Water Supply And Sanitary Fittings Of Pmgsy Circle Leh Building ( State Sector )
Tender Value
19.70 Lakhs
Estimated cost
Bid Submission
24 Feb 2022
0 days left
EMD
39400
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh Ladakh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Water Supply And Sanitary Fittings Of Pmgsy Circle Leh Building ( State Sector )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C . .pan) with seat and lid,10 litre low level white P.V.C. flushing cistern includingflush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixtures,complete including cutting and making good the wallsand floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid. |
| 2 | Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the walls whereverrequired:(A) White Vitreous China White Vitreous China Wash basin size630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 3 | Providing and fixing white vitreous china pedestal for washbasin completely recessed at the back ,f, or the receptionof pipes and fittings. |
| 4 | Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets andstainless steel plug 40 mm including painting of fittingsand brackets, cutting and making good the walls whereverrequired:61 Ox460mm bowl depth 200mm |
| 5 | Providing and fixing 600x450 mm bevelled edge mirror ofsuperior glass (of approved quality) complete with 6 mmthick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. |
| 6 | Providing and fixing 600x120x5mm glass shelf with edgesround of supported on anodised aluminium angle framewith C. P. brass brackets and guard rail complete fixedwith 40 mm long screws, rawl plugs, etc. complete |
| 7 | Providing and fixing P.V.C waste pipe for sink or washbasin including PVC waste fittings complete:flexible pipe 32mm dia |
| 8 | Providing and fixing P.V.C waste pipe for sink or washbasin including PVC waste fittings complete:flexible pipe 40mm dia |
| 9 | Providing and fixing soil, waste and vent pipes : 100 mm dia.Centrifugally cast (spun) iron S&S pipe as per IS:3989 |
| 10 | Providing and filling the joints with spun yarn cementslurry and cement mortar 1:2 (1 cement: 2 fine sand) inS.C. I I C. I pipes 100 mm dia. pipe |
| 11 | 19.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/Cast Iron (spun) pipe embedded in and including cement concrete blocks 1 Ox1 Ox1 0 em of 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stoneaggregate 20 mm nominal size ) including cost of cutting holes and making good the walls etc:For 100 mm dia. pipe |
| 12 | Providing and fixing bend of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nutscomplete: 100 mm dia.Sand cast iron S&S as per IS: 1729 |
| 13 | Providing and fixing collar :Sand cast iron S&S as per IS: 1729 |
| 14 | Providing and fixing trap of self cleansing design withscrewed down or hinged grating with or without vent armcomplete, including cost of cutting and making good thewalls and floors :100 mm inlet and 100 mm outletSand cast iron S&S as per IS:3989 |
| 15 | Cutting chases in brick masonry walls for followingdiameter sand cast iron I centrifugally cast (spun) ironpipes and making good the same with cement concrete1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate12.5 mm nominal size) including necessary plaster andpointing in cement mortar 1:4 (1 cement :4 coarse sand):100 mm dia. |
| 16 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality andcolour: 600 mm long towel rail with total lengthof 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 17 | Providing and fixing toilet paper holderC.P. brass |
| 18 | Providing and fixing 3 layer PP-R (Poly propylene Randomcopolymer) pipes SOR 7.4 UV stablized and anti-microbialfusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threadedPolypropylene random fitings 1/C fixing the pipe with clampsat 1.00m spacing. This includes cost of cutting chases andmaking good the same including testing of joints completeas per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.)PN-16 pipe,Inner Pipe25 mm dia |
| 19 | 32 mm dia |
| 20 | Providing and fixing 3 layer PP-R (Poly propylene Randomcopolymer) pipes SDR 7.4 UV stablized and anti-microbialfusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threadedPolypropytene random fitings 1/C trenching, refilling andtesting of joints complete as per direction of Engineer-incharge.(External work)25 mm dia |
| 21 | 32 mm dia |
| 22 | Providing and fixing brass stop cock of approved quality.20 mm nominal bore |
| 23 | Providing and fixing 3 layer PP-R (Poly propylene Randomcopolymer) pipes SDR 7.4 UV stablized and anti-microbialfusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threadedPolypropytene random fitings 1/C trenching, refilling andtesting of joints complete as per direction of Engineer-incharge.(External work) 40mm dia |
| 24 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent havingvalid lSI license]. |
| 25 | Providing and fixing ball valve (brass) of approved qualitycomplete20 mm nominal bore |
| 26 | Providing and fixing uplasticised PVC connection pipe withbrass unions15 mm nominal bore |
| 27 | Providing and fixing C.P. brass bib cock of approved qualityconforming to IS : 8931a) 15 mm nominal bore |
| 28 | Providing and fixing C.P. brass long nose bib cock ofapproved quality conforming to IS standards and weighingnot less than 810 gms.a) 15 mm nominal bore |
| 29 | Providing and fixing C.P. stop cock (concealed) of standarddesign and of approved make conforming to IS : 8931a) 15 mm nominal bore |
| 30 | Providing and fixing C.P. brass angle valve for basin mixerand gyser points _of approved make conforming to IS : 8931a) 15 mm nominal bore |
| 31 | Providing and fixing PTMT soap dish holder having length of138mm, breadth 1 02mm, heigth of 75mm with concealedfitting arrangements, weighing not less than 1 06gms. |
| 32 | Providing and fixing PTMT grating of approved quality andcolour.Circular type100 mm nominal dia. |
| 33 | Constructing brick masonry manhole in cement mortar1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size), foundation concrete1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stoneaggregate 40mm nominal size) inside plastering 12 mmthick with cement mortar 1:3 ( 1 cement: 3 coarse sand)finished with floating coat of neat cement and makingchannels in cement concrete 1:2:4 (1 cement: 2 coarsesand : 4 graded stone aggregate 20mm nominal size)finsihed with a floating coat of neat cement complete asper standard design.Inside size 90x80 em and 45 em deepincluding C.l. cover with frame (light duty) 455x61 Omm.internal diamensions total weight of cover and frame tobe not less than 38 kg (weight of cover 23 kg and weightof frame 15 kg) With F.P.S. bricks with class designation 75 & with (a) Crushed stone aggregate |
| 34 | Providing and fixing Ceramic gla.zed floor tiles 300x300mm (thickness to be specified by the manufacturers) of1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour suchas White, Ivory, Grey, Fume Red, Brown laid on 20 mmthick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rsesand) including pointing the joints with white cement andmatching pigment etc., complete. |
| 35 | Providing and fixing 1st quality ceramic glazed tilesconforming to IS :·13753 of minimum thickness 5 mm ofapproved make like NITCO, ORIENT, SOMANY KAJARIA,or equivalent make in all colour, shades except begundy,bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarsesand) and jointing wtih grey cement slurry@ 3.3 kg persqm including pointing in white cement mixed withpigment of matching shade complete. |
| 36 | Providing and fixing white vitreous china flat back or wallcorner type lipped front urinal basin of 430x260x350mmand 340x41 Ox265 mm sizes respectively with automaticflushing cistern with C. I./M.S. brackets standard size ofG. I. flush pipe and C.P. brass spreaders with brass unionsand G. I. clamps complete, including painting of fittingsand brackets, cutting and making good the wafls andfloors wherever required:One urinal basin with 5 litre P.V.C whiteautomatic flushing cistern of approved quality. |
| 37 | Providing and fixing fully automatic hand drier |
| 38 | Providing and fixing fully automatic hand sanitizer dispenser |
| 39 | Providing and fixing of insulation works on PPR pipe by way of using K flex, heating wire, polythene, glass wool, chicken meshcomplete job.(Outer pipe),Inner Pipe 25 mm dia |
| 40 | 32 mm dia |
| 41 | Providing and fixing of insulation works on PPR pipe by way of using K flex, heating wire, polythene, glass wool, chicken mesh and cover with aluminium foil complete job.(Outer pipe)(External work) 25 mm dia |
| 42 | 32mm dia |
| 43 | Insulation of Polyethylene water storage tank using K flex, polythene, glass wool, chicken mesh and cover with aluminium foil complete job.Complete job |
AI Tender Summary
Tender Timeline
Feb 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender