Rural Development Government Departments Closing in 0 days TDR #30962588

Under Jal Jeevan Mission Programme Pandhurli Supply Scheme Tal. Sinnar Dist.Nashik

Issued by Government Departments · sinnar, Maharashtra
Tender Value
1.47 Crore
Estimated cost
Bid Submission
17 Feb 2022
0 days left
EMD
1.48 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sinnar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Under Jal Jeevan Mission Programme Pandhurli Supply Scheme Tal. Sinnar Dist.Nashik

BOQ

Name of Work : Under Jal Jeevan Mission Programme Pandhurli Village Water Supply Scheme Tal. Sinnar, Dist. Nashik
Sl. No. Item Description
1Sub Work No. 1 - EXISTING PRODUCTIONWELL DEEPENINGItem No. 1 - Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling.Hard Strata Lift 18.00 to 19.50 M
2Lift 19.50 to 21.00 M
3Item No. 2 - Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.Note :- 1) The Contractor at his request may allowed to start construction of masonary steining so as not to allow silting of well in oncoming mansoon and while paying masonary, 25% amount shall be withheld and released only when excavation to the full depth is completed.2) Total dewatering charges are to be proposed in tender as lumpsum amount and 75 % is payable for excavation and 25% is payable for construction of well /gallery. Out of 75 % excavation breakup shall be as under 25 % for last 1 Mtr. Depth., 20% for 2 M depth which just above last 1 M depth. 15% for the rest of depth from water table level. The aboe conditions will restrict the tendancy of agencies to avoid deeping of wells etc. to the required depths.
4Item No. 3 - Drilling of Horizontalbore well 150 mm dia by D.T.C. machine, including transportation of machine at work site
5Sub Work No. 2 - EXISTING PRODUCTIONWELL REPAIRING AND DEEPENINGItem No. 1 - Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refilling.Hard Strata Lift 18.00 to 19.50 M
6Lift 19.50 to 21.00 M
7Item No. 2 - Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.Note :- 1) The Contractor at his request may allowed to start construction of masonary steining so as not to allow silting of well in oncoming mansoon and while paying masonary, 25% amount shall be withheld and released only when excavation to the full depth is completed.2) Total dewatering charges are to be proposed in tender as lumpsum amount and 75 % is payable for excavation and 25% is payable for construction of well /gallery. Out of 75 % excavation breakup shall be as under 25 % for last 1 Mtr. Depth., 20% for 2 M depth which just above last 1 M depth. 15% for the rest of depth from water table level. The aboe conditions will restrict the tendancy of agencies to avoid deeping of wells etc. to the required depths.
8Item No. 3 - Providing & fixing in position steel bar \"reinforcement of various dia. for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases, newels chajjas, lintels, pardies copings fins, arches, etc. as per detailed \"design & drawing & schedules, including cutting, bending, hooking the bars, binding with wire track \"welding & supporting as required, etc. complete Tor Steel
9Item No. 4 - Drilling of Horizontalbore well 150 mm dia by D.T.C. machine, including transportation of machine at work site
10Item No. 5 - Providing and fixing M.S. chaquerred plate flooring of following thickness supported on M.S.angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plate to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-
11Sub Work No. 3 - Pumping Machinery Item No. 1 - Providing and erecting and giving test of 100 mm dia submersible pump sets conforming to IS 8034 and motor conforming to9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and bronze impelier .Motor suitable for working on 415v+10% ph 50hz A.C supply with cable guard ,thrust carbon /bed bearing to with stand with cable entire hydraulic thrust,waterproof winding shall be provided .The pump set shall be suitable for direct coupling ,pump shall have suitable out let as per manufactures design ,Anti thrust stream lined non return valve shall be provided with the pump .Suitable valve shall be provided with the pump .Suitable suction strainer shall also be provided .3 core ,single /double run copper conductor submersible type of flat cable 3 m and 2 pairs of erection 65 mm width 10 mm be provided along with thepump rates per pump up to 8 stages are as below.Pump Sets 27.5 HP
12Item No. 2 -Supplying and erecting G. I. Pipe in position for suction, delivery for centrifugal pump, vacuum pump and drop for submersible pump including plumbing with socket and necessary material. G. I. Pipe ‘C’ ClassGI 100 mm dia Class- C
13Item No. 3 - Providing lowering, laying & jointing 3.5 core x 50 sqmm alluminium conductor armoured cable from MSEDCL point to incommer of Panel etc.comp.
14Item No. 4 -Providing and fixing M. S. clamps for Holding 50 mm diaG. I. Pipe
15Item No. 5 - Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.
16Item No. 6 - Providing tools for pumping.1) Double ended open jaws spanner of selected carbon steel and chrome plated size 6-32 mm (set of 12 pieces) - 1 Set, 2) Ring spanner set (bi-hexagonal) shallow half set selected carbon steel and chrome plated size 6-32mm (set of 12 pieces) - 1 Set, 3) Ball pein hammer with handle 800 gms - 1 No., 4)Insulated combination cutting plier 200 mm - 1 No., 5) Adjustable screw-wrench 250 mm - 1 No., 6)Pipe wrench stilson .: selected carbon steel chrome plated size 450 mm - 60 mm - 1 No., 600 mm - 76 mm - 1 No., 7) Screwdriver electrical patterned blade for selected steel chrome plated size 6 X 300 mm - 1 No., 8 X 200 mm - 1 No.,8) Hacksaw frame 300 mm size with heavy duty blade - 1 No., 9) Tool Box fabricated from MS Sheet 50 x 50 x 30 cm - 1 No., 10) Electronic supply tester - 1 No.
17Item No. 7 -Supply and erecting,flat flexible submersible cable with, copper conductor, PVC insulated, and PVC Seathed 3 x 10 core Submersible Cable
18Item No. 8 Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification No. EA-EP
19Item No. 9 - Providing eredcting triple spur gear type chain pully block suitable for capacity as below with 6 m lift complete with load chain and hand chaon suitable for above lift tested to 50 % over load as per IS 3832 carrying ISI mark1 Tonne Capacity
20Sub Work No. 4 - Pure Water Rising Main Item No. 1 - Providing ISI mark G.I. pipe of following class and dia.excludingGSTleviedbyGOI&GOMinall respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.GI 150 mm dia Class- B
21Item No. 2 - Providingandsupplyinginstandardlengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement jointsincludingcostofcouplers,asperIS specificationno.4985/1988excludingGST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rainsincludingcostofjointingmateriali.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). PVC Pipe 180 mm dia, 10 kg/cm2
22Item No. 3 -Providing G.I Pipe specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
23Item No. 3 - Providing PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
24Item No. 4Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve 150 mm dia PN 1
25Item No. 5 - ProvidingandsupplyingISImarkCID/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loadingintotruck,transportationupto departmental stores, unloading, stacking excludingGSTleviedbyGOI&GOMinall respect etc. complete.Reflux valves as per I.S.5312 Part I (1984).Reflux Valve 150 mm dia PN 1
26Item No. 6Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve for washout 80 mm dia PN 1
27Item No. 7 Providingandsupplying Air Valves asper IS-14845-2000 andMJP’sstandard specifications of approved make andquality of following diameters including railway freight,inspectioncharges,unloadingfrom railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GSTlevied by GOI & GOM in all respect etc. complete.Air Valve 25 mm dia PN 1
28Item No. 8 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
29Item No. 9 - Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.
30Item No. 10 - Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyondarea and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
31Item No. 11 - Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete.
32Item No. 12 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
33Item No. 13 - Lowering,layingandj ointingG.I .pipesand specials of following class and diameter including conveyance from stores to site of works, all labour, etc.completeeither undergroundorinvertical position, as directed by Engineer-in-charge.GI 150 mm dia Class- B
34Item No. 14 -Lowering,layingand jointingwithP.V.C. pipesandspecialsoffollowingclassand diameterincludingcostofconveyancefrom storestositeofworksincludingcostofall labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).PVC Pipe 180 mm dia, 6 kg/cm2
35Item No. 15 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.)Sluice Valve 150 mm dia
36Item No. 16 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete (Rates for all class of valves)Reflux Valve 150 mm dia
37Item No. 17 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.) Sluice Valve 150 mm diaSluice Valve 80 mm dia
38Item No. 19 - Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines.
39Item No. 20 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.1:2:4 (M-150 ) grade for encasing
40Item No. 21 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
41Item No. 22 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
42Item No. 23 - HydraulictestingofG. I.pipelinetospecified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessaryequipments,labouroperationcharges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.GI 150 mm dia Class- B
43Item No. 24 - Hydraulic testing of PVC pipe line to specified pressure includingcost ofall materialsandlabourandwaterfortestingfor specifiedlengthincludingcutting,placingend capmakingarrangementforfillingsafewater usingreciprocatingtypepumpswhichshould beabletoprovidespecifiedtestpressure gauges and other necessary equipments, labour,operationcharges,etc.requiredfor testing.Therateunderthisitemshallalso includecostofretesting,ifnecessaryand reinstating to original position.PVC Pipe 180 mm dia, 10 kg/cm2
44Sub Work No. 5 -RCC ESR OF CAPACITY 2,20,000 LTR (Stg. Ht. 12 M)Item No. 1 -Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/cfor E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material chargesincluding lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. (Other details are as per Concern MJP DSR)
45Item No. 2 - Dismantling of ESRs of various capacities and heights using crane (10 MT capacity) and handing over M.S./ C.I./G.I. pipes, valves, bends, etc. to the Department. However taking steel reinforcement by the dismantling agency including removing dismantled materials from site and disposing them at suitable place as directed, etc. complete.
46Item No. 3 - Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.CIDF Pipe 200 mm Dia
47Item No. 4 - M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour,scaffolding,hydraulictestingetc. complete.CIDF Pipe Specials
48Item No. 5 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Inlet Sluice Valve 200 mm Dia (PN 1)
49Outlet Sluice Valve 200 mm Dia (PN 1)
50Bypass Sluice Valve 200 mm Dia (PN 1)
51Item No. 6 -Providing ISI standard R.C.C. pipes in standard lengths of following class and diametersuitableforeithercollarjointsor rubberringjoints,excludingGSTlev-iedby GOI&GOMinallrespectincludinginspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.RCC NP II 200 mm dia Pipe
52Sub Work No. 6 - Distribution SystemItem No. 1 - Providing ISI mark G.I. pipe of following class and dia.excludingGSTleviedbyGOI&GOMinall respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.GI Pipe 65 mm dia Class- B
53Item No. 2 - Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).160 mm dia 4 Kg/cm2 PVC Pipes
54110 mm dia 4 Kg/cm2 PVC Pipes
5590 mm dia 4 Kg/cm2 PVC Pipes
5675 mm dia 4 Kg/cm2 PVC Pipes
57Item No. 3 - Providing GI/ HDPE/ PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
58Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 65 mm dia PN 1
59Sluice Valve 80 mm dia PN 1
60Sluice Valve 100 mm dia PN 1
61Item No. 5 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
62Item No. 6 - Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.
63Item No.7 - Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyondarea and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
64Item No. 8 - Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.
65Item No. 9 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
66Item No. 10 - Lowering,layingandj ointingG.I .pipesand specials of following class and diameter including conveyance from stores to site of works, all labour, etc.completeeither undergroundorinvertical position, as directed by Engineer-in-charge.GI 65 mm dia Class- B
67Item No. 11 - Item No. 17 - Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint)160 mm dia 4 Kg/cm2 PVC Pipes
68110 mm dia 4 Kg/cm2 PVC Pipes
6990 mm dia 4 Kg/cm2 PVC Pipes
7075 mm dia 4 Kg/cm2 PVC Pipes
71Item No. 12 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.PCC 1:2:4 (M-150 ) grade for encasing
72Item No. 13 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) Sluice Valve 65 mm dia
73Sluice Valve 80 mm dia
74Sluice Valve 100 mm dia
75Item No. 14 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
76Item No. 15 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
77Item No. 16 - HydraulictestingofG. I.pipelinetospecified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessaryequipments,labouroperationcharges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.GI Pipe 65 mm dia Class- B
78Item No. 17 - Hydraulic testing of PVC pipe line to specified pressure includingcost ofall materialsandlabourandwaterfortestingfor specifiedlengthincludingcutting,placingend capmakingarrangementforfillingsafewater usingreciprocatingtypepumpswhichshould beabletoprovidespecifiedtestpressure gauges and other necessary equipments, labour,operationcharges,etc.requiredfor testing.Therateunderthisitemshallalso includecostofretesting,ifnecessaryand reinstating to original position.160 mm dia 4 Kg/cm2 PVC Pipes
79110 mm dia 4 Kg/cm2 PVC Pipes
8090 mm dia 4 Kg/cm2 PVC Pipes
8175 mm dia 4 Kg/cm2 PVC Pipes
82Item No. 18 -Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3 mm frame with properly cross braced M.S.angles of size 35 mm x 35 mm x 3 mm duly painted including Two M.S.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65 m long painted withal ternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.Spec. Number As directed by Engineer in Charge MORTH 801
83Sub Work No. 7 - Trial RunItem No. 1 - Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Trial Run for Single village 3 Months
84TCL Requirement
85MSEB charges
86Provision for MSEB Charges

AI Tender Summary

OUR REF NO 30962588
AUTHORITY Government Departments
TENDER VALUE 1.47 Crore
LAST DATE 17-02-2022
Authority
Authority Name Rural Development Department
Work Description Under Jal Jeevan Mission Programme Pandhurli Supply Scheme Tal. Sinnar Dist.Nashik
Basic Detail
Tender No 2021-2022/JJM/TN-04/88-Works
Bidding Type Tender
Location
City sinnar
State Maharashtra
Key Dates
Publish Date 04 Feb 2022
Submission Date 17 Feb 2022
Open Date 19 Feb 2022
Finance
Tender Value 1.47 Crore
Tender Fee 5900
EMD 1.48 Lakhs
Exemption Not Available
Document List
e674a85f-d390-4afc-999a-5c20b1eb3dd3.html
BOQ_1317278.xls
DraftTenderPaper.pdf
Pandhurli-sinner.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 04, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 17, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 19, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

e674a85f-d390-4afc-999a-5c20b1eb3dd3.html

xls

BOQ_1317278.xls

pdf

DraftTenderPaper.pdf

pdf

Pandhurli-sinner.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender