Supplying, Installation, Commissioning And Testing Of Hsc Centrifugal Pump Set With All Its Components Under D.W. And S. Mechanical Urban Division, Ranchi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Feb 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dhurwa → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying, Installation, Commissioning And Testing Of Hsc Centrifugal Pump Set With All Its Components Under D.W. And S. Mechanical Urban Division, Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installation commissioning & testing of Horizontal split casing centrifugal pump (make:- Kirloskar/ WPIL/ Mather &Platt ) having maximum efficiency (update modification) on 115 feet head. Driven by 100 HP squirrel cage induction motor (Make:- ABB/Kirloskar/Crompton Greaves) operated on 415±10%, 3 phase, 50 Hz, A.C. supply having speed 1460-1500r.p.m. including cost of supplying, fitting all required accessories as C.I. D.F sluice valve, N.R. valve, bend and suitable sizeof M.S. pipe in delivery line with special flanges 1 set and all required allied work. |
| 2 | Supplying, fitting and commissioning of FASD ML-12 starter to operate induction motor working on 415V, 3 phase, 50 Hz (make L&T/ Schneider / Havells/) suitable for 125 HP motor. |
| 3 | Dismantling of old P.C.C foundation work including stacking serviceable materials in countable stack within 15 m lead and disposal of unserviceable materials with all lead complete as per direction of E/I (1.96 m x0.99 m x 1.22 m)= 2.37 m3. |
| 4 | Construction of new foundation providing P.C.C. M200 with nominal mix of ( 1:1.5:3) with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering mixing cement in mixer and placing in position, vibrating, sticking, curing with all taxes and royalty all complete as per specification and direction of E/I. (2.13 m x 1.22 m x1.22 m) = 3.17 m3 |
| 5 | Supplying, installation and commissioning of free standing type floor mounting industrial panel board comprising of 630 Amp copper bush bar-4 nos. in M.S. steel to 16 SWG sheet of housing and consisting of 630 amp TPN MCCB-1 no. as incoming feeder 400 Amp. TP MCCB-2 nos. (1W+1S) as outgoing feeder with ampere meter with selector switch -3 nos., 0-500 V meters -1 no., CT coil, phase indicator and ON/OFF indicating lamp, single phase preventer, 63 Amp MCB-01 no. and 32 Amp switch fuse unit-1 no. for internal and external light load and doing internal connection with copper wire etc as required and testing on full load. Make any reputedISI mark. |
| 6 | Supplying and laying of 70 sq. mm 3 core PVC insulated and unarmoured 1.1 KV gradecopper cablewith ISI mark including cable socket fitting from panel board to FASD starter and FASD starter to induction motor. Make:- Pollycab/KEI/any reputed ISI mark. |
| 7 | Supplying all materials labour, tools and tackles for making chemical earthing station by doing new earth pit, masonry work and supplying 3\" dia G.I. pipe, copper earth plate (600 mm x600 mm x6mm) salt, charcoal etc. as per IE rule. |
| 8 | Cost towards providing & fixing 25x6 mm G.I. strip 0.5 mtr. below ground as strip earth electrode including soldering from earthing point to motor and control panel. |
| 9 | Cost towards supplying all labour and technician for complete wiring of pump chamber with 3/20 PVC copper wire 1 coil, conduit pipe-10\" long- 6 nos. and wooden board with switch and socket- 4 nos. holder with 30 watt LED bulb ( make:- Philips/Bajaj) |
| 10 | AB Switch with Earth Switch suitable for 11 KV line rotating type with supplying approved make HT type gang operated air break triple switch with earth switch of required capacity with 3 post/pin type insulator per phase, mounted in horizontal or vertical position on provided cross arm with adequate length of G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground with necessary clamps. |
AI Tender Summary
Tender Timeline
Feb 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender