|
| 1 | Civil WorksFLOORINGIndoor PVC Badminton Court Flooring ( 4-7.5mm thick) with labour charge |
| 2 | BADMINTON PIPE (100 mmDIA) High quality mild steel pipe |
| 3 | PLUMBING & SANITARY WORKSProviding and fixing Coat Hook of approved quality. |
| 4 | Supplying,Storing,handling,shifting,installation,testing and commissioning of CP flxible hose,spary wall flange etc.complete (1) Kerovit make (model-KA580002).(2) Hindware make model-F1600002)Rs.=1570.(3) Parryware Make (Model-T9941A1) Rs.=1600 |
| 5 | Providing and fixing straight type macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of Mcalpine,UK with intergral single mould sealing fins made of flexble EVA body,including bush/adoptor for use with C.I Pipe as supplied with the pan connector. |
| 6 | ELECTRICAL WORKSSupplying and fixing single wall mounted 18/22 watt LED type batten fitting complete with electronic driver and LED tube etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required. |
| 7 | Supplying and fixing batten/ angle holder including connection etc. as required. |
| 8 | POWER DISTRIBUTION BOARD FOR AUXLIARY LOADS (PDB-1)Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Aux.Power dist. Boards( Aux.PDB),fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, free standing , dust and vermin proof, (degree of protection-IP42)with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as requiredin case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and boltsused shall be Galvanized and Zinc passivated)As per Specification. |
| 9 | The PDB-1 shall broadly comprise of the following equipment/components)Incoming Feeders:-160A TPN , MCCB (P-2), 35 kA - 01 No.Outgoing Feeders:-100A TPN MCCB - 01 No., 63A TPN MCB - 07 Nos., 40A TPN MCB, - 08 Nos. |
| 10 | 200A TPN Aluminium bus bar in metal encolsure with fixing clampsIndication lamps(On- Off Trip Power On --RYB)Supplying, Installing, Testing & Commisioning cost of Power Distribution Boards (PDB-1) all complete with all necessary items as per direction of E/I. |
| 11 | FEEDAR PILLER |
| 12 | GST @ 12% |
| 13 | Labour cess @ 1% |
