement forreinforced concretework in :- |
| 14 | Foundations,footings bases of columns and the like and massconcrete in all leads and lifts. |
| 15 | Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses ,plinth and string courses etc. from top of foundation upto floor two levelin all leads and lifts. |
| 16 | Providing and laying no fine concrete 1:4 (1 Cement:4 stone)aggregate 20mm nominal size) and curing complete in foundation andplinth excluding the cost of form work complete involving all leads and lifts to the entire satisfaction of Engineer-in-charge. |
| 17 | Providing and Layingcement concrete1:3:6 (1Cement :3Sand:6 graded stone aggregate 40 mm nominal size) includingcuring complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 18 | Providing tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level including carriage of material in all leads & lifts. |
| 19 | Steel work welded in built up sections,trusses & framed work, including cutting ,hoisting & fixing in position & applying a priming coat of red leadpaint :- In grating, framed ,guards,bars, ladders, railing, brackets & similar works in all leads and lifts.. |
| 20 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the samefor insitu reinforced concrete and plain. |
| 21 | Foundation footing and base of column and the like and mass concrete complete in all leads and lifts.. |
| 22 | Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 23 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. above200mm. In thickness with in all leads and lifts &to the entire satisfaction of the Engineer-in-charge |
| 24 | Sides & soffits of beams,haunching,cantilevers,bressumers & lintles not exceeding1.00 mts. In depth in all heights from floor in all leads and lifts. |
| 25 | Providing from work of ordinary timber plankings so as to give a rough finish including centring,shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceililng not exceeding 4 metres and removal of the same for insitu reinforced concrete. |
| 26 | Arches upto6 metres span. |
| 27 | Square rubble masonary coursed with hard stone of approved quality inin cement mortar 1:4( 1cement:4 sand ) in all leads and lifts.:- |
| 28 | Foundation footing and base of column and the like and mass concrete. |
| 29 | AboveNSL ground level |
| 30 | Squared rubble stone masonry/polygonal rubble masonery ( uncoursed / brought to couses) with hard stone of approved quality in foundation& plinth including leveling up with cement concrete 1:6:12 ( 1cement :6sand : 12 graded stoene aggregate 20mm nominal size ) at plinth level in cement mortar1:6 ( 1 cement :6 sand ) in all leads & lifts |
| 31 | Providing and Layingcement concrete1:6:12 (1Cement :6Sand:12 graded stone aggregate 40 mm nominal size) includingcuring complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 32 | Brick work using common burnt clay building bricks (IInd class) in super structure above ground levelupto floor two level in cement mortar 1:6 (1cement:6 sand)in all leads and lifts. |
| 33 | Half brick masonery in common burnt clay building bricks in super structure above ground level upto floor to level incement mortar 1:4( 1cement :4sand) 2nd class birck complete in all leads and lifts. |
| 34 | Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position with second class deodar wood in all leads and lifts. |
| 35 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws in all leads and lifts in 40mm thick 2nd class Deodar wood. |
| 36 | Providing and fixing wire gauge shutters using galvanised M.S. wire gaugeof I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws with necessary screws 40mm thick withs 2nd class Deodar wood in all leads and lifts. |
| 37 | 20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) within all leads and lifts. |
| 38 | 6 mm cement plaster to ceiling in CM 1:4 (1Cement :4 Sand) in all leads and lifts. |
| 39 | 15 mm cement plaster in single coat of fair sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) within all leads and lifts. |
| 40 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts. |
| 41 | Providing in RCC work smooth finishing of the exposed surfacewithcement mortar 1:3 (1 cement : 3 sand) with in all leads and lifts &to the entire satisfaction of the Engineer-in-charge. |
| 42 | Laying jointing andtestting of GMSpipe followingdia (medium/ lightclass) for scour pipe, inlet pipe , over flow pipe &distribution systemincluding carriage of material in all leads & lifts.( Labour rates.) |
| 43 | 65mm dia . |
| 44 | Providing and fixingdouble flanged C.I sluice valve offollowingdia (with hand wheel) as per IS: 780 (including brass spindleand as per IS: 2906 class P.N. 1.0complete with bolts., nuts, rubber insertion etc. ( along withtail pieces if required) followingdia including all leads and lifts complete.( Bir make) with M.S. flanges oftable 5. |
| 45 | 65 mm dia . |
| 46 | Manufacturing & fixing manhole cover of size 60x60cm made of angle iron size 40x40x5mm thick covered with M.S .flate including hingeses, handles, holdfast,locking arrangemetns, lock keyStandard makeincluding priming coat with red oxide paint and fixing with cement concrete 1:1.5:3 ( 1cement :1.5sand :3graded steone aggregate20mm nominal size ) complete in all respects. |
| 47 | Constructing chamber for sluice valves with C.I surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab1:2:4(1cement:2sand: 4 graded stone aggregate 20mm nominal size )100mm thick foundation concrete 1:5:10(1cement:5sand:10 graded stone aggregate 40mm nominal size ) and insideplastering with cement mortar 1:3(1cement:3sand) finished witha floating coat of neat cement including curing complete with 600x600x750mm inside size with 150mm thick wall of RCC 1:2:4 ( 1cement :2sand :4 graded stone aggregate20mm nominal size ) complete with form work and reinforcment with 6mm bars at not exceeding 150mm centres both ways in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 48 | Providing andfixing 200mm wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes with 200mm x200mmx100mm cement concrete 1:3:6 ( 1cement :3sand :6 graded stone aggregate 20mm nominal size and curing completewith in all leads and lifts &to the entire satisfaction of the Engineer-in-charge |
| 49 | Distempering two coat with dry distemper of approved brand and manufacturers of required shade of undecorated wall surfaces to give even shade over and including a priming coat of whitingof approved brand and manufacturer after throughly brushing the surface from motor dropping and other foreign matter and also including preparing the surface even and sand papering smoothpriming coat with distemper primer in all leads and lifts. |
| 50 | Painting two coats(excluding priming coat) on new steel and other metal surfaceready mixed paint brushing the give and evenshade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. |
| 51 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and evenshade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. |
| 52 | White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts. |
| 53 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 54 | Providing and fixing M.S.fan clamp(Type-Iof 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete in all leads and lifts. |
| 55 | Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm 1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal sizein all leads and lifts.. |
| 56 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete in all leads and lifts. |
| 57 | Sliding door bolts 250x16mm. |
| 58 | Tower bolts (Barrel type) leads and lifts. 200x10mm. |
| 59 | Handles 125 mm dia |
| 60 | Providing and fixing M.S. grill of required pattern in wooden frames of windows etc. with M.S. flat square or roundedwith round head nuts and bolts or by screwed completein all leads and lifts. |
| 61 | Stone/Boulder fillingdry hand packed tightly under lean concrete to prevant the entry of surfce water , floors/behind retaining wallsin all leads and lifts. |
| 62 | Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)incliding rubbing and polishing complete with tiles ofshadesgraey in all leads and lifts. |
AI Tender Summary
Tender Timeline
Feb 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender